AMINY TWS-7 User manual

Brand: AMINY

Model: TWS-7

Type: User manual

TWS Bluetooth headset

Instructions Manual

★Please comply with local rules when you driving and using earphone

★Please put all the equipment and accessories in a position where the

children can’t get it , swallowed parts may cause choking and serious

consequences

★Please do not put the equipment in hottest or coldest place( Below

zero degree, Above 45 degree),that will cause deformation of equipment,

reduce equipment charging capacity, shorten service life

★Please do not wet equipment and operating it with a wet hand, Liquid

can cause equipment damage, Equipment damage caused by water does

not make the warranty scope

★High volume listening for a long time that can damage your hearing,

please use the minimum volume when you talking or listening to music

Matters need attention

Overview as shown in Figure

1. Power ON：Long press the MFB key for about 2 seconds, red and blue lights

flashing alternately with the shutdown prompt tone.

2. Power OFF：Long press the MFB key for about 3 seconds, and there is a hint of

sound "drop" sound.

3. Pair connection：Open the connection device Bluetooth click search to find the

corresponding item name Click pairing, the pair of successful blue lantern flash, and

a voice prompt "drop" sound.

4. Answer phone：Click the state of the FMB button once, there is a hint of sound

"drop" sound.

5. Hang up：Click the state of the FMB button once, there is a "drop" sound.

6. At the end of number redial：Phone and Bluetooth headset connection standby,

double-click the FMB key once.

7. Reject a call: call state long press FMB key for about 2 seconds to release, and a

tone to "drop" sound.

8. Cancel dialing: press the MFB key once in the dialing status and have a "drop" of

the prompt.

9. Low power alarm: the voltage is lower than 3.2V will prompt "drop" sound.

10. Low power off: when the battery voltage is lower than 3.0V, the headset will

automatically shut down.

11. Automatically back even: connect the pair the headset with mobile phone,

mobile phone and Bluetooth headset is open and shut down after the restart, the

Bluetooth Bluetooth headset automatically back even when the mobile phone will

leave; and disconnect the signal beyond the range, about 3 minutes back about 5

meters of Bluetooth will automatically connect back.

12. Music play / pause: with the phone connected to open the player under the

status of a short press the FMB key, music playback.

13. Three party call: in the first call to answer the call, there are second calls, if you

press the FMB key can pick up the second calls, to retain the first calls. Press the FMB

key again, continue to call first calls, hang up the second calls.

1. TWS intelligent headset pairing: two Bluetooth headset and long press the MFB

button for about 3 seconds with red and blue lights flashing on the voice; when two

headset choose one long press the power button to enter the ears about a second

pairing, after successful pairing with the host red and blue lights flashing blue lights

Single Bluetooth ear basic function operation

TWS ear Bluetooth headset operation

flash 5 seconds side machine at a time; when the main headset pairing is successful.

2. With the mobile phone pairing: only the main ear to the mobile phone pairing

from mobile phone equipment to find the corresponding Bluetooth name matching;

matching timeout after entering the connectionless standby, automatic shutdown,

and with the machine voice tone.

3. Call function: the call function can only be operated by the main earphone, and

the auxiliary ear will be in a state of no functional standby.

4. Music play / pause: the main headset headset click any one of the MFB button

can play music, if you want to pause playback repeat operation can be.

5. Shutdown: the main pair of headphones in the pairing connection state, any long

press the MFB key for about 3 seconds, and there is a hint of sound "drop" sound,

then the two headphones off at the same time.

Bluetooth version：V4.1

Support protocol: headset hands-free Bluetooth audio transmission

Working area: accessibility of about 10 meters

Grade：Class 2

working frequency：2.402~2.48GHz

Charging voltage：5V

Battery capacity：40 mAh

Charging time：About 1.5 hours

Talk time：About 2 hours

Standby time：About 120 hours

Music playing time：About 2 hours

1.dual USB interface

2.total output：5V~1 A

3.Input：5V~1 A

Product Specification

Multi function parameters of emergency power supply

4.Battery capacity：700mAh

Emergency power indicator light: The red light flashes when the emergency power

supply is supplied, and when the battery is charged, the red light is bright; when the

power supply is supplied to the mobile phone or other equipment, the blue light is

turned on when the external discharge is switched on, and the blue light is turned off

at the end of the discharge.

Note: Bluetooth headset pictures for reference only, in kind prevail

Guarantee Card

PO Number

Date:

Name

sex

Age

Address

Tel

Code

place of purchase

Unit price

Order

Number

Product name

Product

model

Dealer signature

Customer

signature

The warranty

1. If the goods with performance failures occur or broken package ,we can change it

into same good item within 3 month , but not including artificial damage.

2. One year Guarantee ,not including accessories.

3. The warranty service will only be effective under exactly use.

4. The warranty is not include all the artificial damage, open machine, stripping,

improper use that caused product broken. Please provide this guarantee card when

you need repair or replace the good, if without this card ,the warranty should be

failure.

With this card warranty

Please note that the

AMINY TWS-7 User manual

Brand: AMINY

Model: TWS-7

Type: User manual

Download PDF

report

AMINY TWS-7 User manual

AMINY TWS-7 User manual

Related papers

Other documents