InWin Polaris RGB / Aluminium User manual

InWin
Brand
InWin
Model
Polaris RGB / Aluminium
Category
Computer cooling components
Type
User manual

InWin Polaris RGB / Aluminium is the perfect addition to any PC build. With its 120mm size, it's the perfect size for most cases, and its RGB lighting will add a touch of style to your rig. The fan is also incredibly quiet, running at just 20.2dB(A), so you won't have to worry about it being too loud.

The InWin Polaris RGB / Aluminium is also incredibly easy to install. Simply screw it into place in your case, and then connect the RGB cable to your motherboard. The fan will then be controlled by your motherboard's RGB software, so you can customize the lighting to match your own personal style.

InWin Polaris RGB / Aluminium is the perfect addition to any PC build. With its 120mm size, it's the perfect size for most cases, and its RGB lighting will add a touch of style to your rig. The fan is also incredibly quiet, running at just 20.2dB(A), so you won't have to worry about it being too loud.

The InWin Polaris RGB / Aluminium is also incredibly easy to install. Simply screw it into place in your case, and then connect the RGB cable to your motherboard. The fan will then be controlled by your motherboard's RGB software, so you can customize the lighting to match your own personal style.

Polaris RGB Fan is controlled by RGB ready motherboards.
Please make sure your motherboard supports RGB lighting.
Silent RGB Case Fan
User Manual‧English
1. Polaris fans x 2
2. Screws x 8
3. RGB Y-Cable (connect motherboard to fan) x 1
4. 8-8 pin long connecting wire
(connect fan to fan) 800mm x 1
5. 8-8 pin short connecting wire
(connect fan to fan) 100mm x 1
6. 4-Pin Header x 1
★ Package Contents
x 2
x 8
x 1
x 1
x 1
x 1
4. Use the RGB Y-Cable 8-pin header to connect the first fan.
5. Use the 8-8 pin long or short connecting wire to connect
other fans.
6. If extra fans are needed, please purchase Polaris RGB single
pack. (Maximum fan connecting suggestion: 8)
★ Installation
Motherboard
Fan
RGB
1. Please make sure the power is off.
2. Install the fans in your PC case, and screw it in the designated
areas.
3. Use RGB Y-Cable to connect the fan and the motherboard.
Please use RGB 4-Pin connector to an RGB header, and 4-pin
fan connector to a fan header on the motherboard.
1. Please install the fan by following our instructions.
2. When storing the fan, please keep this product away
from high temperatures. Keep away from machines
such as heaters that might cause high temperatures.
3. Please do not put anything in the impeller.
4. Please do not modify the wire or the connector
provided by In Win.
5. Please only use your fan in the computer case.
6. Please keep this product away from any liquid.
If your fan does not operate properly, please follow the
instructions below:
1. Please check your system’s power.
2. Please make sure all the connectors are connected
properly.
★ Troubleshooting
★ Note to use
★ Specifications
Product Name
Part Number
Fan Size
Material
Starting Voltage
Fan Rated Voltage
Fan Rated Power
Fan Rated Current
RGB LED Rated Voltage
RGB LED Rated Power
RGB LED Rated Current
Speed Mode
Air Flow
Air Pressure
Noise Level
Bearing Type
Life Expectation
Warranty
Polaris RGB
POLARISFAN-2PK-RGB
120 x 120 x 25mm
PBT, PC
5V
12V
1.2W
0.10A
12V
1.2W
0.10A
500~1280R.P.M
43.31CFM
1.26mm/H2O
20.2dB(A)
Sleeve Bearing
35,000 hrs/ 25℃
2 years
Polaris RGB
★ Specifications
Product Name
Part Number
Fan Size
Material
Starting Voltage
Fan Rated Voltage
Fan Rated Power
Fan Rated Current
RGB LED Rated Voltage
RGB LED Rated Power
RGB LED Rated Current
Speed Mode
Air Flow
Air Pressure
Noise Level
Bearing Type
Life Expectation
Warranty
Polaris RGB Aluminium
POLARISFAN-2PK-RGBM
120 x 120 x 25mm
PBT, PC, Aluminium
5V
12V
1.2W
0.10A
12V
1.2W
0.10A
500~1280R.P.M
43.31CFM
1.26mm/H2O
20.2dB(A)
Fluid Dynamic Bearing (FDB)
60,000 hrs/ 40℃
5 years
Polaris RGB Aluminium
Silent RGB Case Fan
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

InWin Polaris RGB / Aluminium User manual

InWin
Brand
InWin
Model
Polaris RGB / Aluminium
Category
Computer cooling components
Type
User manual

InWin Polaris RGB / Aluminium is the perfect addition to any PC build. With its 120mm size, it's the perfect size for most cases, and its RGB lighting will add a touch of style to your rig. The fan is also incredibly quiet, running at just 20.2dB(A), so you won't have to worry about it being too loud.

The InWin Polaris RGB / Aluminium is also incredibly easy to install. Simply screw it into place in your case, and then connect the RGB cable to your motherboard. The fan will then be controlled by your motherboard's RGB software, so you can customize the lighting to match your own personal style.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents