2. Aura Light
  3. PipeLED High-quality Pipe Luminaire

Aura Light PipeLED High-quality Pipe Luminaire User manual

  • Hello! I've reviewed the installation manual for the Aura Light PipeLED. This document outlines the necessary steps for setting up the LED light fixture, including wiring, mounting and beam angle adjustments. It also mentions that the light source is not replaceable. I'm ready to answer your questions about the installation process or any other aspects described in this manual.
  • What cable size is used for the PipeLED?
    What is the required wire stripping length?
    Is the light source replaceable?
Aura Light AB, Sweden
Phone customer service +46 (0)20 32 30 30
[email protected], www.auralight.com 2022-04-13
PipeLED
Installation manual – PipeLED with mounted cable
I-182
- mm
: Used for cable e, ,-, mm (AWG )
: Solid cable end
: Wire stripping - mm
1
Extra breather need to be paid additionally.
2
3
DALI ONOFF
Brown L L 
Greenyellow 
Blue N N 
Black DIM+DA+ -
Grey DIM-DA -
Aura Light AB, Sweden
Phone customer service +46 (0)20 32 30 30
[email protected], www.auralight.com
Ceiling installation
Step 
Step 
Disconnect the power, then connect wires on the end caps.
Step 
Install the suspension xed bushings.
Step 
Install PipeLED light and adjust beam angle.
SPARE PARTS QUANTITY
PipeLED  
Clips  
Self-tapping screws
Rubber washers
Expansion plastic screws
2022-04-13
I-182
Non-replaceable light source. Replaceable control gear by a professional.
Maintaince hints
/