Contec BX-320 Owner's manual

IPC Series

BOX-PC

for BX-320 Series

User’s Manual

CONTEC CO., LTD.

BX-320 User’s manual

i

Check Your Package

Thank you for purchasing the CONTEC product.

The product consists of the items listed below.

Check, with the following list, that your package is complete. If you discover damaged or missing items,

contact your retailer.

Product Configuration List

BX-320-DCx00000

[Base Model]

BX-320-DCxxxxxx*1

[OS Pre-installed

Model]

Name

Pcs.

The main body

1

DIN rail attachment fittings set

1*2

F&eIT module mettal fittings

2

Rubber foot

4

Washer assembled screw (M3 x 7)

6

Countersunk screw (M3 x5)

3

Connector cover

1*2

CFast card removal prevention fitting

1

CFast card removal prevention fitting

(bottom face side)

1*2 1*2

Cable clamp

1

Power connector

1

Product guide (this sheet)

1

IPC Precaution List

1

Warranty Certificate

1

Serial number label

1

Royalty consent contract (OS)

-*3

1

Setup Procedure Document

-*3

1

Recovery Media

-*3

1

CFast User’s Guide

-*4

1*4

*1 Except for base model.

*2 It is attached the main body.

*3 It is not packed to the Base model.

*4 Come with Windows 10 install model only

* The User

’

s Guide of this product is offered as the PDF file in our web page. With it, since information such as a

setup of hardware, each component function and BIOS setup is indicated, please refer to it if needed.

* User’s manual or driver library for using F&eIT Series device module is not attached to this product. Downloading

them from the CONTEC Website is needed.

ii

BX-320 User’s manual

Product Configuration Image

* See the Product Configuration List to check if all the components are included for the specified number of units.

Copyright

No part of this document may be copied or reproduced in any form by any means without prior written

consent of CONTEC CO., LTD.

CONTEC CO., LTD. makes no commitment to update or keep current the information contained in this

document.

The information in this document is subject to change without notice.

All relevant issues have been considered in the preparation of this document. Should you notice an

omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.

Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may

appear in this document or for results obtained by the user as a result of using this product.

Trademarks

Intel, Intel Atom, Intel Core and Celeron are registered trademarks of Intel Corporation. MS, Microsoft

and Windows are trademarks of Microsoft Corporation. Other brand and product names are trademarks

of their respective holder.

Product

guide

The main body

M3 screw x 6

Cable clamp set

Product guide

IPC

Precaution

List

Rubber foot

x 4

Warranty

Certificate

Warranty Certificate

Setup Procedure

Document

Setup

Procedure

Document

Royalty

consent

contract

Royalty consent

contract

Recovery Media

Serial number label

F&eIT module

fittings x 2

Power connector

Power connector &

CFast card removal

prevention fittings

(Flat head)

M3 screw x 3

(Pan head)

CFast User

’s Guide

CFast

User

’

s

Guide

IPC Precaution

List

BX-320 User’s manual

iii

Table of Contents

Check your package ..................................................................................................................................... i

Copyright ..................................................................................................................................................... ii

Trademarks .................................................................................................................................................. ii

Table of Contents ....................................................................................................................................... iii

1. INTRODUCTION 1

About the Product........................................................................................................................................ 1

Features ................................................................................................................................................. 2

Supported OS ....................................................................................................................................... 3

Support Software.................................................................................................................................. 3

Customer Support ........................................................................................................................................ 4

Web Site................................................................................................................................................ 4

How to Obtain Service ................................................................................................................................ 4

Liability ........................................................................................................................................................ 4

Safety Precautions ....................................................................................................................................... 5

Safety Information ............................................................................................................................... 5

Caution on the BX-320 Series ............................................................................................................ 5

Security Warning ......................................................................................................................................... 8

2. SYSTEM REFERENCE 9

Specifications............................................................................................................................................... 9

Power Management Features ................................................................................................................... 11

Power Requirements ................................................................................................................................. 12

Power Consumption........................................................................................................................... 12

Physical Dimensions ................................................................................................................................. 13

3. HARDWARE SETUP 15

Before Using the Product for the First Time .......................................................................................... 15

Hardware Setup ......................................................................................................................................... 16

Inserting an Embedded CFast Card .................................................................................................. 16

Installing a CFast card in slot CFast1 .............................................................................................. 17

Mounting the Device Module ........................................................................................................... 18

Removing the Module ....................................................................................................................... 18

Removing a DIN Rail Installation Metal Fittings ........................................................................... 19

Mounting on a DIN rail installation metal fittings .......................................................................... 20

Removing from a DIN Rail ............................................................................................................... 21

Securing the expansion connector cable and attaching the cover .................................................. 22

Installation Requirements.................................................................................................................. 23

iv

BX-320 User’s manual

4. BIOS SETUP 27

Introduction................................................................................................................................................ 27

Starting Setup ............................................................................................................................................ 27

Using Setup ................................................................................................................................................ 28

Getting Help ....................................................................................................................................... 28

In Case of Problems ........................................................................................................................... 28

A Final Note About Setup ................................................................................................................. 28

Main Menu ................................................................................................................................................. 29

Setup Items ......................................................................................................................................... 29

Main............................................................................................................................................................ 30

Advanced ................................................................................................................................................... 31

Trusted Computing ............................................................................................................................ 32

ACPI Settings ..................................................................................................................................... 34

Super IO Configuration ..................................................................................................................... 35

H/W Monitor ...................................................................................................................................... 37

CPU Configuration ............................................................................................................................ 38

PPM Configuration ............................................................................................................................ 39

SATA Configuration ......................................................................................................................... 40

CSM Configuration ........................................................................................................................... 41

Chipset........................................................................................................................................................ 42

North Bridge ....................................................................................................................................... 43

Intel IGD Configuration .................................................................................................................... 44

South Bridge Configuration .............................................................................................................. 46

Azalia HD Audio Configuration....................................................................................................... 47

Security ...................................................................................................................................................... 50

Secure Boot menu .............................................................................................................................. 52

Boot Configuration ................................................................................................................................... 53

Save & Exit ................................................................................................................................................ 55

5. EACH COMPONENT FUNCTION 57

Component Name ...................................................................................................................................... 57

Front View .......................................................................................................................................... 57

System Configuration ............................................................................................................................... 58

Component Function ................................................................................................................................. 59

LED: POWER, ACCESS, L1, L2 .................................................................................................... 59

DC Power Input Connector: DC-IN ................................................................................................. 59

POWER SW: POWER-SW .............................................................................................................. 60

User Programmable Switch: uSW .................................................................................................... 60

Line out Interface: LINE OUT ......................................................................................................... 60

Microphone input Interface: MIC .................................................................................................... 60

Analog RGB Interface: A-RGB ....................................................................................................... 61

BX-320 User’s manual

v

USB3.0 Port: USB3.0 ........................................................................................................................ 62

USB2.0 Port: USB2.0 ........................................................................................................................ 62

Giga bit-Ethernet: LAN A, B ............................................................................................................ 63

CFast Card Connector: CFast1 ......................................................................................................... 64

Serial Port Interface: SERIAL A, B .............................................................................................. 65

BUS EXPANDER (PCIe) ................................................................................................................. 66

F&IT I/F.............................................................................................................................................. 67

6. APPENDIX 73

POST Codes ............................................................................................................................................... 73

Interrupt Level List ................................................................................................................................... 76

SERIAL I/O Address and Register Function .......................................................................................... 77

Watch-Dog-Timer ..................................................................................................................................... 83

Battery ........................................................................................................................................................ 88

Life of CFast .............................................................................................................................................. 89

7. LIST OF OPTIONS 91

vi

BX-320 User’s manual

1. Introduction

BX-320 User’s manual

1

1.

Introduction

About the Product

This product is a small, fanless PC for embedding with a palm-size body that can be mounted on a 35mm

DIN rail.

This product is the successor to the previous BX-300 microcontroller products and it meets the needs of

replacing the BX-300 in systems. The exterior of this product has the same dimensions. The functionality

of this product can also be expanded in ways such as adding digital I/O by connecting F&eIT Series

device modules.* This product utilizes the Intel

®

Atom™ Processor E3845 for the CPU. This product is

equipped with an external expansion connector that can be connected by cable to an expansion chassis for

PCI/PCI Express expansion boards.

* Windows Embedded Standard 7 32bit only

This product is available in the following 3 models:

- Base model with Intel Atom Processor E3845 1.91GHz

BX-320-DC700000 (Memory 4GB, ECC, without OS, without CFast)

- OS-installed model with Intel Atom Processor E3845 1.91GHz

BX-320-DC731314 (Memory 4GB, ECC, Windows Embedded Standard 7 32bit (Japanese, English,

Chinese, Korean), CFast Card (SLC) 16GB)

BX-320-DC781724 (Memory 4GB, ECC, Windows 10 IoT Enterprise LTSB 2016 64bit (Japanese,

English, Chinese, Korean), CFast Card (Q-MLC) 32GB)

1. Introduction

2

BX-320 User’s manual

Features

- Contributes to reducing running costs and energy efficiency

While inheriting the basic functionality of the previous BX-300 Series, this product achieves further

decreases in power usage and increases in speed while maintaining sufficient performance by employing

a low power platform featuring the Intel® Atom™ Processor E3845 for the CPU

- Contributes to equipment miniaturization. PC functionality and expandability concentrated into a

small form (94.0 (W) x 120.0 (D) x 74.7 (H))

The small chassis (94.0 (W) x 120.0 (D) x 74.7 (H)) is equipped with a variety of interfaces including

VGA, USB3.0 x 1, USB 2.0 x 3, RS-232C x 2, LAN x 2 (1000BASE-T, 100BASE-TX), Audio, and the

F&eIT I/F (for F&eIT Series device modules). This product is also equipped with a PCIe connector that

can be connected to an external expansion chassis. This product has the same dimensions as the previous

BX-300 Series products, so it can be swapped into existing systems.

- Fanless design reduces maintenance and inspection work

This product features a completely spindle-free design that eliminates the CPU fan and uses a CFast card

for storage. The use of components that deteriorate with age has been held down as much as possible,

which greatly reduces the burden of maintenance and inspection work.

- Remote power management functions that save operational labor

This product supports Wake On LAN to externally start the PC via the network and Power On by Ring to

start the PC by the modem receiving a call. This makes it capable of providing large operational labor

savings.

- Freely expandable peripherals. Twin CFast card slots and other abundant interfaces

This product is equipped with expandable interfaces including 1000BASE-T x 2, USB 3.0 x 1, USB 2.0 x

3, and serial interfaces (RS-232C) x 2. It is also equipped with two CFast card slots (one slot is internal)

so the data and operating system can be separated. This is very convenient for forms of operation such as

using one slot to run the system and one slot for maintenance, or using one slot to take home system logs

and sampled data.

- Usable as a controller for F&eIT Series measurement, control, and communication devices *1

This product can be used as a controller for F&eIT Series measurement, control, and communication

devices. Device modules including digital I/O, analog I/O, and serial communication can be used as

measurement, control, and communication devices.

- Up to eight F&eIT Series device modules can be connected to the F&eIT I/F *1

The F&eIT I/F can accommodate up to eight F&eIT Series device modules (maximum total current of

each module is 3A or less).

*1 Windows Embedded Standard 7 32bit only

- Expandable with PCI boards and/or PCI Express boards

With a single separately sold cable, this product can connect to a PCI Express Cable expansion chassis

which enables expansion by PCI/PCI Express boards.

- Possibly installed in 35mmDIN rail

A detachable metal installation part for attaching the main unit to a 35mm DIN rail is bundled by default,

which can be used according to the installation conditions. The system features a unique configuration for

its connection to a module on the side in a stacking manner, which allows you to configure the system

simply and elegantly without using backplanes and other connecting devices.

1. Introduction

BX-320 User’s manual

3

- Safety design required for embedded applications

For Windows Embedded Standard installed model or Windows 10 IoT Enterprise LTSB 2016 64bit

installed model, it is possible to use the WF *2 function of OS. It is designed for safety required for

embedding purpose, for example, prohibiting unwanted writing to the CFast card with EWF function will

relieve the concern about the writing limits to the CFast card and prevent an unintentional system

alteration.

*2 EWF (Enhanced Write Filter) is a function of Windows Embedded Standard.

UWF(Unified Write Filter) is a function of Windows 10 IoT Enterprise LTSB 2016.

They protect the disk from being actually written by redirecting the writing to RAM.

- A wide range of power supplies (10.8 - 31.2VDC) supported

As the product supports a wide range of power (10.8 - 31.2VDC), it can be used in a variety of power

environments.

Supported OS

- Windows Embedded Standard 7 32bit (Japanese, English, Chinese, Korean)

- Windows 10 IoT Enterprise LTSB 2016 64bit (Japanese, English, Chinese, Korean)

2.10 or more than it of a main-frame BIOS version is an operating conditions of Windows 10.

Support Software

You should use CONTEC support software according to your purpose and development environment.

Driver library

API-SBP(W32)

(Available for downloading (free of charge) from the CONTEC web site.)

It is the Windows version driver library software that provides stack-connected commands to F&eIT

series measurement/control/ communication device module in the form of Win32 API functions (DLL).

Various programming languages such as Visual Basic and Visual C++ can be used to create high-speed

application software which maximizes the features of the F&eIT module. In addition, a diagnostic

program, which is useful for operation verification, is also provided.

< Operating environment >

OS Windows Embedded Standard 2009

Adaptation language Visual C++, Visual Basic, etc.

You can download the updated version from the CONTEC’s Web site (https://www.contec.com/). For

more details on the supported OS, applicable language and new information, please visit the CONTEC’s

Web site.

* API-SBP(W32) and API-PAC(98/PC) cannot be used at the same time. Use the WDM driver of

API-PAC.

CAUTION

1. Introduction

4

BX-320 User’s manual

Customer Support

CONTEC provides the following support services for you to use CONTEC products more efficiently and

comfortably.

Web Site

https: //www.contec.com/

Latest product information

CONTEC provides up-to-date information on products.

CONTEC also provides product manuals and various technical documents in the PDF.

Free download

You can download updated driver software and differential files as well as sample programs available in

several languages.

Note! For product information

Contact your retailer if you have any technical question about a CONTEC product or need its price,

delivery time, or estimate information.

How to Obtain Service

For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please

obtain a Return Merchandise Authorization number (RMA) from the CONTEC group office where you

purchased before returning any product.

* No product will be accepted by CONTEC group without the RMA number.

Liability

The obligation of the warrantor is solely to repair or replace the product. In no event will the warrantor be

liable for any incidental or consequential damages due to such defect or consequences that arise from

inexperienced usage, misuse, or malfunction of this device.

1. Introduction

BX-320 User’s manual

5

Safety Precautions

Understand the following definitions and precautions to use the product safely.

Safety Information

This document provides safety information using the following symbols to prevent accidents resulting in

injury or death and the destruction of equipment and resources. Understand the meanings of these labels

to operate the equipment safely.

DANGER indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury or in property damage.

Caution on the BX-320 Series

Handling Precautions

- Always check that the power supply is turned off before connecting or disconnecting power cables.

- Do not modify the product.

- Always turn off the power before inserting or removing circuit boards or cables.

- This product is not intended for use in aerospace, space, nuclear power, medical equipment, or other

applications that require a very high level of reliability. Do not use the product in such applications.

- If using this product in applications where safety is critical such as in railways, automotive, or

disaster prevention or security systems, please contact your retailer.

- Do not attempt to replace the battery as inappropriate battery replacement poses a risk of explosion.

- For battery replacement, contact your retailer as it must be performed as a process of repair.

- When disposing of a used battery, follow the disposal procedures stipulated under the relevant laws

and municipal ordinances. For details on replacing the battery, refer to the appendix.

