2. Zebra
  3. SE965

Zebra SE965 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Zebra SE965 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Warning: Installation of any components must be performed using appropriate anti-static devices. If unavailable, dis-
charge body static by touching a grounded metallic object before opening any covers on the hand-held.
Along with the slim pod (either SE965 or SE655), each kit includes:
• M2.6x4L Torx T6 screws (x6)
Important: Always disconnect the unit from all power sources (battery & A/C power) before servicing components.
1. Remove the battery, existing end-cap (x4 screws), and back cover (x6 screws).
2. Connect the flex cable to the 1D scanner connector, and push down on the connector latch to lock the flex
cable in place.
Flex cable
1D scanner
connector
© 2015 Symbol Technologies, Inc.
Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol logo is a registered trademark of Symbol Technologies,
Inc., a Zebra Technologies company.
February 27, 2015
8000309-001 A
SE965 (WA9015) & SE655 (WA9017) SLIM POD PISTOL GRIP COMPATIBLE
INSTALLATION SHEET
3. Attach the slim pod using the 6 screws provided, torqued to 2.6 in-lbs.
4. Install the end-cap using the 4 screws provided, torqued to 2.6 in-lbs.
5. Install the battery and battery cover.
Once the slim pod is installed:
1. Press [Power] [FN/BLUE] and the top-middle [SCANNER] button simultaneously to display the Boot menu.
2. Press the [s] key to display the Scanner menu. (For numeric keyboard users, press the [FN/ORANGE] key, press
the [7] key four times, and then press the [FN/ORANGE] key again.)
3. Type the number corresponding with the slim pod you have installed – for example, type 67 to configure the
SE655 scanner.
4. Next, perform a clean boot – at the Command> prompt, type .clean (For numeric keyboard users, type .25326).
Note: Clean booting the device removes the add-on CAB file for Windows Embedded Handheld. It needs to be re-installed.
To re-install the add-on CAB file:
1. Download the add-on CAB file from Ingenuity Working to your Workabout Pro4.
2. Double-click the add-on CAB filename to install the CAB file.
The Workabout Pro4 restarts automatically to complete the installation.
Slim pod
COMPANY HEADQUARTERS SUPPORT SERVICES
Zebra Technologies Corporation Contact the Zebra Global Customer Support at:
Lincolnshire, IL U.S.A. http://www.zebra.com/support.
http://www.zebra.com
/