Ambiano GT-SPM-10 User manual

Brand: Ambiano

Model: GT-SPM-10

Type: User manual

Ambiano GT-SPM-10 is an electric salt and pepper mill set, powered by six AAA batteries, which can grind salt and pepper to different degrees of coarseness with the help of an adjustable grinding wheel. The mill is easy to use, with a simple on/off switch and an indicator light. It also comes with a protective cap to keep the grinding mechanism clean.

YEAR

WARRANTY

MADE IN CHINA

DIST. & SOLD EXCLUSIVELY BY:

ALDI

BATAVIA, IL 60510

AFTER SALES SUPPORT

service@801service.net

1-866-558-8096

MODEL:

GT-SPM-10

809543

11/2021

SALT & PEPPER

MILL SET

User Manual

Scope of supply/

Device parts

1On/off switch

2End cap

3Casing with mo-

tor and battery

holder

4Grinding material

container for salt

or pepper

5Grinding rod

6Conductor for

light

7Protective cap

8Adjustment wheel

for grinding fine-

ness (coarse/fine)

9Light

10 Battery, AAA,

1.5 V

Scope of supply:

• 2x electric salt/pepper

mill

• 12x AAA, 1.5 V

• Operating instruc-

tions with guarantee

General

Read and keep

operating

instructions

Read the instructions for

use, particularly the safe-

ty instructions, with care,

before using the electric

salt/pepper mill (herein-

after only referred to as

“mill”).

Failure to comply with

these instructions for

use may lead to serious

injuries or damage to the

mill.

Keep the instructions for

use and the till receipt.

If you pass the mill on to

third parties, please also

ensure that you pass on

these instructions for use

for continued use.

Explanation of

symbols

The following symbols

and signal words are

used in these instruc-

tions for use or on the

packaging.

WARNING!

This signal symbol/word

indicates a hazard with

a medium degree of

risk, which could lead to

death or serious injury if

it is not avoided.

CAUTION!

This signal symbol/word

indicates a hazard with a

low degree of risk, which

could lead to minor or

moderate injury if it is not

avoided.

NOTE!

This signal word warns

of possible damage to

property.

This symbol

gives you use-

ful additional

information

about use.

This device

complies with

part 15 of the

FCC Rules.

Operation is

subject to the

following two

conditions:

(1) This device may not

cause harmful inter-

ference, and (2) this

device must accept any

interference received, in-

cluding interference that

may cause undesired

operation.

This equipment has

been tested and found to

comply with the limits for

a Class B digital device,

pursuant to part 15 of the

FCC Rules.

These limits are designed

to provide reasonable

protection against harm-

ful interference in a res-

idential installation. This

equipment generates,

uses and can radiate

radio frequency energy

and, if not installed and

used in accordance with

WARRANTY CARD

SALT & PEPPER MILL SET

the instructions, may

cause harmful interfer-

ence to radio communi-

cations. However, there is

no guarantee that inter-

ference will not occur in

a particular installation.

If this equipment does

cause harmful interfer-

ence to radio or television

reception, which can be

determined by turning

the equipment off and

on, the user is encour-

aged to try to correct the

interference by one or

more of the following

measures:

Reorient or relocate the

receiving antenna. In-

crease the separation

between the equipment

and receiver. Connect the

equipment into an outlet

on a circuit different from

that to which the receiver

is connected. Consult the

dealer or an experienced

radio/ TV technician for

help.

Caution: Changes or

modifications not ex-

pressly approved by the

party responsible for

compliance could void

the user’s authority to

operate the equipment.

Safety

Intended use

The mill is exclusively

designed for grinding

salt and pepper. The mill

is exclusively intended

for private use and is not

suitable for the commer-

cial sector. The mill is not

a toy.

Only use the mill as de-

scribed in these instruc-

tions for use. Any other

use shall be regarded as

improper and can lead

to material damage. The

manufacturer or retailer

shall not assume any

liability for losses caused

by intended or improper

use.

IMPORTANT

SAFE-

GUARDS

• Read all

instructions.

• Close supervision

is necessary when

the appliance is

used by or near

children.

• Avoid contacting

moving parts.

• Do not use out-

doors.

SAVE THESE

INSTRUC-

TIONS

Safety instructions

WARNING!

This article can be used

by persons with reduced

physical, sensory or

mental capabilities or

lack of experience and

knowledge if they have

been given supervision

or instruction concerning

use of the mill in a safe

way and understand the

hazards involved.

− Children may

not play with

the mill. Clean-

ing and main-

tenance by the

user must not be

performed by

children unless

they are 8years

of age and older

and are super-

vised.

− Keep children

away from the

mill.

− Do not leave the

mill unattended

during opera-

tion.

− Do not let chil-

dren play with

the packaging

film. Children

may become

caught in it

while playing

and suffocate.

CAUTION!

Injury hazard!

Improper handling of

the batteries result in

injuries.