DANGER

WARNING

CAUTION

WARNING

1. Introduction

6

BX-320 User’s manual

- Do not use or store this product in a location exposed to high or low temperature that exceeds range

of specification or susceptible to rapid temperature changes.

Example: - Exposure to direct sun

- In the vicinity of a heat source

- Do not use this product in extremely humid or dusty locations. It is extremely dangerous to use this

product with its interior penetrated by water or any other fluid or conductive dust. If this product

must be used in such an environment, install it on a dust-proof control panel, for example.

- Avoid using or storing this product in locations subject to shock or vibration that exceeds range of

specification.

- Do not use this product in the vicinity of devices that generate strong magnetic force or noise. Such

products will cause this product to malfunction.

- Do not use or store this product in the presence of chemicals.

- To clean this product, wipe it gently with a soft cloth dampened with either water or mild detergent.

Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent pealing or

discoloration of the paint.

- This product’s case may become hot. To avoid being burned, do not touch that section while this

product is in operation or immediately after turning off the power. Avoid installation in a location

where people may come into contact with that section.

- CONTEC does not provide any guarantee for the integrity of data on CFast.

- Always remove the power cable from the power outlet before mounting or removing an expansion

board and before connecting or disconnecting a connector.

- Always remove the power cable from the power outlet before connecting or disconnecting a

connector.

- As for the product with a D-SUB connector, the appropriate tightening torque for the cable connector

is less than 2 kgf·cm.

- To prevent corruption of files, always shutdown the OS before turning off this product.

- CONTEC reserves the right to refuse to service a product modified by the user.

- In the event of failure or abnormality (foul smells or excessive heat generation), unplug the power

cord immediately and contact your retailer.

- To connect with peripherals, use a grounded, shielded cable.

- The CFast card connector doesn't support hot plug. The pulling out opening of the CFast card cannot

be done in the state of power supply ON. Please neither pulling out opening of CFast in the state of

power supply ON of this product nor come in contact with CFast. This product may malfunction or

cause a failure.

- If you use any other CFast than our CFast, we can not guarantee this product’s specification. When

you newly select CFast for this product, you should read “Chapter 7” at first. If you select

unpreferable CFast, the system may work out of order.

- Component Life:

(1) Battery---The internal calendar clock and CMOS RAM are backed by a Lithium primary battery.

The backup time at a temperature of 25°C with the power disconnected is 10 years or

more.

(2) CFast --- Window installed model uses a CFast card in the OS storage area.

The estimated failure rate is 1 every 60,000 rewrites for SLC models and 1 every 2000

rewrites for MLC models and 1 every 20,000 rewrites for Q-MLC models.

* Replacement of expendables is handled as a repair (there will be a charge).

* The service life for consumable parts are reference values and are not guaranteed values.

* This product's specifications allow the device to be rebooted from the BIOS screen during startup.

CAUTION

1. Introduction

BX-320 User’s manual

7

This has no effect on operation after the OS boots

FCC PART15 Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

NOTE

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

1. Introduction

8

BX-320 User’s manual

Security Warning

When connecting to the network, be aware of security-related problems. See the examples of Security

measures below and set up the product properly along with the network devices.

[Information security risks]

- Unauthorized access from the outside through a network could cause the system halt, data damage, or

exposure to malware

*1

.

- Invaded and used as a stepping stone, a device might attack the others through networks.

(a victim becomes an assailant)

- Information might leak without realizing due to the connection to the network.

- Secondary damages such as harmful rumors, liability in damages, social credibility fall, and opportunity

loss are expected led by the troubles described above.

*1… Malware (Malicious Software) is software that brings harm to a computer system and performs unintended operations.

[Security measures - e.g.]

- Do not keep using the default password. (Refer to the product manual for the password setting).

- Set a strong password.

⇒Combined with upper and lowercase letters, and numbers so that it cannot be easily analogized

by others.

- Change the password periodically.

- Disable unnecessary network services and functions.

- Restrict access to the network with network devices.

*2

- Restrict ports to be released on the network with network devices.

