Blackhawk Automotive BH8075 is a hydraulic wheel dolly designed to facilitate the removal and installation of pneumatic tires and wheel assemblies found on many trucks, buses, and trailers. It has a rated capacity of 1500 lbs. and a lifting range of 2 1/4" to 11". The lifting arm dimension is 25 7/8" x 25 1/4" and the tilt range is -2.5o ~ 10o. The wheel dolly is equipped with a 5" hydraulic lift, a load leveler, and a support strap. It also comes with a chain for securing the wheel assembly to the dolly.
Blackhawk Automotive BH8075 is a hydraulic wheel dolly designed to facilitate the removal and installation of pneumatic tires and wheel assemblies found on many trucks, buses, and trailers. It has a rated capacity of 1500 lbs. and a lifting range of 2 1/4" to 11". The lifting arm dimension is 25 7/8" x 25 1/4" and the tilt range is -2.5o ~ 10o. The wheel dolly is equipped with a 5" hydraulic lift, a load leveler, and a support strap. It also comes with a chain for securing the wheel assembly to the dolly.
Blackhawk Automotive BH8075 is a hydraulic wheel dolly designed to facilitate the removal and installation of pneumatic tires and wheel assemblies found on many trucks, buses, and trailers. It has a rated capacity of 1500 lbs. and a lifting range of 2 1/4" to 11". The lifting arm dimension is 25 7/8" x 25 1/4" and the tilt range is -2.5o ~ 10o. The wheel dolly is equipped with a 5" hydraulic lift, a load leveler, and a support strap. It also comes with a chain for securing the wheel assembly to the dolly.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI