Butt Splice Connector:
Using crimper or pliers and
pressing the header of
connector down to even position.
PPB-110
To swap out your lens cover to the other
included lens covers, carefully pull on the
clear cover only to remove it from the front
of the switch.
Pick which cover you want, place it inside
and return the cover to its position, and
push it in until you hear it snap into place.
2 3/4”
4
83.5
69
70.5
114
4 1/2”
3 5/16”
3/16”
2 3/4”
PPB-110 Series REX Button Instructions
Copyright © All Rights Reserved. P-MU-PPB-11 Published: 2016.12.14
5 per pack
Red Bulb / + Positive (12 VDC)
Black Bulb / - Negative (0V)
Yellow Switch / NC - Normally Closed
White Switch / NO - Normally Open
Green Switch / C - Common
Butt Splice Connector:
Using crimper or pliers and
pressing the header of
connector down to even position.
PPB-110
To swap out your lens cover to the other
included lens covers, carefully pull on the
clear cover only to remove it from the front
of the switch.
Pick which cover you want, place it inside
and return the cover to its position, and
push it in until you hear it snap into place.
2 3/4”
4
83.5
69
70.5
114
4 1/2”
3 5/16”
3/16”
2 3/4”
PPB-110 Series REX Button Instructions
Copyright © All Rights Reserved. P-MU-PPB-11 Published: 2016.12.14
5 per pack
Red Bulb / + Positive (12 VDC)
Black Bulb / - Negative (0V)
Yellow Switch / NC - Normally Closed
White Switch / NO - Normally Open
Green Switch / C - Common
-
1
Gianni Industries PPB-106 Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Vaisala AQT400 User manual
-
ProMinent Beta BT4a Operating Instructions Manual
-
Ion Science MiniPID 2 User manual
-
-
GE 26 User manual
-
ABB Navigator 500 Series Operating Instructions Manual
-
Teledyne M201E User manual
-
Mettler Toledo 5000TOCe Sensor5000TOCe Sensor Operating instructions
-
-
Teledyne VCR T703U User manual
