ESAB Linde D-11 and D-12 Powder Dispensers

These dispensers are containers from which powder required in various powder processes can be delivered at a uniform, accurately controlled rate. Either clean, dry compressed air or cylinder nitrogen may be used to convey the powder from the dispensers.

The D-11 powder dispenser is designed for operating up to 40 psi (275 kPa) for general powder cutting and scarfing operations with any powder cutting or scarfing torch or with any powder cutting attachment.

The D-12 is intended primarily for powder lancing operations which may require air operating pressures up to 100 psi (690 kPa) and high powder flow rates.