Kärcher HDC Standard Product information
- Category
- High-pressure cleaners
- Type
- Product information
Kärcher HDC Standard is a stationary high-pressure cleaner suitable for simultaneous use by 1 to 8 users. With a pressure of up to 80 bar and a flow rate of 700–8000 l/h, it can handle various cleaning tasks. It features intelligent pump control, modular design, and a water treatment unit, making it efficient and reliable. Accessories like trigger guns, rotating spray lances, and nozzles allow for customization to specific cleaning needs. The HDC Standard is ideal for heavy-duty cleaning in industrial, commercial, and agricultural settings.
Kärcher HDC Standard is a stationary high-pressure cleaner suitable for simultaneous use by 1 to 8 users. With a pressure of up to 80 bar and a flow rate of 700–8000 l/h, it can handle various cleaning tasks. It features intelligent pump control, modular design, and a water treatment unit, making it efficient and reliable. Accessories like trigger guns, rotating spray lances, and nozzles allow for customization to specific cleaning needs. The HDC Standard is ideal for heavy-duty cleaning in industrial, commercial, and agricultural settings.
HDC Standard
Stationary high-pressure cleaner for the simultaneous use of 2 to 8 take-off points
1
2
3
4
Efciency
Water treatment unit
Truckwash
Modular design
Intelligent pump control
HDC Standard, 1.509-500.2, 2020-02-24
HDC Standard, 1.509-500.2, 2020-02-24
TECHNICAL DATA AND EQUIPMENT.
HDC Standard
For 1 to 8 users at the same time
Stationary supply unit
Technical data
Order Number 1.509-500.2
EAN code 4039784398672
Pressure bar / MPa 80 / 160 / 8 / 16
Flow rate l/h 700–8000
Max. water feed temperature °C max. 85
Motor starting softstart
Current type Ph / V / Hz 3 / 400 / 50
Dimensions (L x W x H) mm 1150 × 750 × 1840
HDC STANDARD
1.509-500.2
1 2 3 4–5
HDC Standard, 1.509-500.2, 2020-02-24
Order Number Flow rate Price Description
Trigger guns
High end high-pressure trigger gun 14.775-823.0 High-end spray guns with optimised ow. Small pressure
losses also with water volumes up to 2500 l/h.
Hand trigger gun only for replace-
ment
24.775-825.0
Easy Press high-pressure gun with holding power reduction (Kärcher patent)
Easy press high-pressure trigger
gun with softgrip
34.775-463.0 Easy press high-pressure trigger gun with softgrip. For
high-pressure hoses DN 6 and DN 8 with 11 mm swivel
diameter.
Servo Control
Servo control 44.775-470.0 750–1100 l/h Water ow and pressure control on the trigger gun.
54.775-471.0 1100 l/h Water quantity and pressure regulated directly from the
hand spray gun.
Included in delivery.
Available accessories.
HDC STANDARD
1.509-500.2
1 2, 5 3 4 6 7
HDC Standard, 1.509-500.2, 2020-02-24
Order Number
Max. working
pressure Length Price Description
Rotating spray lances
Rotatable lance, 600 mm, ergono-
mic
14.760-664.0 300 bar 600 mm 600 mm stainless steel lance (manual coupling) with ergono-
mic handle for ease of use and protection. Rotatable 360°
under pressure.
1050 mm lance, rotatable, ergono-
mic
24.760-660.0 300 bar 1050 mm 1050 mm stainless steel lance (manual coupling) with ergo-
nomic handle for ease of use and protection. Rotatable 360°
under pressure.
Lance 1550 mm, rotatable, ergo-
nomic
34.760-661.0 300 bar 1550 mm 1550 mm stainless steel lance (manual coupling) with ergo-
nomic handle for ease of use and protection. Rotatable 360°
under pressure.
Lance 2050 mm, rotatable, ergo-
nomic
44.760-662.0 300 bar 2050 mm 2050 mm stainless steel lance (manual coupling) with ergo-
nomic handle for ease of use and protection. Rotatable 360°
under pressure.
Lance for industrial use, grey 54.760-655.0 300 bar 1050 mm 1050 mm grey, rotatable food-grade lance for use in the
food industry. All parts coming into contact with water are
food safe.
Double lance
Double lance 960 mm 66.394-665.0 310 bar 960 mm 960 mm double lance for variable pressure adjustment on
handle at full water ow rate. Suitable for agricultural use (
e.g. stable cleaning).
Flexible spray lance
Articulated joint M18x1,5 74.481-039.0 300 bar High-pressure articulated joint: Thanks to innite angle
adjustment up to 120°, this tool is ideal to effortlessly clean
hard-to-reach areas. Simply attach to the spray lance of the
pressure washer.
Included in delivery.
Available accessories.
HDC STANDARD
1.509-500.2
1–3 4–7, 9–11 8
HDC Standard, 1.509-500.2, 2020-02-24
Order Number Nozzle size Price Description
Power nozzle spray angle 25°
Power nozzle 25° spray angle 12.113-008.0 43 Fan jet nozzle with 25° spray angle, suitable for large areas
and removing stubborn dirt and stains.
