Eurofase 12526-017 Installation guide

Type
Installation guide

Eurofase 12526-017 is a lighting fixture designed to provide many years of enjoyment. It is easy to install and can be used in a variety of applications. The fixture comes with all the necessary hardware, including screws, wire nuts, and marettes. It also includes a decorative cap to secure the back plate or canopy to the crossbar. The fixture can be mounted on a wall or ceiling and is compatible with A19 bulbs up to 60 watts. It is also dimmable, so you can adjust the light output to create the perfect ambiance for your space.

Eurofase 12526-017 is a lighting fixture designed to provide many years of enjoyment. It is easy to install and can be used in a variety of applications. The fixture comes with all the necessary hardware, including screws, wire nuts, and marettes. It also includes a decorative cap to secure the back plate or canopy to the crossbar. The fixture can be mounted on a wall or ceiling and is compatible with A19 bulbs up to 60 watts. It is also dimmable, so you can adjust the light output to create the perfect ambiance for your space.

THANK Y O U
You’ve just
purchased a
lighting product
designed and built
to provide you
with many years of
enjoyment.
MERCI
Vous venez
d’acheter un
luminaire conçu pour
vous donner
des années de plaisir.
GRACIAS
Usted acaba de
adquirir un excelente
producto de alumbrado
disenado y construido
para proveerle muchos
años de satisfaccion.
12526
INSTRUCTIONS
Please read all instructions prior to installation.
Installation of this fixture must comply with local building codes.
Installation of this fixture must be done by a qualified electrician.
Veuillez lire toutes les instructions avant l’installation.
L’installation de ce luminaire doit être faite selon le code local de
construction.
L’installation de ce luminaire doit être faite par un électricien
qualifié.
Favor de leer toda las instrucciones antes de comenzar la instalacion.
La instalacion de esta luminaria (este producto) debera de cumplir con los
codigos locales de construccion.
La instalacion de esta luminaria (este producto) debera ser realizada por un
electricista calificado.
Tools Required • Outils Nécessaires • Herramientas Requeridas
INSTALLATION & CONNECTIONS
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
NOTE: Use a qualified electrician for installation of this fixture.
INSTALLATION INSTRUCTIONS
1. Turn off power at main fuse box.
2. Mount crossbar complete with threaded nipple (A) to junction box
with 2 screws supplied.
3. Fasten open end of ground wire (bare copper or green wire), to ground
wire or ground screw of junction box or ground screw on crossbar.
4. Connect black wire of power supply to black wire of sconce and white
wire of power supply to white wire of sconce. NOTE: All wire
connections should be made with wire nuts or marettes (included) and
pushed back into junction box.
5. Mount back plate or canopy of fixture (B) over the nipple of crossbar
(A). Secure with decorative cap (C).
SHADE AND BULB INSTALLATION
1. Align all the screws (D) on backplate (B) with the holes on shade (E)
and secure shade by fastening together using threaded caps (F).
2. Install 60W max. A19 bulbs (not included).
TURN ON POWER
ENJOY YOUR
EUROFASE
™ LIGHTING PRODUCT
www.eurofase.com
  • Page 1 1
  • Page 2 2

Eurofase 12526-017 Installation guide

Type
Installation guide

Eurofase 12526-017 is a lighting fixture designed to provide many years of enjoyment. It is easy to install and can be used in a variety of applications. The fixture comes with all the necessary hardware, including screws, wire nuts, and marettes. It also includes a decorative cap to secure the back plate or canopy to the crossbar. The fixture can be mounted on a wall or ceiling and is compatible with A19 bulbs up to 60 watts. It is also dimmable, so you can adjust the light output to create the perfect ambiance for your space.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI