Burning Instructions
FIREPLACES* OR OUTDOORS WOODSTOVES*
1. Fully open fireplace damper. 1. Tear open seam, loosen wrapper
2. Tear open seam, loosen wrapper. 2. Place one firelog on grate. (See FIGURE 1)
3. Place one or two firelogs on grate. (See FIGURE 1) 3. Seam up; light ends of wrapper. See FIGURE 2)
4. Seam up; light ends of wrapper. (See FIGURE 2) 4. Check & Manager your fire regularly.
5. Always use a fireplace screen.
6. Check & manage your fire regularly.
* It is recommended that Enviro-Logs be added, as needed, one at a time to an existing fire.
Check and manage fireplace and woodstove fire regularly.
Caution – Risk of fire
The Enviro-Log Firelog is designed to light easily and quickly with a match or butane utility lighter.
DO NOT use flammable liquids or fireplace gas log lighters to ignite the firelog.
/