- Create a closed network connection using such as dedicated network or VPN

*3

.

*2…Inquire for setting procedure to manufacturers.

*3…VPN (Virtual Private Network): a secured network that wards off unauthorized access by protecting the communication path with

authentication and encryption.

Unfortunately, there are no perfect ways to avert unauthorized access or close a security hole that are

endlessly found day and night. Please understand that risks are always involved with the Internet

connection, and we strongly recommend a user should constantly update information security measures.

2. System Reference

BX-320 User’s manual

9

2.

System Reference

Specifications

Table 2.1. Functional Specifications < 1 / 2 >

Model

BX-320-DC7xxxxx

CPU Intel® Atom™ Processor E3845 1.91GHz

BIOS

BIOS (mfd. by AMI)

Memory

4GB, 204pin SO-DIMM socket x 1, PC3-10600(DDR3L 1333) ECC

Graphic

Intel® HD Graphics (built-in CPU)

System

resolution

Analog RGB

640x480, 800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x768,

1,280x800, 1,280x960, 1,280x1,024, 1,360x768, 1,366x768, 1,400x1,050, 1,440x900,

1,600x900, 1,680x1,050, 1,920x1,080, 1,920x1,200 (16,770,000 colors)

Audio

HD Audio compliant, LINE OUT x 1, MIC IN x 1

CFast card slot

2 slot, CFast CARD Type I x 2 bootable

BX-320-DC73131x: Built-in CFast card slot (SLC) (16GB, 1 partition) *1

BX-320-DC781724: Built-in CFast card slot (Q-MLC) (32GB, 1 partition) *1

Other models: none

LAN *2

Intel I210IT Controller

1000BASE-T/100BASE-TX/10BASE-T 2 port (Wake On LAN support)

USB

USB 3.0 compliant 1 port

USB 2.0 compliant 3 port

Serial I/F

RS-232C (general-purpose) : 2port (SERIAL PORTA, B), 9pin D-SUB connector (male)

Baud rate : 50 - 115,200bps

Watchdog timer

Software programmable, 255 level (1sec - 255 sec) Causes a reset upon time-out.

Hardware monitoring

Monitoring CPU temperature, power voltage

RTC/CMOS

Lithium backup battery life: 10 years or more.

The real-time clock is accurate within ±3 minutes (at 25°C) per month

Power Management

Power management setup via BIOS, Power On by Ring / Wake On LAN,

Supports PC98/PC99 ACPI Power management

Secutity (TPM)

TCG TPM2.0

F&eIT I/F *3

It can be accommodated up to 8 F&eIT series device modules.(Max.3A)

BUS EXPANDER(PCIe)

PCI Express 1.0a (x1) compliant PCI Express cable port

*1: The capacity of CFast is a value when 1GB is calculated by 1 billion bytes. The capacity that can be recognized from

OS might be displayed fewer than an actual value.

2. System Reference

10

BX-320 User’s manual

Table 2.1. Functional Specifications < 2 / 2 >

Model

BX-320-DC7xxxxx

Interface

Display

Analog RGB x 1 (15pin D-SUB connector)

Audio

LINE OUT : 3.5φ Stereo mini jack, Full-scale output level 1.4Vrms(Typ.)

MIC IN : 3.5φ Stereo mini jack, Full-scale input level 1.4Vrms(Typ.)

CFast card slot

2 slot, CFast CARD Type I x 2, bootable

BX-320-DC700000:-

BX-320-DC73131x:Built-in CFast card slot contains a CFast card (SLC) .

(16GB, 1 partition)*1

BX-320-DC781724:Built-in CFast card slot contains a CFast card (Q-MLC) .

