Generation Lighting ET1101WDO1 Installation guide

Brand
Generation Lighting
Model
ET1101WDO1
Type
Installation guide

This manual is also suitable for

1
Installation Instructions for
Ferrelli 1 Light Floor Lamp
1.0
ET1101
Portable
ET1101
GP I :ENERAL RODUCT NFORMATION
This product is safety listed for dry locations only.
This instruction shows a typical installation.
1
2
1A
Screw the stem onto the base.
Screw the socket assembly onto the stem.
Install the harp by inserting it into the yoke.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Install the shade by placing the shade over the harp nipple and screwing the finial onto the nipple to secure it in place.
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider
than the other) as a safety feature to reduce the risk of
electric shock.This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit contact a qualified electrician.
Never use with an extension cord unless plug can be fully
inserted. Do not attempt to defeat this safety feature.
3
HARP
3
SHADE
STEM
BASE
1
2
4
5
LAMP
YOKE
SOCKET ASSEMBLY
5
FINIAL
HARP NIPPLE
4
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 160077IL
800.969.3347
www.generationlighting.com
© 2019 Generation Lighting.All rights reserved.
The "Generation Lighting" graphic is a registered trademark of
Generation Lighting. Generation Lighting reserves the right to
change specifications for product improvements without notification.
  • Page 1 1
  • Page 2 2

Generation Lighting ET1101WDO1 Installation guide

Brand
Generation Lighting
Model
ET1101WDO1
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents