Kamado Joe KJ15041123 18 Inch Red Digital Charcoal Grill and Smoker User manual

Hello! I've reviewed the instructions for the KAMADOJOE Rear Module KJ15041123/KJ15041523. This document provides safety guidelines and step-by-step procedures for handling the rear module, including disassembly and installation. I'm ready to answer any questions you have about the instructions or the device described in the document.
What should I do before handling the grill?

Do I need to fully remove the screws to disengage the rear module?

What should I keep in mind when reinstalling the rear module?

KJ15041123/KJ15041523

CAUTION - SAFETY PRECAUTIONS - READ BEFORE USE

• Make sure your grill has fully cooled before handling to avoid burns.

• Some components may have sharp edges. Use caution to avoid injury.

• Disconnect the power supply from the grill before handling.

Instruction Sheet Code: 9804220060 221115-GH

Konnected Joe™

Rear Module

Unplug lid switch, pit probe, and power supply.

Loosen two screws from rear module.

Please note, the screws do not have to be fully

removed to disengage the rear module.

Disconnect the wire harness from the rear

module. Use caution do not apply tension on

the wire harness.

5-PIN

6-PIN

Repeat the steps in reverse order to install the

new rear module. *Note – when reinstalling

the rear module, be sure the fan tube is fully

seated in the grill body.

FAN

TUBE

4-PIN

2-PIN

ELEMENT

WIRE