Rogers 410745 Assembly Instructions

Rogers
Brand
Rogers
Model
410745
Type
Assembly Instructions

This manual is also suitable for

0
Table of Contents
§ Introduction…………………………………………………………………………………………………...…
§ General Safety Rules………………………………………………………………………………………….
§ Symbols…………………………………………………………...…………………………………………….
§ Technical Specifications……………………………………………………………………………………....
§ User Instructions……………………………………………………………………………………...………..
§ Maintenance…………………………………………………………………………..………………...………
§ Customer Service Information…………………………………………………….………………………….
Introduction
The Rogers Athletic Pit Shark has been designed and manufactured with safety, performance and
dependability as top priorities, making it easy to operate and maintain.
The care you give your Pit Shark will greatly determine your satisfaction with its performance and
service life. Careful study of this manual is encouraged to obtain a thorough understanding of your
new Monster Lat Machine and its functions.
If your manual is lost or destroyed, Rogers Athletic will gladly provide you with a new copy.
Should you require additional information or assistance, please feel free to contact us at 800-457-
5337.
1
2
3
4
5
8
8
BECAUSE ROGERS ATHLETICS MAINTAINS AN ONGOING PROGRAM OF
PRODUCT DEVELOPMENT AND IMPROVEMENT, WE RESERVE THE
RIGHT TO MAKE IMPROVEMENTS IN DESIGN OR CHANGES IN
SPECIFICATIONS WITHOUT INCURRING ANY OBLIGATIONS TO INSTALL
THEM ON UNITS PREVIOUSLY SOLD.
Product Information Packet
Pit Shark®
Product Number: 410745,410744
Product Part Number: 410711
Patent # 7871360 B1
(Tall Frame Pit Shark Shown
#410745)
1
Table of Contents
§ Introduction ……………………………………………………………………………….1
§ General Safety Rules…………………………………………………………………….2
§ Symbols……………………………………………………………………………………4
§ Equipment Specifications……………………………………………………….............5
§ Assembly Instructions…………………………………………………………………….7
§ User Instructions……………………………………………………………...................11
§ Maintenance…………………………………………………………………………….....14
§ Customer Service………………………………………………………………………....15
Introduction
The Pit Shark ® belt squat has been designed and manufactured with safety, performance and dependability as
top priorities, making it easy to operate and maintain.
The care you give your Pit Shark ® belt squat will greatly determine your satisfaction with its performance and
service life. Careful study of this manual is encouraged to obtain a thorough understanding of your new Pit
Shark ® belt squat and its functions.
If your manual is lost or destroyed, Rogers Athletic will gladly provide you with a new copy. Should you require
additional information or assistance, please feel free to contact us at 1-800-457-5337.
BECAUSE ROGERS ATHLETIC MAINTAINS AN ONGOING PROGRAM OF
PRODUCT DEVELOPMENT AND IMPROVEMENT, WE RESERVE THE RIGHT
TO MAKE IMPROVEMENTS IN DESIGN OR CHANGES IN SPECIFICATIONS
WITHOUT INCURRING ANY OBLIGATIONS TO INSTALL THEM ON UNITS
PREVIOUSLY SOLD.
2
General Safety Rules
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below may result in serious personal
injury.
SAVE THESE INSTRUCTIONS
• Supervision of athletes while using the equipment is recommended. Horse play such as climbing
on the machine or using the machine for unintended purpose can result in injuries.
• Athletes should be oriented in the proper use of the equipment.
• Athletes should be properly fit to engage in a workout regimen. Obtaining a medical exam prior to
beginning any exercise program is recommended. If an athlete feels faint, dizzy, or experiences pain at
any time while exercising, they should stop exercising and consult a physician.
• Athletes should wear close fitting clothing to keep the clothing free from and clear of all moving
parts.
• Inspect equipment prior to use. DO NOT use if it appears damaged or inoperable.
• This Product Information Packet is an integral part of this machine. Save these instructions. If
they are lost or damaged or if you would like another copy, a copy can be downloaded from
www.RogersAthletic.com
• Reading the Product Information Packet is recommended. Failure to read this Packet is
considered a misuse of this equipment.
• Warning labels are an integral part of this machine. Become familiar with all caution/warning labels
and never cover or deface caution/warning labels.
• Install the equipment allowing sufficient room for safe access to the machine, adequate room
for the spotters to stand and to ensure that the machine does not collide with a wall or another
machine through the entire range of motion.
• Use of a spotter is recommended. Spotters should stand behind the athlete using the machine or to
either side of the athlete. When using Pit Shark ® spotter should not attempt to reach into the main part
of the rack system.
• Stay clear of all pinch points. Instruct all athletes to keep fingers away from the weight arm and away
from moving parts that may present danger of pinching.
• Unit is designed for performing exercises with proper technique using only authorized Rogers
Athletic components. Do not use weight equipment for anything other than its approved purpose.
• Equipment is designed for use by one person at a time. Keeping other athletes and spectators
away from the machines during use is recommended.
3
• A clean workout environment is recommended to avoid trip hazards.
