Glow Lighting 598FM1LSP-7C Operating instructions

Brand
Glow Lighting
Model
598FM1LSP-7C
Type
Operating instructions
Crystal trimming instruction
for: #598FM1L
®
Glow Lighting Inc.
CUSTOMER COPY
22.10.15
Your crystal fixture is packed to include extra pins and crystal pieces for future use.
These extra parts may come in handy if a piece or two is chipped or misplaced while
the fixture is being untrimmed. As they may be useful in some future days, please
store them safely.
Cleaning Instructions
Your fixture requires regular cleaning and, depending on the volume of traffic where
your fixture is displayed, the frequency may vary. We recommend the following steps
for cleaning. Caution: When Trimming or Un-trimming your fixture, never attempt to
rotate or counter rotate your fixture as it may result in the risk of fire, electric shock,
personal injury and property damage. Caution: If the fixture is displayed beyond
reach, you are advised to have a professional cleaner to perform the cleaning as it
may result in the risk of fire, electric shock, personal injury and property damage.
1. Retrieve the copy of Trimming Instructions, packed with the fixture when it was
purchased.
2. Study and Identify all the crystal strands from the trimming instructions and the
fixture. Please note how the fixture was trimmed originally, the strand “A” was
trimmed first. However, when un-trimming the fixture, the order is backwards.
With care, remove, starting from the higher alphabetic number first, all the
identical strands of crystal, place them aside, and make a note to label these
strands of crystal according to the trimming instruction.
3. Continue to un-trim as 2 above until you reach the last strand labeled “A”.
4. With a lint-free cloth and some lukewarm water solution, mixed at a ratio of 100
parts water to 1 parts of white vinegar, wipe each of the crystal strands clean
until satisfactory.
5. Ensure the power to the fixture is turned off and the light bulbs are cooled down,
use a lint-free cloth and ring out dry with some lukewarm water, mixed as 4
above, wipe the fixture clean until satisfactory. Caution: ensure no water is
dripped into any electrical components as it may result in the risk of fire, electric
shock, personal injury and property damage.
6. Re-trim your fixture, starting from the strand “A”, until the last strand is complete.
CARE PACKAGE
Top View of the plate
-Inside layer(Row)
-Outer layer(Row)
-Middle layer(Row)
***Do Not Use This Row
-Holes trim with crystal strand
-Holes with not crystal strand
Pin the enclosed Crystal strands Randomly
to a style that is pleasing to you. This is
no set pattern for this fixture.
But DO Not Use Middle Layer(Row)
Crystal package contain:
Set ‘A1’=3, ‘A2’=3 strands.
(A1 & A2 Longest & 1 strand
extra is included for future use)
Set ‘B1’=5, ‘B2’=5 strands.
Set ‘C1’=4, ‘C2’=4 strands.
Set ‘D1’=4, ‘D2’=4 strands.
Set ‘E1’=4, ‘E2’=4 strands.
Set ‘F1’=4, ‘F2’=4 strands.
Set ‘G1’=4, ‘G2’=4 strands.
(G1 & G2 are shortest strands)
Total ‘1’s=29, & ‘2’s=29 strands.
Pins
=
A
B
C
D
-Outer layer(Row)
alternate trim ‘--1’ & ‘--2’
-Inside layer
(Row)
alternate
trim ‘--1’
& ‘--2’
-Middle layer(Row)
Do Not Use this Row
Alternate trim & on every holes
‘A1’ & ‘A2’
‘...1’ & ‘..2’
Side
View
of the
plate
Middle Layer(Row)
‘A1’ & ‘A2’
‘...1’ & ‘..2’
‘...1’ & ‘..2’
Alternate trim on every holes
# of
Set
=32pcs
(4pc extra included)
#510
Item/
Des
# of
Set
*1pc extra included
Item/
Des
29pc
Canopy
Existing & Required
Outlet Box
Finished Ceiling Line
Fixture Ground Wire
(Yellow/Green marking)
Fixture Wire
Black House Wire (HOT)
House Ground Wire (Green)
White House Wire (NEUTRAL)
Fixture
Wire
Adjustable
Round Plate
CAUTION RISK OF FIRE
MAX 50 WATTS,
TYPE Gu10 LAMP
O:5”
H:5/8”
O:5 5/8”
H:1/16”
Screw Ring
Round
Canopy
Round Plate
Min H:1 3/4”
®
Glow Lighting Inc.
Installation Instructions
For #598 1L SERIES
Fixture with less than 50LBS
WIRING AND INSTALLATION INSTRUCTIONS:
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED
( Manufacturer recommends a certified electrician should always be employed for the installation and wiring of the fixture )
Note to electrician:
1. All electrical connections must be in agreement with local codes, ordinances or the national electrical code. This product must be installed in accordance
with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
2. Turn off electricity at the main fuse box (or circuit breaker box) before beginning installation by switching circuit breaker off or removing fuse.
3. Do not connect this fixture to a non-grounded electrical system. (See wiring below) Warning: installing this fixture into a non-grounded electrical system could
allow metal parts of fixture to carry electrical current if any fixture wires, wire connections or splices become broken or loose. Under this condition, anyone
coming in contact with fixture is subject to electrical shock, which could cause injury of death.
4. Do Not suspend any fixture by the house wires. A fixture must always be mounted directly to an outlet box or to a cross bar which is first attached to outlet
box. Wire connections will not support the weight of a fixture. Suspending a fixture by the wires will result in the fixture falling, with the possibility of injury
and the danger of electrical shock or fire.
5. Be careful not to damage or cut the wire insulation (covering) during installation. Do not permit wires to contact any surface having a sharp edge. Doing so
may cause serious injury or death from electrical shock.
6. Do not use lamps (bulbs) having a wattage greater than the maximum value stated on the fixture. Doing so may cause the risk of fire.
7. If a dimmer control switch is used, obtain professional advice for the correct type and electrical rating required.
CAUTION: RISK OF ELECTRICAL SHOCK. Make sure the electrical supply to the chandelier is turned
off at the main fuse or circut breaker before doing any installation. Safety Information: Important! For your
protection and safety, carefully read and understand the information given on this sheet before beginning
installation. Failure to do so may lead to fire, electric shock, personal injury and property damage.
CUSTOMER COPY
12.11.15
  • Page 1 1
  • Page 2 2

Glow Lighting 598FM1LSP-7C Operating instructions

Brand
Glow Lighting
Model
598FM1LSP-7C
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents