idh by St. Simons 21300-014 Installation guide

by St. Simons, Inc.

Quality Solid Brass Decorative Hardware & Bath Accessories

“The Special Finishes Specialist”



idhbrass.com

Installation Instructions

Premium Grade Solid Brass

Octagonal Crystal Knob with Solid Brass Shank

Item# 21300

Dimensions:

- Spindle Diameter: 0.35 in.

- Spindle Length: 3-1/2 in.

- Knob Diameter: 2-1/4 in.

- Shank to front edge: 3-3/8 in.

- Shank diameter: 1-1/2 in.

- Fits doors: 1-3/8 – 1-3/4 in.

Dimensions are for reference use only.

For exact dimensions, please measure actual part.

Installation Instructions:

1. Using the provided hex (allen) wrench, loosen screws on

one doorknob. Remove by twisting it off the spindle.

2. Place back plate or rosette (sold separately) on one side

of the door and insert the rod through the back plate and

mortise latch (sold separately) and out the other side of

the door.

3. Place back plate or rosette on other side, and re-attach

doorknob by twisting it onto the spindle. Replace the

screws and tighten until secure.

4. Screw the back plate onto each side of the door.

Catalog Section: M

Octagonal Crystal Knob with Solid Brass Shank

Item# 21300

Date: Rev 05/18

2 3/8”

3 1/2”

2 1/4”