− Remove the batteries

from the mill, if they

are depleted or if you

are not using the mill

for a longer period of

time. This way, you can

avoid leaking battery

acid.

− Do not expose the bat-

teries to any extreme

conditions by e.g.

laying them on a radi-

ator or exposing them

to direct sunlight. This

increases the risk of

the batteries leaking.

NOTE!

Risk of damage!

Improper handling of

the mill may result in

damage.

− Make certain that you

have inserted the bat-

teries with the correct

polarity (+/-), in order

to avoid damaging

the mill.

− If necessary, clean the

battery and device

contacts prior to

insertion.

− Do not mix old and

new batteries. Do not

mix alkaline, stan-

dard carbon-zinc, or

rechargeable batter-

ies.

− Do not ﬁll the grind-

ing material container

right up to the top

edge, please note the

maximum ﬁling level

(approx. 80 %).

− The salt crystals may

expand from mois-

ture, so that the con-

tainer could burst.

− Only switch the mill

on, if it is ﬁlled with

grinding material

(salt or pepper). Oth-

erwise, the grinding

mechanism may be

damaged.

− Do not make any

modiﬁcations to

the mill. Only allow

repairs to be carried

out by a profession-

al workshop and

pay attention to the

guarantee conditions.

The mill may become

damaged due to

non-professional

repair.

Prior to initial use

Unpacking and

inspection

1. Check whether the

delivery is complete

(see Fig. A and B).

2. Take the mill out of

the packaging and

check whether the

mill or the spare parts

are damaged. If this

Model: r White/Gold r Black/Gold

Please contact our AFTER SALES SUPPORT by phone or e-mail before

sending in the item.

This allows us to provide support in the event of possible user errors.

Only submit Warranty Card in the event a warranty claim is needed due

to a faulty item.

AFTER SALES SUPPORT

809543

MODEL:

11/2021

GT-SPM-10

PRODUCT CODE

Wuensche USA Inc.

801 Circle Avenue

Forest Park, IL 60130

PO51030156

SERVICE CENTER

Description of problem:

Your details:

Name:

Address:

E-Mail:

[email protected]

1-866-558-8096

01 Salzpfeffermuehle USA EN 2021.indd 101 Salzpfeffermuehle USA EN 2021.indd 1 09.06.2021 10:17:4009.06.2021 10:17:40

ALDI INC. FULL WARRANTY CONDITIONS

Dear Customer:

The ALDI warranty is a full warranty offering you the following benefits:

Warranty period: 3 year from date of purchase.

6 months for movable parts and consumables

under normal and proper conditions of use

(e.g. rechargeable batteries).

Costs: Free repair/exchange or refund.

No transport costs.

Hotline 1-866-558-8096 Toll free phone number.

Operating hours: Available from Monday to Friday, 8am-6pm (EST).

Please contact our service hotline by phone, e-mail or fax before sending

in the device. This allows us to provide support in the event of possible

operator errors.

In order to make a claim under the warranty, please send us:

• The faulty item with all component parts, the original receipt and

the warranty card properly completed.

The warranty does not cover damage caused by:

• Accident or unanticipated events (e.g. lightning, water, ﬁre).

• Improper use or transport.

• Failure to follow the safety and maintenance instructions.

• Other improper treatment or modiﬁcation of the product.

After the expiration of the warranty period, you may choose to have your

product repaired at your own expense. You will be notified of the repair

costs in advance.

This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state but this warranty is not intended to

exceed statutory minimum requirements beyond what is included above.

This warranty does not limit the statutory obligation of the seller arising

from any implied warranties. The period of warranty can only be extended

in accordance with applicable law.

Neither the service company nor ALDI will assume any liability for data or

settings stored on any returned product.

US is the case, do not use

the mill. Contact the

manufacturer.

3. Remove the pack-

aging material and

all protective films

and dispose of these

properly.

Inserting/replacing

batteries

WARNING!

Danger of poisoning!

Batteries can be life-en-

dangering if swallowed.

− Therefore, keep the

mill and batteries

out of reach for small

children. If a battery

has been swallowed,

immediately contact

a physician.

− Avoid contact by

battery fluid with

the skin, eyes and

mucous membranes.

When coming into

contact with battery

fluid, immediately

rinse the affected

area with clear water

and contact a physi-

cian.

WARNING!

Fire and explosion

hazard!

Improper handling of

the batteries result in

injuries.

− Do not recharge the

batteries and do not

try to reactivate them

using other means.

− Do not dismantle the

batteries.

− Never throw batteries

into fire.

− Do not incinerate this

appliance even if it is

severely damaged.

The batteries can

explode in a fire.

− Never short-circuit

the batteries.

To replace the batteries,

proceed as follows:

1. Hold the casing 3

tightly and turn the

end cap 2 with your

other hand, count-

er-clockwise, as far as

it will go.

