Astria Fireplaces Spectra Instruction Sheet

Astria Fireplaces
Brand
Astria Fireplaces
Model
Spectra
Type
Instruction Sheet

This manual is also suitable for

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
P/N 750151M Rev. B 05/2015
HEARTH PRODUCTS
KITS AND ACCESSORIES
GRILLWORK KITS
1
P750151M
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
GRILLWORK KITS
GENERAL INFORMATION
These grillwork kits are designed to be used in conjunction with the Cast
Iron Facade kits. Together, when installed, these kits complete the front
aspect of the Spectra LSS series gas fireplaces. The kits contain one
upper grill, one lower grill, one modesty shield, eight 1/4-20 securing
screws and these instructions.
INSTALLATION INSTRUCTIONS
Assemble the upper and lower grills to their respective cast iron facade
pieces as detailed below:
Upper Grill
A. Lay the cast iron upper facade piece (arch-shaped piece) on a flat
surface as shown in Figure 1.
B. Position the arched upper grill over this piece and secure with four of
the screws provided in the kit as shown in Figure 1.
NOTE: If the black painted grill option is being used, either side of the grill
may face outward when installed on the fireplace. If the plated grill option
is being used, the side with the polished surface should face outward.
INSTALLATION INSTRUCTIONS FOR GRILLWORK KITS
Model Numbers LSS-GB35 (H0379), LSS-GG35 (H0380), LSS-GN35 (H0381),
LSS-GB40 (H0399), LSS-GG40 (H0400) And LSS-GN40 (H0404)
FOR USE WITH SPECTRA LSS SERIES GAS FIREPLACES
HEARTH PRODUCTS
KITS AND ACCESSORIES
750,151M
REV. A 08/2009
Figure 1 Upper Grill Installation
Upper Cast Iron Facade Piece
1/4-20 Securing Screws
Upper Grill
P750151M
Printed in U.S.A. © 2015 INNOVATIVE HEARTH PRODUCTS LLC
P/N 750151M Rev. B 05/2015
1508 Elm Hill Pike, Suite 108
Nashville, TN 37210
IHP.US.COM
Innovative Hearth Products reserves the right to make changes at any time,
without notice, in design, materials, specifications, and prices, and also to
discontinue colors, styles, and products.
Consult your local distributor for fireplace code information.
2
P750151M
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Printed in U.S.A. © 2002 by Lennox Hearth Products
P/N 750,151M REV. A 08/2009
The manufacturer reserves the right to make changes at any time, without notice, in design, materials,
specifications, prices and also to discontinue colors, styles and products.
Consult your local distributor for fireplace code information.
1110 West Taft Avenue • Orange, CA 92865
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Figure 2 Lower Grill Installation
Lower Grill
A. Set the cast iron lower facade piece with its top up on a flat surface
as shown in Figure 2A. Insert the lower grill, oriented as shown in
Figure 2A, into the opening in the left end of the cast iron piece and
swing the right end to rest against the back mounting surface of the
cast iron piece.
NOTE: If the black painted grill option is being used, either side of the grill
may face outward when installed on the fireplace. If the plated grill option
is being used, the side with the polished surface should face outward.
B. Slide the grill towards the right (arrow direction indicated in Figure
2B ) until the grill and cast iron piece holes align as shown in Figure
2C.
C. Position the modesty shield as shown in Figure 2C, aligning the holes
on the shield with the bottom holes of the lower grill.
D. Fasten the pieces together with the four 1/4-20 screws proved. See
Figure 2C.
*Orient Grill So That Grill Pattern Is As Shown.
Slot Orientation
Indicates
Facade Top
A
B
C
1/4-20 Securing Screws
Lower Grill*
TOP
Lower Cast Iron Facade Piece
TOP
Modesty Shield
  • Page 1 1
  • Page 2 2

Astria Fireplaces Spectra Instruction Sheet

Astria Fireplaces
Brand
Astria Fireplaces
Model
Spectra
Type
Instruction Sheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents