DreamLine SHEN-6134600-08 Installation guide

Type
Installation guide
PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION
For more information about DreamLine
®
products please visit DreamLine.com
ENIGMA-X
SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS
©2019 DreamLine
®
All Rights Reserved
ENIGMA-X ENCLOSURE MANUAL CHOICE COVER PAGE
72”
60”
60”
72”
door
door
door
door
Standard Bracket
OR
OR
Reversible Bracket
STEP 2: Install Shower Door
STEP 1: Install Return Panel
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION
1-866-731-2244
ENIGMA-X/ENIGMA-XO Enclosure Return Panel
S
HOWER ENCLOSURE RETURN PANEL INSTALLATION INSTRUCTIONS
Do Not Return Product to the Store. Contact DreamLine® with any questions
IMPORTANT!
DreamLine
®
reserves the right to alter, modify or redesign products at any time without prior notice for the
purpose of product improvement and customer experience. Please refer to the model’s web page on
DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional
product details.
Use this
manual
first
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019
©2019 DreamLine
®
All Rights Reserved
*Right-hand Return Panel installation shown.
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
This model is treated with DreamLine’s
exclusive ClearMax
TM
Glass technology.
This is a specially formulated coating
that prevents the build up of soap and
water spots.
Install the surface with the ClearMax
TM
label towards the inside of the shower.
Please note that depending on the
model, the glass may be coated on
either one or both surfaces.
For best results, squeegee the glass after
each use and dry with a soft cloth.
Installation Date
OD Number
(optional)
SKU Number
*found on the shipping box or label
if available.
Purchase Order
Number
Store/Vendor
Purchased From
Installed By:
Record the following purchase information for your records or in the event you need to contact DreamLine
®
:
ENIGMA-X/ENIGMA-XO Enclosure Return Panel
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019
©2019 DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Table of Contents
Section Title Page #
ClearMa Coating Information
Warnings and General Preparation 3
---
Model Specific Preparation 4
Applications 5
Tools 6
Shower Enclosure Plan 7-8
Detailed Diagram of Return Panel Components: Option 1 9
Detailed Diagram of Return Panel Components: Option 2 10
Parts List 11
Installation Steps: Option 1 12-18
Installation Steps: Option 2 19-25
Glass Connector Installation 26
Reversible Bottom Corner Bracket Feature 27
Product Maintenance 28
Troubleshooting 29
Factory Part Information 30
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019
2
©2019 DreamLine
®
All Rights Reserved
Symbol Legend
!
TIP
NOTE
TIP - for ease of installation.
NOTE - take note of special
feature; additional information.
INCORRECT -
not recommended.
CORRECT -
recommended.
REQUIRED -
requires special
attention; signifies
a warning.
STOP -
denotes pausing
installation to continue
in an accompanied manual
!
This Return Panel is not sold as or intended to be a stand-alone product.
This Stationary Return Panel Glass must be installed first as part of an
Enigma-X or Enigma-XO shower enclosure.
Average Installation Time
30 min
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
WARNING DISCLOSURE STATEMENT
WARNING DISCLOSURE STATEMENT
IMPORTANT
DreamLine® reserves the right to alter, modify or redesign products any time without
prior notice for product improvement and customer experience. Please refer to the
model’s web page on DreamLine.com for the latest technical drawings, installation
manuals, warranty information or additional product details.
This product should be installed by someone familiar with the construction requirement
s
for this type of project and the care necessary for the safe installation and operation of
the product.
The safety of any installation is the responsibility of the installer.
Professional installation recommended.
(All Models)
Professional installation required.
(Enigma Series)
To prevent damage or serious injury, Do Not lean against the installed panel/door/glass.
To prevent damage or serious injury: Do Not attempt to lift or move a heavy lite of glass
alone. Use an assistant and/or a professional grade glass suction cup.
The installation of some models may require drilling down into the threshold. Contact the
manufacturer of the base, tub, or threshold materi
al with any questions regarding the
drilling of holes into their product.
All drawings in this installation manual are for illustrative purposes only and are not drawn
to scale.
T
EMPERED GLASS WARNING
Your Shower Door Glass Could Shatter Without Warning if Improperly Installed or
Mishandled
Do Not install or operate a shower door if the glass has chipped corners, slivered edges or
is otherwise damaged and/or has been dropped or banged into a hard surface such as
tile, marble or glass.
The main causes of tempered glass breakage are:
o Improper handling, storage or installation
o Misuse/abuse
o Lack of maintenance
o Failure to replace damaged glass
o Improper handling during storage, unpacking and installation:
o Corners and edges are the most susceptible area to damage on a lite of tempered
glass and should be protected and handled with care during storage, unpacking,
installation and operation. A concentrated point of pressu
re or impact with a surface
harder than itself may cause the tempered glass to shatter. The tempered glass may
release immediately, within several hours or even days later.
o Incorrect installation of door hardware, rollers, hinges, channels, stopper or glass:
o Improper installation may include: loose hardware and/or lack of proper gaskets
between the hardware and glass. Additionally, improper al
ignment of guide rails, wall
profiles or other hardware during installation or operation may place stress on the
glass edges and cause it to break.
o This product must be installed by a professional and experienced installer familiar with
the safe handling of tempered glass.
o Improper use of this product:
o Aggressively opening or closing the door may cause trauma to the glass, which can
lead to
breakage. This may occur immediately or hours or even days later.
o The shower door hardware and glass should be inspected periodically:
Instruct the homeowner how to perform a periodic inspection of the shower
hardware and glass - some minor adjustments may be necessary based upon
the use (or misuse) of the shower door. Ensure that the hardware remains tight
and that the door alignment and o
peration are correct. Any adjustments
should be made upon discovery to prevent damage to the product.
