R82 Vest/Belt Mounting Guide

Type
Mounting Guide

R82 Vest/Belt

Below you will find brief product information for R82 Vest/Belt. This product can be used to provide optimal safety, support, and comfort for the user. It is important to ensure that the vest is fitted correctly, with all straps tightened securely. You should be able to fit two fingers between the harness and the child’s body when the vest is correctly fitted.

The vest can be used together with a hip belt to provide the best seating position and to prevent the user from sliding down and out of the chair.

All buckles must be checked and cleaned regularly to maintain optimal safety.

R82 Vest/Belt

Below you will find brief product information for R82 Vest/Belt. This product can be used to provide optimal safety, support, and comfort for the user. It is important to ensure that the vest is fitted correctly, with all straps tightened securely. You should be able to fit two fingers between the harness and the child’s body when the vest is correctly fitted.

The vest can be used together with a hip belt to provide the best seating position and to prevent the user from sliding down and out of the chair.

All buckles must be checked and cleaned regularly to maintain optimal safety.

Rev. 003 - 05.2020
9996097601
Mounting instruction (GB)
How to mount the R82 vest
Monteringsveiledning (N)
Montering av R82 vest
Montage-instructies (NL)
Monteren van het R82 xatievest
Monteringsanvisning (SV)
Montera R82 väst
Instruction de montage (F)
Comment monter le harnais veste R82
Monteringsvejledning (DK)
Montering af R82 vest
Montageanweisungen (D)
Montage der R82 Weste
D
A
B
C
E
1.
2.
3.
1.
2.
3.
Producer
R82 A/S
Parallelvej 3
DK-8751 Gedved
Mounting instruction
How to mount the R82 vest
Use the ttings (A) and (B) on the chair to mount the vest. If no ttings
are mounted, please use the enclosed x locks and belt ttings to mount
the vest as shown on picture (C) and (D). Any doubt on mounting, please
contact a local therapist or authorized R82 personnel.
* Always mount the shoulder straps (1) a little higher than the
shoulder height of the user.
* Mount the middle straps (2) beneath the user’s arms.
* Mount the lower straps (3) at waist height.
Always tighten all straps securely to obtain optimal safety, sup-
port and comfort. The vest is fitted correctly when two fingers
can be put between the harness and the child’s body. Check
before every use.
To obtain the best seating position and to prevent the user from
sliding down and out of the chair, we recommend always to
mount a hip belt (E) together with the vest.
Never leave the user unattended. Ensure permanent supervi-
sion by an adult. Take care that all fixations and buckles are
placed and fitted correctly. Incorrect fitting may cause serious
injury. Check before every use.
All buckles must be checked and cleaned on a regular basis.
To obtain optimal safety, always keep the buckles cleaned.
Carefully read the care label on the harness to maintain and
wash the vest correctly.
The latest version of the mounting instruction is always
avai-lable online: R82.org
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

R82 Vest/Belt Mounting Guide

Type
Mounting Guide

R82 Vest/Belt

Below you will find brief product information for R82 Vest/Belt. This product can be used to provide optimal safety, support, and comfort for the user. It is important to ensure that the vest is fitted correctly, with all straps tightened securely. You should be able to fit two fingers between the harness and the child’s body when the vest is correctly fitted.

The vest can be used together with a hip belt to provide the best seating position and to prevent the user from sliding down and out of the chair.

All buckles must be checked and cleaned regularly to maintain optimal safety.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages