2. Health & beauty
  3. Blood pressure units
  4. RCB
  5. ADF-B102W Wireless Wrist Type Blood Pressure Monitor

RCB ADF-B102W Wireless Wrist Type Blood Pressure Monitor User guide

  • Hello! I've reviewed the Quick Start Guide for the Blood Pressure Monitor ADF-B102W. This document covers important safety notes, proper measurement techniques, and device usage instructions. I can help answer your questions about this wireless wrist-type monitor, its data transfer capabilities, and how to take accurate readings.
  • Who is not suitable to take blood pressure measurement with this device?
    Can I share my blood pressure monitor with others?
    Can I take blood pressure measurements if I am pregnant?
    What should I do before taking a measurement?
    Where should I place the cuff?
Wireless Wrist Type Blood Pressure Monitor
V 1.0 Remote Care Partners Page 1
Wrist Blood Pressure Monitor
Quick Start Guide
Model # ADF-B102W
NOTES ON SAFETY
Babies, young children or individuals who cannot express their consent are not
suitable to take blood pressure measurement.
Individuals with serious arteriosclerosis are not suitable to take blood pressure
measurement.
Blood pressure readings may change in case of pregnancy. Pregnant women
can consult their doctor before taking measurement.
Self-measurement is not medical treatment. If there are unusual values, please
consult your doctor.
TAKING A MEASUREMENT
Avoid smoking, eating, or exercising for 30 minutes before taking measurements.
Do not allow other people to use your blood pressure monitor. The blood
pressure monitor is specifically assigned to you and you only. Allowing other
people to use your monitor can mislead your provider.
Unless otherwise instructed by your provider, you can take your blood pressure
on either arm.
Remove tight-fitting or thick clothing from your arm. The cuff should be placed
on bare skin.
Wireless Wrist Type Blood Pressure Monitor
V 1.0 Remote Care Partners Page 2
QUICK START
Avoid smoking, eating, or exercising for 30 minutes before taking measurements.
1. Sit upright in a chair with both your feet on the floor.
2. Pull on the end of the cuff until it wraps securely around your wrist. Place your arm
on a table so the cuff is at the same level as your heart.
3. Press the "Start" button on the device. The cuff will
automatically inflate, and the measurement will start. Do
not talk or move around while the measurement is taking
place.
4. When the measurement is complete, the cuff will
automatically deflate, and your systolic & diastolic
pressure values plus the pulse rate will display on the Blood Pressure monitor.
5. The readings will automatically be transferred to the RCP SmartHub and sent to your
provider.
Need Help? Contact Support at 855-477-7000.
Do not disassemble the unit.
/