Dyconn WTM02803-NM Operating instructions

Begin bathtub installation

on a mat to protect

the tub’s surface.

Use appropriate silicone to ensure proper adherence

according to surface type.

Do not use for 24

hours after

installation

4. 5. 6.

2. 3.

1. Use a level to ensure that tub legs are even with the base

of the tub. Twist tub legs as needed to adjust height.

4. Using a pencil, trace around the bath to ensure correct

placement.

This installation guide is for experienced professionals and does not outline detailed

waste connection installation. Installation should be done by a professional.

5. Generously apply silicone within the drawn tub outline. 6. With the aid of another individual, set bath on top of outline

and allow the silicone to set according to setting time as per

the silicone’s packaging.

3. Enlist the help of a professional to install waste connections.

SILICONE

ACRYLIC BATHTUB INSTALLATION

SEE DRAIN DETAIL

INTEGRAL OVERFLOW

CHANNEL