PARTS INCLUDED:
Item# 7678 - How To Assemble Your Counter High Table
TOOLS NEEDED: Philips screwdriver, power drill optional
CAUTION: When assembling table, DO NOT completely tighten the bolts and nuts until all the parts &
holes are properly aligned.
(REV. 03/2017)
1 PC Table Top
A
A
2 PC Legs
B1
2 PC Legs
B2
B1
B2
Step 2:
Attach Table Top with 2 Long Machine
Threads (6 x 55 m/m), 2 Nuts and 2 Iron
Washer for each side. Make sure to place
the Nuts & Iron Washer on the inside
of legs.
.
4 PC Long Machine Thread
(6 x 55 m/m)
4 PC
Iron Washer
Step 1:
4 PC
Nuts
Spanner
(4 x 4 m/m)
12 PC Short Machine Thread
(6 x 40 m/m)
Connect & Legs together
with six Short Machine Threads
(6 x 40 m/m) for each side -
3pcs for each corner.
B1
B1
B1
B2
B2
B2
6 PC
Short Machine
Thread
(6 x 40 m/m)
6 PC
Short Machine
Thread
(6 x 40 m/m)
2 PC
Long Machine
Thread
(6 x 55 m/m),
2 Nuts & 2 Iron
Washer
A
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Weider VECTOR 7 BENCH 2172 User manual
-
Woodstock W1728 Owner's manual
-
Grizzly Industrial G0528 Owner's manual
-
-
Grizzly W1720 Owner's manual
-
-
Body-Solid F400 Owner's manual
-
-
-
JET Router Lift Owner's manual