(32GB, 1 partition)*1

LAN *2 2 port (RJ-45 connector)

USB

USB3.0 compliant 1port (TYPE-A connector x1)

USB2.0 compliant 3port (TYPE-A connector x3)

RS-232C

2 port (9pin D-SUB connector [male])

F&eIT *3

1 port

PCI Express cable 1 port (18pin PCI Express External Cabling connector)

Power supply

Rated input voltage

12 - 24VDC *4

Range of input

voltage

10.8 - 31.2VDC

Power consumption

12V 1.5A, 24V 0.9A

(When no using USB-powered or F&eIT-powered peripherals)

12V 4.2A, 24V 2.2A

(When using USB-powered or F&eIT-powered peripherals)

External device power

supply capacity

CFast card slot: +3.3V: 1A(500mAx2)

USB3.0 I/F: +5V: 0.9A (900mAx1)

USB2.0 I/F: +5V: 1.5A (500mAx3)

F&eIT I/F: +5V: 3A

Physical dimensions

(mm)

94 (W) x 120(D) x 74.7(H) (No protrusions)

Weight

About 1.0kg (Excluding attachment fittings)

*2: If you use the 1000BASE-T, be careful of the operating temperature.

For more details on this, refer to chapter3, Installation Requirements.

*3: Windows Embedded Standard 7 32bit only

*4: Use a power cable shorter than 3m.

2. System Reference

BX-320 User’s manual

11

Table 2.2. Installation Environment Requirements

Model

BX-320-DC7xxxxx

Ambient

specifications

Operating temperature

*5

0 - 60°C (With 1000BASE-T: 0 - 55°C), airflow 0.7m/s

0 - 50°C (With 1000BASE-T: 0 - 45°C), no airflow

Storage temperature

-10 - 60°C

Humidity

10 - 90%RH (No condensation)

Floating dust particles

Not to be excessive

Corrosive gases

None

Line-noise

resistance

Line noise

AC line / ±2kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)*6,

Signal line / ±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)

Static

electricity

resistance

Contact discharge / ±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)

Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)

Vibration

resistance

Sweep

resistance

10 - 57Hz/semi-amplitude 0.15 mm 57 - 150Hz/2.0G

40 min. each in x, y, and z directions

(JIS C60068-2-6-compliant, IEC60068-2-6-compliant)

Impact resistance

15G, half-sine shock for 11 ms in x, y, and z directions

(JIS C60068-2-6-compliant, IEC60068-2-6-compliant)

Grounding

Class D grounding, SG-FG / continuity

Standard

VCCI Class A, FCC Class A,

CE Marking (EMC Directive Class A, RoHS Directive)

*5: Derating occurs due to the way of installation. For more details on this, refer to the “Installation Requirements” in

chapter 3.

*6: When AC-DC power supply unit “DLP75-24-1(manufactured by TDK-Lambda)” is used.

Power Management Features

- Support both ACPI (Advanced Configuration and Power Interface).

- ACPI v2.0 compliant

- Hardware automatic wake-up

2. System Reference

12

BX-320 User’s manual

Power Requirements

Your system requires a clean, steady power source for reliable performance of the high frequency CPU on

the product, the quality of the power supply is even more important. For the best performance makes sure

your power supply provides a range of 10.8 V minimum to 31.2 V maximum DC power source.

Power Consumption

For typical configurations, the CPU card is designed to operate with at least a 60W power supply. The

power supply must meet the following requirements:

- Rise time for power supply: 2 ms - 30 ms

The following table lists the power supply’s tolerances for DC voltages:

Table 2.3. DC voltage tolerance

DC Voltage

Acceptable Tolerance

+ 12V - 24V

+ 10.8V - 31.2V

2. System Reference

BX-320 User’s manual

13

Physical Dimensions

BX-320-DCxxxxxx

*1: Ensure that the penetration depth (L) from the chassis surface to the screw tip is 3 mm or lower for the top and

bottom and 4 mm or lower for the back.

Figure 2.1. BX-320-DCxxxxxx (Including screw hole dimensions *1)

*2: To secure this product with the included fittings, use the included screws (M3x7). In other situations, use screws

with a penetration depth (L) from the chassis surface to the screw tip of 3 mm or lower.

Figure 2.2. BX-320-DCxxxxxx (When mounting the DIN rail installation metal fittings *2)

Page is loading ...

Contec BX-320 Owner's manual

Contec BX-320 Owner's manual

Related papers

Other documents