Charbroil 03505770 Owner's manual

Brand: Charbroil

Model: 03505770

Type: Owner's manual

Fire Bowl 03505770 / 42803943 (01-13-04)

Tools needed

for assembly:

Straight or

Phillips screwdriver

Adjustable wrench

WARNING

NEVER LEAVE FIRE UNATTENDED!

Do not allow small children near flame. Hot embers can

fly out of bowl in breezy conditions. Adequate fire

extinguishing material should be readily available.

WARNING

CARBON MONOXIDE HAZARD

Burning charcoal inside can kill you. It gives off carbon

monoxide, which has no odor. NEVER burn charcoal

inside homes, vehicles or tents.

Read and follow all safety statements, warnings,

assembly instructions and use & care directions before

attempting to assemble.

CAUTIONCAUTION

Some parts may contain sharp edges – especially as

noted in manual. Wear protective gloves if necessary.

WARNING

Do not use this unit on a wood deck or on combustible

surfaces such as dry grass, leaves, mulch, etc. Do not

use this unit near heat sensitive or combustible structures

such as vinyl or wood siding.

Caldera Fire Bowl

Model • 03505770

Assembly Instructions

FOR OUTDOOR USE ONLY

STOP!

Missing a part?

No need to go back to the store!

The store where you made your purchase

does not stock parts for this item. If you

need parts, whether they are missing or

damaged, call the Customer Service toll

free Help Line.

Call us and we will gladly ship

the part you need

FREE OF CHARGE.

Call Our Help Line

Parts List - Model 03505770

Item

Description

55700419 Bottom Ring Kit

55700420 Top Ring Kit

55700400 Leg Kit

55700421 Fire Bowl Kit

55700422 Ash Catcher Kit

40010813 Outer Carton

42000005 Hardware Bag

42803943 Assembly Instructions

1-800-232-3398

Make sure legs are on the inside of ring, attach legs to lower ring

as shown using 4X from the outside and 4X on the inside. Tighten

nuts after all four legs are attached.

Repeat this step for areas 2, 3 and 4.

Making sure the legs are on the inside of ring, attach legs to

upper ring as shown using (4) 1/4 - 20 x 1/2” Carriage Bolts from

the outside and (4) 1/4 - 20 Keps Lock Nuts on the inside.

Tighten nuts after all four legs are attached.

Repeat this step for areas 2, 3 and 4.

Lower bowl onto assembled base

Completed view of Caldera Fire Bowl After

Assembly

Assembly of Ash Catcher

Using (3) 10-24 Combo Truss Head Machine Screws from inside

the bowl and (3)10-24 Keps Lock Nuts, attach ash catcher to the

bottom side of bowl. Tighten all nuts when ash catcher bracket is

attached to bowl.

Limited Warranty

The manufacturer warrants the Fire Bowl for replacement or repair of parts and/or workmanship for a period of ninety (90) days.

Paint is not warranted and will require touch-up.

These limited warranties are made exclusively to the original customer presenting proof of purchase. These warranties are limited to

non-commercial residential use only. Any returned goods must be shipped prepaid. These warranties do not cover normal wear and

tear or damages resulting from abuse or misuse. This warranty excludes incidental or consequential cost due to damages or losses

or property of any nature.

NOTICE: Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an

implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and

you may also have other legal rights which may vary from state to state.

For warranty service, CALL TOLL FREE: 1-800-232-3398.

HARDWARE

Hardware is shown actual size. You may have spare hardware after assembly is complete.

#10-24x3/8”

Combo Truss Head

Machine Screw

Qty: 3

1/4-20x1/2”

Carriage Bolt

Qty: 8

1/4-20

Keps Lock Nut

Qty: 8

#10-24

Keps Lock Nut

Qty: 3

Charbroil 03505770 Owner's manual

Charbroil 03505770 Owner's manual

Charbroil 03505770 Owner's manual

Related papers

Other documents