Power nozzle, spray angle 25° 22.113-025.0 55 Flat jet nozzle for large area performance and stubborn dirt.
Triple nozzle, touchless changeo-
ver
32.113-015.0 80 Fan jet nozzle for large-area coverage and stubborn dirt and
stains.
Power nozzle, spray angle 25° 42.883-401.0 55 Fan jet nozzle for large area coverage and stubborn dirt and
stains.
Power nozzle 25° spray angle 52.883-402.0 60 Flat stream large area coverage and stubborn dirt and con-
taminations.
62.883-406.0 80 Fan jet nozzle for large area coverage and tackling stubborn
dirt and stains.
Power nozzle spray angle 40°
Power nozzle spray angle 40° 72.884-525.0 55 Power nozzle with a 40° spray angle and fan jet, suitable for
large areas and sensitive surfaces.
82.884-527.0 80
Power nozzle spray angle 15°
Power nozzle spray angle 15° 92.883-390.0 55 Fan jet nozzle with 15° spray angle suitable for stubborn
dirt.
10 2.883-391.0 60 Fan jet nozzle for stubborn dirt and stains.
11 2.883-394.0 80 Fan jet nozzle with 15° spray angle suitable for stubborn
dirt.
Included in delivery.
Available accessories.
HDC STANDARD
1.509-500.2
1 2 3 4–5 6 7 8
9 10–11
HDC Standard, 1.509-500.2, 2020-02-24
Order Number ID
Max. working
pressure Length Price Description
Standard with unions on both sides
High-pressure hose, 10 m DN 8,
AVS trigger gun connector
16.110-031.0 ID 8 315 bar 10 m 10 m high-pressure hose (M 22 x 1.5) with kink protection.
With patented rotating AVS trigger gun connector and manu-
al coupling. Further data: DN 8/155°C/315 bar.
High-pressure hose packaged 26.391-342.0 ID 8 315 bar 10 m To extend the operating radius with the high-pressure clea-
ner. Connection on both sides M22 x 1.5.
High-pressure hose, 15 m DN 8,
315 bar, including rotary coupling
36.390-010.0 ID 8 315 bar 15 m With rotary coupling, 2 x M 22 x 1.5
High-pressure hose, 20 m DN 8,
315 bar, extension
46.390-031.0 ID 8 315 bar 20 m With M 22x1.5 union at both ends and anti-kink protection
ID 8/155°C/315 bar
High-pressure hose, 15 m DN 10,
220 bar, extension
56.390-023.0 ID 10 220 bar 15 m 15 m high-pressure hose M 22 x 1.5) with kink protection
and threaded couplings at both ends. Further data: DN
10/155°C/220 bar.
Longlife 400 with unions on both sides
High-pressure hose packaged 66.110-038.0 ID 8 400 bar 10 m Durable, 10 m long high-pressure hose (ID 8) with double
steel reinforcement and EASY!Lock hand screw connection
at both ends and ANTI!Twist. Approved for 400 bar pressu-
re.
76.391-354.0 ID 8 400 bar 10 m To extend the operating radius with the high-pressure clea-
ner. Connection on both sides M22 x 1.5.
High-pressure hose Longlife 400,
20 m, DN 8, extension
86.390-027.0 ID 8 400 bar 20 m with rotary coupling, 2 x M 22 x 1.5
Special hoses
High-pressure hose 1.5 m, ID 8,
including connectors, outlet bend
96.388-886.0 ID 8 400 bar 1,5 m
Food industry version with unions on both sides
High-pressure hose, 10 m ID 8,
suitable for food industry, extensi-
on piece
10 6.389-479.0 ID 8 250 bar 10 m 10 m high-pressure hose (DN 8) with patented (rotating)
AVS trigger gun connector. Non-discolouring outer layer for
use in the food industry. M 22 x 1.5 with anti-kink sleeve.
High-pressure hose, 20 m ID 8,
suitable for food industry, extensi-
on piece
11 6.389-581.0 ID 8 250 bar 20 m 20 m high-pressure hose (DN 8) with swivel coupling. Non-
discolouring outer layer for use in the food industry. Con-
nectors at both ends, M 22 x 1.5, with kink protection. NW
8/155°C/250 bar.
Included in delivery.
Available accessories.
HDC STANDARD
1.509-500.2
1 2 3–5
HDC Standard, 1.509-500.2, 2020-02-24
Order Number Flow rate Nozzle size
Diame-
ter Price Description
Hard surface cleaner FR 30 ME
FR 30 ME surface cleaner 12.640-355.0 300 mm Hot water resistant stainless steel surface cleaner with
double ceramic bearings, non-marking swivel castors and
suction hose connection. Ideal for indoor cleaning, e.g. food
industry.
Hard Surface Cleaner FR 50
FR 50 surface cleaner 22.640-679.0 500 mm Hot water resistant stainless steel surface cleaner with 500
mm working width. Ideal for large areas.With double cera-
mic bearings, push handle, non-marking swivel castors and
detergent dosing system.