• Questions or comments? Please contact Rogers Athletic by phone (1-800-457-5337), or visit our
website at www.RogersAthletic.com
4
Symbols
Rogers Athletic Weight Equipment
Specifications
Pit Shark 410745,410744
Read the Operator’s Manual: To reduce risk of injury,
user must read and understand operator’s manual before
using this product.
Safety Alert: Precautions that involve your safety.
Weight: 515lbs/490lbs
Height: 94”/60”
Length: 71”
Width: 67”
- Includes Belt, Pull-up Handles, Dip
Handles, and Squat Handles
Stay Clear Warning Label: Stay clear of weight
equipment when it’s in use. Only spotters should be in
close proximity when the equipment is being used by
someone else.
5
szz
Length
Height
Width
Length
Height
Width
(410745)
(410744)
6
Rogers Athletic Weight Equipment
Specifications
Pit Shark Push up Handles 410810,410811
Assembly Instructions
Assembly will require two people
1
Weight: 15lbs/12lbs
Length: 25”
Height: 10.5”
Width: 10.25”
Diameter: 2”/1.5”
- Available in both 2” and 1.5”
diameter
- Knurled, non-slip surfacing
- Durable Clear coat or painted finish
Length
Height
Width
Cross
Brace
7
2
Connect the (3) cross braces to the upright using (2) ½” bolts and (2) ½” nuts each. Then connect
the other side of the upright to the (3) cross braces using (2) ½” bolts and (2) ½”nuts. Do Not
Completely Tighten Bolts Until Both Uprights are attached to Cross Braces.
Hook
Arm
Pin, insert
into upright
8
After both sides of the frame have been attached, install the (2) spotter arms into the upright. Install the
spotter arms by lifting them at a 90 degree angle to the upright rail, insert the pin into the desired position
on the upright and then let the arm bracket rest against the frame rail. The spotter arms should be
installed at equal height.
3
4
Install the connection tube between the hook arms using (1) ½” bolt into each end of the connection tube.
Connection
tube
3
9
This Step requires two people!
4
This Step Requires Two People!
5
With a helper, install the load platform and pillow bearings using (2) ½” bolts and (2) ½”” nuts per
side. The load platform should be installed such that it rests on the Pit Shark ® hook. Use caution
and keep hands and feet clear of pinch points.
With a helper, center the deck on the Pit Shark ® machine, making sure that all (4) bolt holes line up.
Install the non-slip deck using (4) 3/8” carriage bolts and (4) 3/8” nuts.
Pillow block
This end rests
in hook
10
User Instructions
This Step Requires Two People!
6
1
Install the upper weight horns using (2) ½” bolts and (2) ½” nuts each, completely tighten the bolts to
the uprights. With a helper, install the lower weight horns and the accessory rack using (2) ½” bolts
and (2) ½” nuts per side. Completely tighten the bolts to the uprights.
Resistance can be added or removed by adjusting the belt connection location on
the “fin”. Connecting the belt further away from the machine will decrease the load
on the user. Caution! When adjusting make sure to keep hands and feet away
from fin.
Upper Weight
Horns
Lower weight
Horns
Accessory
Rack
Heavier
Lighter
Fin
11
2
To lock the Pit Shark arm up, lift up on the arm and pull back on the handle. This will position the
hooks under the weight horn and prevent the machine from going down. To release the hook, simply
lift up or begin your workout and the hook will fall back to its original position.
12
Maintenance
WARNING!
READ AND UNDERSTAND ALL MAINTENANCE PROCEDURES.
Failure to follow all procedures listed below may cause serious injury and/or
decrease equipment functionality.
§ Frequently check to see that all bolts are securely fastened.
§ Frequently check to see that weight equipment is functioning properly.
§ Touch up paint may be used to cover scratches or blemishes sustained through use.
3
To create tension on arms place pin in hole and attach band to pin and weight horn To adjust tension
on arms move pin farther away from weight horn to make tension greater, if more tension is desired
place second pin in first or second hole and place other pin in 3th or 4th hole and place band over 1st
pin and go under 2nd and over the weight horn adjust to desired tension. For less tension move pin
closer to weight horn
1
Band Pin Holes
Higher Tension
Attach Band to inner
side of Weight horn
13
§ A silicone based lubricant may be used on moving parts to maintain proper function.
§ Mild detergent or disinfectant may be used to clean weight equipment.
§ Replace any damaged equipment with genuine Rogers Athletic parts. Failure to do so may result
in unsafe equipment and/or personal injury.
Customer Service
For parts or service contact Rogers Athletic Company. When ordering parts be sure to provide all relevant
information available including the name and part number of the equipment purchased. This information is
located on the cover of this product information package. Customer service hours are Monday through Friday
from 8:00 a.m. to 5:00 p.m. Eastern Standard Time. Customers can phone (989) 386-2950 or toll free at (800)
457-5337. Fax toll free at (888) 549-9659 or mail to:
Rogers Athletic Company
3760 W. Ludington Drive
Farwell, MI 48622
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Rogers 410745 Assembly Instructions

Rogers
Brand
Rogers
Model
410745
Type
Assembly Instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents