15
"
(38.1)
34
"
APPROX.
(86.36)
(Metric cm)
3
/
4
"
LEVEL
ADJUSTMENT
(1.91)
(21.59)
24
"
(60.96)
20
"
(50.8)
40
"
(101.6)
8
1
/
2
"
Top ViewSide View
Recessed 9" wide x 3"
deep x 4" tall utility shelf
E.L. Mustee & Sons, Inc. • 5431 West 164th Street • Brook Park, OH 44142 • Phone: 216.267.3100 • Fax: 216.267.9997
E-mail: info@mustee.com. • Web: www.mustee.com • Proudly made in the USA
Notice: Our continuous commitment to product improvement may result in changes to product specifications without notice.
Patents pending. Made and Printed in U.S.A.
28F BIG TUB
™
UTILATUB
®
Utility Tub
One-piece molded tub of impact-resistant
polypropylene
Heavy gauge steel legs, with adjustable levelers
Large, self-draining back shelf directs water run-off
into the tub
Mold and mildew-resistant components
Easy to assemble and install
Color-fast, stain-resistant white finish
Drain stopper
General: Furnish and install as shown on plans, BIGTUB™ UTILATUB® Utility Tub Model 28F, as manufactured by E.L. Mustee & Sons, Inc. Tub shall
be one-piece molded polypropylene with matched metal molds and includes: Steel legs with adjustable levelers; and 1½” Molded-in drain and Drain
stopper. 36-Gallon capacity. Shall meet ANSI Z 124-2011 Color: White. Weight: 23 lbs.
Colors & Models: Model Mounting Outside H x W x D Inside H x W x D UPC
White 28F Floor 34” x 40” x 24” 12-1/2” x 36-1/2” x 17-1/2” 6 71031 00499 4
Specifications
Code Accepted
BIGTUB™ UTILATUB® meets or exceeds applicable performance requirements as listed:
International Association of Plumbing and Mechanical Officials (IAPMO)® Listed US/CANADA
American National Standards Institute (ANSI)- Specification Z 124-2011
SEE PAGE 2 FOR A LIST OF ACCESSORIES!
Faucet
HandiFlo
™
Fitting
Faucet Block
Model No. UPC
93.600 6 71031 00232 7
Model No. UPC
94.700 6 71031 00287 7
Model No. UPC
20.600 6 71031 00031 6
Chrome nish, 4” center set brass faucet. 7” swing spout with aerator, level handles, replaceable seats
and stems. Areator or hose end.
Dispenses water from washing machine discharge hose into laundry tub. Eliminates draping washer
machine hose over back/side wall of laundry tub and conceals discharge hose. Mounts to back or side
wall of laundry tub, includes mounting hardware.
Used when water supply lines are above the tub. Mounts to tub shelf when using a clamp-on faucet.
E.L. Mustee & Sons, Inc. • 5431 West 164th Street • Brook Park, OH 44142 • Phone: 216.267.3100 • Fax: 216.267.9997
E-mail: info@mustee.com. • Web: www.mustee.com • Proudly made in the USA
Notice: Our continuous commitment to product improvement may result in changes to product specifications without notice.
Patents pending. Made and Printed in U.S.A.
28F BIG TUB
™
UTILATUB
®
Utility Tub Accessories
/
