User Manual V3.0
Thank you for using our cell phone holder. Before using this product, please read the
manual carefully, then you can enjoy it.
Usage Precautions
Before installation, make sure there is a flat area(5.5*7.5inch) on your dashboard
【Step 1】 : Clean the dashboard with alcohol cotton and stick the mount on it when
the surface is dry.
【
Step 2
】
: Tear off the transparent film of cell phone holder base before put it on the
dash.
【
Step 3
】
: Put the cell phone mount holder on the dash and press it at least 10 seconds.
【Step 4】 : Wait for 3 hours to ensure the best adhesion before putting devices on.
NOTE:
It needs a smooth flat area(5.5 x 7.5 inches) on your dashboard for installation
Applies to the most majority of dashboards, except some curved surfaces and it Irregular
Dashboard (Sunk/Hump/Telescopic Screen)
Such as:
Audi: 2016 Audi Q7, 2013 Audi A7
Honda :2012/2011/2009 Honda Civic, 2009 Honda Accord, 2010 Honda CRV
Toyota :2008 Toyota Yaris, Toyota rav 4 2018, Toyota Corolla, 2019 Prius, 2009 Tundra,
2011 Tacoma
Jeep :2006 Jeep Wrangler, Jeep Cherokee
Ford : 2010 Ford Escape, Ford Fiesta 2016, 2013 Ford Edge
BMW i3, Scion XD, 2016 Nissan Frontier, 2016 Subaru Impreza, mini cooper, 2018 golf
GTI, 2020 Silverado etc.
Please check your Dashboard before use.
Notice：Please feel free to contact us if you have any question for the product. We will provide the best after-
/