Machine-specic nozzle kit for FR
Nozzle kit for surface cleaners
(type-specic) 850 - 1100 l/h
32.640-442.0 850–1100 l/h Nozzle kit includes power nozzles and unions. For Kärcher
surface cleaners (850 to 1100 l/h).
Nozzle kit for surface cleaners
(type-specic) 1100 - 1300 l/h
42.639-188.0 1100–1300 l/h Nozzle kit includes power nozzles and unions. For Kärcher
surface cleaners (1100 to 1300 l/h).
Nozzle pack for hard surface
cleaners (machine-specic) 1300
- 1,800 l/h
52.640-781.0 1300–1800 l/h Machine-specic nozzle kit Kärcher power nozzle for hard
surface cleaners
Included in delivery.
Available accessories.
HDC STANDARD
1.509-500.2
1 2 3 4 5 6 7
8 9–10 11 12 14 15 16
HDC Standard, 1.509-500.2, 2020-02-24
Order Number Price Description
Coupling
Coupler -2xM22x1,5 14.111-037.0 Brass double connector for connecting and extending high-
pressure hoses. With rubber protection. Connector: 2x M 22
x 1.5 m.
24.403-002.0
Connector
Nozzle connector/screw connector 34.402-022.0 Nozzle connector/screw connector for connecting high-
pressure nozzles and accessories to the high-pressure trig-
ger gun (with nozzle connector). Connectors: 1x M 22 x 1.5
and 1x M 18 x 1.5.
Take-off point equipment
Hose and spray lance holder VA 42.042-003.0 Hose and spray lance wall holder for practical and safe
storage of high-pressure hoses or spray lances. Stainless
steel wall holder.
High-pressure pipework
Quick-release coupling, xed part 56.463-025.0 xed part
Quick-release coupling, moveable
part
66.463-023.0 loose part
Stationary high-pressure cleaning systems
Trigger gun 74.775-018.0
Double connecting 85.402-001.0
High-pressure ball valve 96.412-066.0
10 6.412-386.0
11 6.412-491.0
Quick release coupling 12 6.463-022.0
Stationary high-pressure cleaners
Central detergent supply 13 3.910-005.0 This cleaning agent supply unit with manual mixing facility
features a connection hose, hose nipple and the necessary
fastening material.
ABS metering unit double HDC 14 2.641-702.0 Dual dosing unit, stainless steel.
Hand trigger gun 15 4.775-784.0 Easy Press trigger gun, grey.
ABS cleaning agents wall bracket
HDC
16 2.641-703.0 Wall bracket for two cans.
ABS cleaning carriage mobile HDC 17 2.641-704.0 Mobile cleaning trolley.
Jet pipe 600 mm 18 4.760-625.0 Spray lance, rotatable, grey, 600 mm.
Jet pipe 1050 mm 19 4.760-626.0 Spray lance, rotatable, grey, 1,050 mm.
Spray lance, rotatable, grey 20 4.760-627.0 Spray lance, rotatable, grey, 1,550 mm.
Jet pipe 2050 mm 21 4.760-628.0 Spray lance, rotatable, grey, 2,050 mm.
Floor fastening set 22 2.638-320.0 Floor xing stands for machine incl. mounting parts.
Screwing piece 23 6.386-011.0
Full-bore valve 24 6.412-022.0
25 6.412-024.0
High-pressure ball valve 26 6.412-067.0
27 6.412-493.0
Foam injector 28 3.637-054.0 Foam injector, 900 l/h, 100-120 bar.
Nozzle for single foam, 900 l/h 29 4.763-207.0 Foam jet, industrial.
Foam nozzle 30 4.767-072.0 Foam jet.
Hose track system high-pressure cleaners
Hose reel, manual, 20 m, stainless
steel
31 2.637-566.0 Hose reel, manual, 20 m, stainless steel
Included in delivery.
Available accessories.
HDC STANDARD
1.509-500.2
HDC Standard, 1.509-500.2, 2020-02-24
Order Number Price Description
Take off point equipment
14.763-927.0
24.775-012.0
Included in delivery.
Available accessories.
HDC STANDARD
1.509-500.2
1
HDC Standard, 1.509-500.2, 2020-02-24
Order Number Length Price Description
Jet tube
Spray lance 14.760-653.0 With nozzle holder.
Included in delivery.
Available accessories.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Kärcher HDC Standard Product information
- Category
- High-pressure cleaners
- Type
- Product information
Kärcher HDC Standard is a stationary high-pressure cleaner suitable for simultaneous use by 1 to 8 users. With a pressure of up to 80 bar and a flow rate of 700–8000 l/h, it can handle various cleaning tasks. It features intelligent pump control, modular design, and a water treatment unit, making it efficient and reliable. Accessories like trigger guns, rotating spray lances, and nozzles allow for customization to specific cleaning needs. The HDC Standard is ideal for heavy-duty cleaning in industrial, commercial, and agricultural settings.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Kärcher K 2 Premium User manual
-
Kärcher HD 13/18-4 SX Plus Product information
-
Kärcher HD 10/25-4 S Product information
-
Kärcher HD 994 User manual
-
-
-
-
-
-