The mark on the

end cap must

point to the open

lock symbol.

2. Remove the battery

holder from the

casing.

3. Remove the old bat-

teries. Please note the

disposal instructions.

4. Insert six new batter-

ies 10 (type AAA) as

shown on the base of

the battery holder.

Pay attention to the

correct polarity (+/-).

5. Put the end cap back

on and turn it clock-

wise, as far as it will

go.

The mark on the

end cap must

point to the closed

lock symbol.

Fill with grinding

material

1. Hold the casing 3

firmly.

The grinding material

container 4 is point-

ing downwards.

2. Turn the grinding

material container

4 counter-clock-

wise as far as it will go

with your other hand.

The marking on

the housing must

point to the open

lock symbol on

the grinding ma-

terial container.

3. Pull off the spice

chamber in a down-

wards direction.

4. Fill the grinding mate-

rial container up to

80% with salt crys-

tals or peppercorns.

5. Put the casing onto

the grinding material

container and turn

the grinding material

container clockwise.

The marking on

the housing must

point to the closed

lock symbol on the

grinding material

container.

The mill is now locked

and ready for use.

Use

NOTE!

Risk of damage!

Improper use of the mill

may result in damage.

− Only switch the mill

on, if it is filled with

grinding material

(salt or pepper).

The advantage of a mill

is that it only grinds the

salt or pepper once you

require the respective

ingredient. This way, the

spice has more flavour.

1. Remove the protec-

tive cap 7.

2. Hold the mill over the

food to be seasoned

and press the on/

off switch 1. The

grinding mechanism

and lamp 9 remain

switched for on as

long as you press the

on/off switch.

3. Replace the protec-

tive cap after use.

If the mill

is blocked,

the grinding

mechanism

has a blockage.

In this case, the mill

must be shaken slight-

ly, put upside-down

and briefly switched

on.

Set degree of

fineness

1. Remove the protec-

tive cap 7.

2. Turn the mill upside-

down and switch it

on briefly, in order

to free the grinding

mechanism.

3. Turn the adjusting

wheel for the degree

of fineness 8 in the

middle of the grind-

ing mechanism in the

appropriate direction.

Please note the arrow

marker and +/- marks

(see Fig. B).

Coarse degree of

fineness:

− Rotate counter-clock-

wise in the “+” direc-

tion.

Fine degree of fineness:

− Rotate clockwise in

the “-” direction.

Troubleshooting

No function.

− Inserting new bat-

teries.

− Insert the batteries in

the right direction.

The mill is grinding, but

nothing is coming out.

− Remove protective

cap 7.

− Do not turn the

adjustment wheel for

the degree of ﬁne-

ness 8 clockwise as

far as it will go.

If the LED no

longer lights

up, it is not

possible to re-

place the lamp.

Cleaning

NOTE!

Risk of damage!

Improper cleaning of

the mill may result in

damage.

− Do not immerse the

mill or parts of it in

water or other liquids.

− Never use hard,

scratching or abra-

sive detergents or

similar, for cleaning

the mill. You might

scratch the surface

this way.

1. Wipe the mill clean

with a soft, slightly

dampened cloth.

2. To clear the device

of residues, turn the

mill upside down and

switch it on briefly.

Storage

If you do not use the mill

for a longer period of

time:

1. Remove the batteries.

2. Remove the grounds

from the spice

chamber.

3. Store the grinder in

a dry and frost-free

place.

Technical data

Model: GT-SPM-10

Battery: 12x 1.5 V

AAA

9 V , 9 W

Product

number:

809543

Because our products

are constantly being

further developed and

improved, design mod-

ifications and technical

changes are possible.

You can also download

these operating instruc-

tions as a PDF fi le on the

www.gt-support.de

website.

Disposal

Disposal of

packaging

Sort the packaging be-

fore you dispose of it. Dis-

pose of paperboard and

cardboard with the re-

cycled paper service and

wrappers with appropri-

ate collection service.

Disposing of the mill

Should the mill no lon-

ger be capable of being

used at some point in

time, dispose of it in

accordance with the reg-

ulations of your state or

country.

Please ensure your recy-

cling information does

apply to the local regula-

tions and the EPA recom-

mendations

(www.epa.gov).

Batteries and recharge-

able batteries may not

be disposed of with

household waste!

As the end user, you

are required by law to

bring all batteries and

rechargeable batteries,

regardless whether

they contain harmful

substances* or not, to a

collection point run by

the local authority or to

a retailer, so that they

can be disposed of in an

environmentally friendly

manner.

* labelled with: Pb = lead

01 Salzpfeffermuehle USA EN 2021.indd 201 Salzpfeffermuehle USA EN 2021.indd 2 09.06.2021 10:17:4009.06.2021 10:17:40

Ambiano GT-SPM-10 User manual

Ambiano GT-SPM-10 User manual

Ambiano GT-SPM-10 User manual

Other documents