LG SN10Y Wi-Fi Sound Bar: Experience immersive audio with 570W of total power output. Connect to your TV via optical or HDMI (eARC/ARC) and enjoy crystal-clear sound. Stream music wirelessly via Wi-Fi and control the soundbar with the Google Home app. Enhance your movie nights with thrilling surround sound created by adding the SPK8-S Rear Speakers Kit (sold separately).
LG SN10Y Wi-Fi Sound Bar: Experience immersive audio with 570W of total power output. Connect to your TV via optical or HDMI (eARC/ARC) and enjoy crystal-clear sound. Stream music wirelessly via Wi-Fi and control the soundbar with the Google Home app. Enhance your movie nights with thrilling surround sound created by adding the SPK8-S Rear Speakers Kit (sold separately).
SIMPLE MANUAL
Please read this manual carefully before operating your set and retain it for
future reference.
To view the instructions of advanced features, visit http://www.lg.com and
then download Owner’s Manual. Some of the content in this manual may differ
from your unit.
MODEL
SN10Y
www.lg.com
Copyright © 2020-2023 LG Electronics Inc. All Rights Reserved.
LG Wi-Fi
Sound Bar
ENGLISH DEUTSCH MAGYAR ČESKY SLOVENČINA POLSKI
2104_Rev03
MFL72000205
SN10Y.DPOLLLK_SIMPLE_ENG_MFL72000205.indd 1 2022-12-13 12:56:06
Front Panel
1 (Standby) ············Switches the unit ON or OFF.
F (Function) ··························Selects function.
p/o (Volume)······················ Adjusts volume.
/ (Wi-Fi) ····················Selects Wi-Fi function.
Reset the Unit
Press and hold the / on the unit until you
hear the beep sound once.
Rear Panel
USB port ····················Connect to a USB device.
OPTICAL IN·············Connect to an optical device.
HDMI OUT (TV eARC/ARC) ······· Connect to a TV.
HDMI IN (1) / HDMI IN (2) ····················
Connect to device with HDMI OUT.
Make sure to properly align and connect
the optical cable; improper alignment may
cause damage to the jack.
Subwoofer Connection
Place the wireless subwoofer near the sound bar and
follow steps below.
a Connect the power cord of the sound bar and the
wireless subwoofer to the outlet.
b Turn on the sound bar.
• The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
green LED turns on.
Manually Subwoofer Connection
If the subwoofer does not make sound, try to
connect manually.
a Press Pairing on the rear of the wireless
subwoofer.
• The green LED on the rear of the wireless
subwoofer blinks quickly.
(If the green LED does not blink, press and
hold the Pairing.)
b Turn on the sound bar.
• Pairing is completed. The green LED on the
rear of the wireless subwoofer turns on.
Keep the sound bar and the subwoofer
away from the device (ex. wireless router,
microwave oven, etc.) over 1 m to prevent
wireless interference.
!1 m
SN10Y.DPOLLLK_SIMPLE_ENG_MFL72000205.indd 2 2022-12-13 12:56:07
TV Connection
Connect the sound bar and TV using Optical ( ) or
HDMI ARC ( ).
Optical Connection
a Connect the sound bar to the TV using Optical
cable.
b Set up [External Speaker (Optical)] on your TV
setting menu.
HDMI (TV eARC/ARC) Connection
a Connect the sound bar to the TV using HDMI
cable.
b Set up [External Speaker (HDMI ARC)] on your
TV setting menu.
• HDMI connection is unavailable if your TV
does not support HDMI ARC.
• If this unit is connected by OPTICAL and
ARC at the same time, the ARC signal has
a higher priority.
Additional Device Connection
a Connect to the external device like as follow.
(Set-top Box,
Player etc.)
OR
b Set the input source by pressing F repeatedly.
Network Connection
a
b
c
a Check network condition. A router connected to
network should be installed.
b Connect your smart device to your home
network.
c Connect the sound bar to the power supply.
All devices should be connected to same
router.
Step.1 Install “Google Home” App
Download the Google Home App from the Google
Play or App Store.
Step.2 Set up the Wi-Fi connection with
app
a Connect your smart device to the Wi-Fi network
that you’ll use for your unit.
In case of iOS devices, it should be turned
on Bluetooth setting on your smart device.
b Launch the “Google Home” app.
c Follow the steps for Wi-Fi connection on the app.
• When the unit is properly connected to Wi-Fi,
“CONNECTED” will appear on the display
window with sound.
• When connect to Wi-Fi, this app may
request to create a Google Account. You
will need a Google account to use this app.
• “Google Home” app is provided by Google.
It might be revised by a change of Google
Policy.
SN10Y.DPOLLLK_SIMPLE_ENG_MFL72000205.indd 3 2022-12-13 12:56:08
Remote control
Replacement of Battery
SOUND EFFECT: Selects a sound effect mode.
- TV remote: Long press SOUND EFFECT and
press it again to use TV remote control.
FOLDER W/S: Searches a folder.
J:Displaystheinformationofale,aninput
source, a connected Bluetooth device name or an
application name.
- Auto Power ON/OFF: Long press J and press
it again.
: Adjusts sound level of each speaker.
- Surround sound: Long press and press it
again.
REPEAT:Listenstoyourlesrepeatedlyorrandomly.
Additional
Download LG Sound Bar Application
You can manage the speaker settings and control the
speaker by using “LG Sound Bar”.
Download “LG Sound Bar” on the App Store or
Google Play Store.
AI Room calibration
AI Room Calibration is a sound tuning tool, which
adjusts the audio settings of the Sound Bar based on
the room acoustics and environment.
To access the AI Room Calibration it is necessary to
install the “LG Sound Bar” app. On [Sound Setting]
menu, choose [AI Room Calibration].
Additional Information
Specication
Power
requirements Refer to the main label.
Power
consumption
Refer to the main label.
Networked standby : 6.5 W
(If all network ports are
activated.)
Dimensions
(W x H x D)
Approx.
1443.0 mm x 63.0 mm x
146.0 mm (with foot)
Bus Power
Supply (USB) 5 V 0 500 mA
Amplier
(Total RMS
Output
power)
570 W RMS
Designandspecicationsaresubjecttochange
without notice.
Rear Speakers Ready
Ready for surround sound with Rear
Speakers Kit sold separately. (SPK8-S)
To enjoy content containing Dolby Atmos® and
DTS:X®, the connected device and content must
support Dolby Atmos® and DTS:X®.
How to disconnect the wireless network
connection or the wireless device
Turn off the unit by pressing the power button for
more than 3 seconds.
SN10Y.DPOLLLK_SIMPLE_ENG_MFL72000205.indd 4 2022-12-13 12:56:08
-
1
-
2
-
3
-
4
LG SN10Y Wi-Fi Sound Bar: Experience immersive audio with 570W of total power output. Connect to your TV via optical or HDMI (eARC/ARC) and enjoy crystal-clear sound. Stream music wirelessly via Wi-Fi and control the soundbar with the Google Home app. Enhance your movie nights with thrilling surround sound created by adding the SPK8-S Rear Speakers Kit (sold separately).
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI