Vega VEGABAR 17 Product information

Type
Product information

This manual is also suitable for

The Vega VEGABAR 17 pressure transmitter is a robust and reliable instrument designed for accurate measurement of gases, vapors, and liquids across a wide range of industries. With its advanced piezoresistive or strain gauge measuring cells, it offers precise and stable pressure readings even in challenging conditions. The VEGABAR 17 is highly versatile, providing various process fittings, electrical connections, and configurable measuring ranges from -1 bar to 1000 bar.

The Vega VEGABAR 17 pressure transmitter is a robust and reliable instrument designed for accurate measurement of gases, vapors, and liquids across a wide range of industries. With its advanced piezoresistive or strain gauge measuring cells, it offers precise and stable pressure readings even in challenging conditions. The VEGABAR 17 is highly versatile, providing various process fittings, electrical connections, and configurable measuring ranges from -1 bar to 1000 bar.

Product information
Process pressure
Process pressure transmitter
VEGABAR 14
VEGABAR 17
Document ID: 37527
2
Contents
Process pressure
37527-EN-200327
Contents
1 Measuring principle ............................................................................................................................................................................................... 3
2 Type overview ......................................................................................................................................................................................................... 4
3 Instrument selection .............................................................................................................................................................................................. 5
4 Selection criteria .................................................................................................................................................................................................... 6
5 Electronics - VEGABAR 14 .................................................................................................................................................................................... 7
6 Electronics - VEGABAR 17 .................................................................................................................................................................................... 8
7 Adjustment ............................................................................................................................................................................................................. 9
8 Dimensions ...........................................................................................................................................................................................................10
Take note of safety instructions for Ex applications
Please note the Ex specic safety information which you can nd on our homepage www.vega.com/downloads under "Approvals" and which
comes with every instrument. In hazardous areas you should take note of the corresponding regulations, conformity and type approval certi-
cates of the sensors and power supply units. The sensors must only be operated on intrinsically safe circuits. The permissible electrical values
are stated in the certicate.
3
Measuring principle
Process pressure
37527-EN-200327
1 Measuring principle
Measuring principle
The pressure of the measured medium acts on the pressure measuring
cell, converting this pressure into an electronic signal. The ceramic-
capacitive CERTEC
®
as well as the metallic piezo and strain gauge
measuring cells are used.
VEGABAR 14
The sensor element is the ceramic CERTEC
®
measuring cell with rugged
ceramic diaphragm.
16 µm
1
2
3
Fig. 1: Conguration of the CERTEC
®
measuring cell in VEGABAR 14
1 Diaphragm
2 Soldered glass bond
3 Base element
VEGABAR 17
With measuring ranges up to 40 bar, a piezoresistive sensor element with
internal transmission liquid is used. With measuring ranges from 100 bar,
a strain gauge (DMS) sensor element on the rear of the stainless steel
diaphragm (dry).
1
3 4
2
Fig. 2: Conguration of the piezoresistive measuring cell in VEGABAR 17
1 Sensor element
2 Base element
3 Silicone oil lling
4 Diaphragm
Advantages
The measuring instruments cover a particularly large measuring range,
from vacuum up to very high pressures. The integrated self-monitoring
enables a high operational safety. Process pressure transmitters using
the dry, ceramic-capacitive measuring cell oer special safety. They char-
acterize by high overload resistance and long-term stability.
4
Type overview
Process pressure
37527-EN-200327
2 Type overview
VEGABAR 14 VEGABAR 17
Measuring cell CERTEC
®
Piezoresistive/DMS
Diaphragm Ceramic Metal
Media Gases, vapours and liquids Gases, vapours and liquids, also viscous products
Process tting G½, M20 x 1.5 according to EN 837, G½ A inner G¼ A, ½ NPT
inner ¼ NPT, G1½, 1½ NPT
G1 B or G½ B front ush, G½ B, G¼ B, ½ NPT or ¼ NPT ma-
nometer connection
Material
Process tting
316L 316Ti
Diaphragm material Al
2
O
3
ceramic 316Ti
Measuring cell seal FKM, EPDM -
Isolating liquid - Silicone oil, Halocarbon oil
Measuring range -1 … +72 bar/-100 … +7200 kPa
(-14.5 … +1044 psig)
-1 … +1000 bar/-100 … +100 MPa
(-14.5 … +14504 psig)
Smallest measuring range 0.1 bar/10 kPa (1.45 psig) 0.1 bar/10 kPa (1.45 psig)
Process temperature -40 … +100 °C (-40 … +212 °F) -40 … +150 °C (-40 … +302 °F)
Deviation < 0.3 % < 0.5 %
Signal output 4 … 20 mA 4 … 20 mA
Connection Plug according to ISO 4400, plug M12 x 1, cable outlet Plug according to ISO 4400, plug M12 x 1, cable outlet, termi-
nal housing
Recalibration - Zero/Span ±5 %
5
Instrument selection
Process pressure
37527-EN-200327
3 Instrument selection
Application area
VEGABAR 14
The VEGABAR 14 pressure transmitter can be used universally for
measurement of gases, vapours and liquids. The small pressure transmit-
ter oers maximum reliability. The VEGABAR 14 is an economical solu-
tion for a multitude of applications in all areas of industry.
VEGABAR 17
The VEGABAR 17 pressure transmitter can be used universally for
measurement of gases, vapours and liquids. The VEGABAR 17 is an
economical solution for a multitude of applications in all areas of industry.
Conguration and housing protection classes
4
3
2
1
Fig. 3: VEGABAR with plug connector according to ISO 4400
1 Process tting
2 Housing with electronics
3 Pressure compensation
4 Plug connector
3
1
2
Fig. 4: VEGABAR with cable outlet
1 Process tting
2 Housing with electronics
3 Cable outlet
4
3
2
1
Fig. 5: VEGABAR with plug connector according to ISO 4400
1 Process tting
2 Housing with electronics
3 Pressure compensation (beneath the knurled nut)
4 Plug connector
3
2
1
Fig. 6: VEGABAR with terminal housing
1 Process tting
2 Housing with electronics
3 Terminal housing
6
Selection criteria
Process pressure
37527-EN-200327
4 Selection criteria
VEGABAR 14 VEGABAR 17
Measuring cell Ceramic
Metallic
Front-ush version
Measuring system Dry
Oil-lled
Wear through process medium Abrasive
Aggressive
Max. process temperature +100 °C (+212 °F)
+150 °C (+302 °F)
Hygienic process ttings
Measuring ranges from 0.1 bar (10 kPa)
up to 1000 bar (100 MPa)
7
Electronics - VEGABAR 14
Process pressure
37527-EN-200327
5 Electronics - VEGABAR 14
Voltage supply
Depending on the version, the supply voltage and the current signal are
carried on the same two-wire connection cable.
The VEGA power supply units VEGATRENN 149AEx, VEGASTAB 690,
VEGADIS 371 as well as VEGAMET signal conditioning instruments are
suitable for power supply. When one of these instruments is used, a reli-
able separation of the supply circuits from the mains circuits according to
DIN VDE 0106 part 101 is ensured for the sensor.
Operating voltage
8 … 30 V DC
Connection cable
The sensors are connected with standard cable without screen. An outer
cable diameter of 5 … 9 mm ensures the seal eect of the cable entry.
If electromagnetic interference is expected which is above the test values
of EN 61326 for industrial areas, shielded cable should be used.
Cable screening and grounding
If shielded cable is necessary, the cable screen must be connected
on both ends to ground potential. If potential equalisation currents are
expected, the connection on the evaluation side must be made via a
ceramic capacitor (e.g. 1 nF, 1500 V).
Connection plug connector according to ISO 4400
1
2
3
+
-
1
Fig. 7: Wiring plan for plug connector according to ISO 4400, view to the connection
on the instrument side
1 Voltage supply and signal output
Connection direct cable outlet
4
1
2
2
3
Fig. 8: Wiring plan cable outlet
1)
1 Brown (+) power supply and signal output
2 Blue (-) power supply and signal output
3 Cable screen
4 Breather capillaries
1)
The other cables are not connected.
8
Electronics - VEGABAR 17
Process pressure
37527-EN-200327
6 Electronics - VEGABAR 17
The supply voltage and the current signal are carried on the same two-
wire connection cable.
The VEGA power supply units VEGATRENN 149AEx, VEGASTAB 690,
VEGADIS 371 as well as the VEGAMET signal conditioning instruments
are suitable for power supply. When one of these instruments is used, a
reliable separation of the supply circuit from the mains circuits according
to DIN VDE 0106 part 101 as well as the protection class are ensured.
Operating voltage
10 … 30 V DC (plug or cable outlet)
11 … 30 V DC (terminal housing)
Connection cable
The sensors are connected with standard cable without screen. An outer
cable diameter of 5 … 9 mm ensures the seal eect of the cable entry.
If electromagnetic interference is expected which is above the test values
of EN 61326 for industrial areas, shielded cable should be used.
Cable screening and grounding
If shielded cable is necessary, the cable screen must be connected
on both ends to ground potential. If potential equalisation currents are
expected, the connection on the evaluation side must be made via a
ceramic capacitor (e.g. 1 nF, 1500 V).
Connection plug connector according to ISO 4400
1
2
3
+
-
1
Fig. 9: Wiring plan, angle plug connector according to ISO 4400, top view to
VEGABAR
1 Voltage supply and signal output
Connection cable outlet
1
2
3
Fig. 10: Wiring plan cable outlet
2)
1 Brown (+) power supply and signal output
2 Green (-) power supply and signal output
3 blue = cable screen
Connection terminal housing
321
+
+
4 5
1
2
Fig. 11: Wiring plan, terminal housing
1 To voltage supply or processing system
2 Control instrument (4 … 20 mA measurement)
2)
The wires in blue, yellow, black, white are not connected.
9
Adjustment
Process pressure
37527-EN-200327
7 Adjustment
7.1 Recalibration with VEGABAR 17
VEGABAR 17 oers a Zero-/Span adjustment ±5 % via two integrated
potentiometers for recalibration.
Angled and round plug connector, cable outlet
2
1
Fig. 12: Adjustment zero and span
S Span
Z Zero
Terminal housing
1
2
Fig. 13: Adjustment zero and span
Z Zero
S Span
10
Dimensions
Process pressure
37527-EN-200327
8 Dimensions
VEGABAR 14
1
2 3
151 mm (5.95")
23 mm
(0.91")
49,5 mm
(1.95")
36 mm
(1.42")
ø 38 mm
(1.5")
½" NPT
M12 x 1
G½ A
G½ A
25 mm
(0.98")
124 mm (4.88")
20 mm
(0.79")
45 mm
(1.77")
132 mm (5.20")
10 mm
(0.39")
25 mm
(0.98")
1 Threaded version G½, manometer connection EN 837 with plug connection
ISO 4400
2 Threaded version G½, inner G¼ with direct cable outlet
3 Threaded version ½ NPT, inner ¼ NPT with plug connection M12 x 1
VEGABAR 17
1
2 3
G1 G ½
SW 41 mm
(1.61")
G1
SW 41 mm
(1.61")
SW 27 mm
(1.06")
28 mm
(1.10")
20,5 mm
(0.81")
~135 mm (5.32")
~90 mm (3.54")
ø 27mm
(1.06")
20,5 mm
(0.81")
~78 mm
(3.07")
65 mm
(2.56")
max. 90 mm
(3.54")
ø 61 mm
(2.40")
1 Threaded version G1, hygienic with angle plug connection ISO 4400
2 Threaded version G1, front-ush with plug connection M12 x 1
3 Threaded version G½, front-ush with terminal housing
The listed drawings represent only an excerpt of the available process
ttings. You can nd more drawings at www.vega.com/downloads under
"Drawings".
11
Notes
Process pressure
37527-EN-200327
VEGA Grieshaber KG
Am Hohenstein 113
77761 Schiltach
Germany
37527-EN-200327
All statements concerning scope of delivery, application, practical use and operating conditions of the sensors and processing systems correspond to the information
available at the time of printing.
Subject to change without prior notice
© VEGA Grieshaber KG, Schiltach/Germany 2020
Phone +49 7836 50-0
Fax +49 7836 50-201
www.vega.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Vega VEGABAR 17 Product information

Type
Product information
This manual is also suitable for

The Vega VEGABAR 17 pressure transmitter is a robust and reliable instrument designed for accurate measurement of gases, vapors, and liquids across a wide range of industries. With its advanced piezoresistive or strain gauge measuring cells, it offers precise and stable pressure readings even in challenging conditions. The VEGABAR 17 is highly versatile, providing various process fittings, electrical connections, and configurable measuring ranges from -1 bar to 1000 bar.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI