DKS 900 MHz Antenna Kit User manual

900 MHz ANTENNA KIT

Installation

DoorKing Part Number

1514-079

1514-179-A-4-19

Nylon

Washer

Nylon

Washer

Metal

Mounting

Bracket

13 ft Coax Cable

(Supplied)

DoorKing's 900 MHz antenna kit is designed as an externally mounted antenna for the 900 MHz wireless tracker expansion board

system ONLY. Mount the antenna as high as possible away from other metal or metal containing walls. Range CAN VARY GREATLY

depending on: Antenna height above the ground, background signal interference, physical obstructions (trees, buildings etc.).

Adverse weather (rain) CAN also affect antenna range. The antenna MUST be mounted using the 2 nylon washers to isolate the

antenna from the metal mounting bracket or signal range will be significantly reduced.

Note: DoorKing offers an optional 13 ft extension

cable (P/N 8064-046) sold separately. This can be

added if more than 13 ft of supplied cable is needed.

Use appropriate hardware to

mount bracket not supplied.

120 S. Glasgow Avenue

Inglewood, California 90301

U.S.A.

1. Mount the antenna as high as possible away from other metal or metal containing walls.

2. IMPORTANT Isolate the antenna from the metal mounting bracket using the 2 nylon washers.

3. Connect the other end of the coax cable to the 900 MHz tracker expansion board system.