Additional considerations should be given to the installation of frameless
tempered glass products in households with young children or an elderly
person due to an increased chance of improper handling. In such cases,
alternatives such as shower curtains or grab bars should be considered.
GENERAL PREPARATION
After opening all boxes and packages, read this introduction carefully. Check that all the
items are included in the package by marking off the components on the “Detailed
Diagram of Product Components” page. Examine all boxes and packages for shipping
damage. If the unit has been damaged, has a finishing defect, or is missing parts; please
contact our Customer Support department within 3 busine
ss days of the delivery date.
Please note that DreamLine® will not replace any damaged products or missing
parts free of charge after 3 business days or if the product has been installed. Please
contact DreamLine® if you have any questions.
Please note that you should refer to your local building codes with questions on
installation compliance standards. Building and plumbing codes may vary by
location, and DreamLine® is not responsible for code compliance standards for your
project and will not accept any returns.
If this unit is going to be installed in a new construction, install all the required plumbing
and drainage before installing the shower. Use a competent and licensed (if required
by local code) plumber for all plumbing installation.
Make sure that prior to beginning the installation, the surfaces are leveled and solid and
will be able to support the t
otal weight of the unit. Also make sure the walls are at right
angles. Irregular installation surface level, radius corners or improper angle of side walls
will result in serious problems for your installation. Please note that some adjustments
and drilling will be necessary during the installation process.
Protect all primary surfaces of the product during installation. Never set your glass dow
n
directly onto a tile floor. Leave corner protectors in place until it is necessary to remove
them. Always use a piece of wood or cardboard to protect the bottom edge and corners
of the glass prior to and during installation.
This unit must be installed upon a finished threshold and against finished walls.
DreamLine
®
shower doors are not designed to be installed into a fiberglass surround due
to the radius corners and lack of a solid surface to mount the hardware.
WARNING: TO AVOID THE RISK OF DAMAGE OR INJURY:
Follow all recommendations and requirements as shown in the installation
instructions.
Perform a thorough inspection of the glass and all parts for any damage prior to
installation. Any damage to tempered glass can cause breakage.
Do Not install damaged glass!
Do Not install or operate a shower or tub door if the glass has chipped corners, sl
ivered
edges or is otherwise damaged. Do Not install or operate a shower or tub door that has
been dropped or banged into a hard surface such as tile, marble or glass.
CAUTION: Contact with any hard surface can damage tempered glass and cause it to
shatter.
This product uses tempered glass. Glass cannot be cut after it has been tempered.
Do Not attempt to cut tempered glass.
DreamLine
®
Glass Shower doors, Tub doors, Inline panels, and Return panels can shatter
due to improper handling or lack of maintenance. Conduct periodic inspections of glass
and all parts for possible damage, missing or loose parts.
Always wear proper safety equipment such as: safety goggles, work gloves and
appropriate footwear during the installation process.
WARNING. Risk of leakage and/or damage. Follow
all instructions regarding the
application of silicone sealant or caulk. Allow 24 hours for the sealant to cure before the
initial use of the shower or tub product. Follow the silicone manufacturer’s
recommendations regarding the use of their product.
Thoroughly read these instructions before installing or using this product.
Leave this manual for the end-user of the product.
!
This product should be installed by someone familiar with the
construction requirements for this type of product and the care
necessary for the safe installation and operation of the product.
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019
3
©2019 DreamLine
®
All Rights Reserved
Professional Installation
required.
!
Certied Professional
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Model Specific Preparation
REQUIRED:
!
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019
4
©2019 DreamLine
®
All Rights Reserved
Contact the manufacturer of the base, tub or
threshold material with any questions regarding
the drilling of holes into their product.
This panel is reversible for left or right-hand
installation. The right-hand return panel
installation is shown as an example throughout
this manual. For the left-hand return panel
installation, simply begin on the opposite wall
and reverse the orientation of the steps shown.
This model is also reversible for left or right-hand
Door installation using the Reversible Bottom
Corner Bracket. Both options are shown in this
manual. See page 5 “Applications” for an
overview of the standard and the reversible
bottom bracket for the return panel.
This door requires professional installation. Two installers recommended.
!
No Out-of-Plumb
Adjustment; Verify
threshold and walls
with a level
Threshold must be
level
2-3/4
minimum
threshold
!
Threshold must be level
2-3/4”
minimum
threshold
±
.0
±
.0
±
0
.0
±
0
.0
Tile
Acrylic
Tub
Attaching the upper guide rail
brackets into a stud or 2×6 wood
reinforcement is recommended.
2” X 6”
!
TIP
TIP
R
L
return
panel
return
panel
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Applications
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019
5
©2019 DreamLine
®
All Rights Reserved
ENIGMA-X Enclosure
Option 1 Option 2
Option 1 Option 2
ENIGMA-XO Enclosure
MODEL #s
SHEN-6132481-##
SHEN-6132601-##
SHEN-6134480-##
SHEN-6134600-##
MODEL #s
SHEN-6132721-##
SHEN-6134720-##
MODEL #s
SHEN-6132722-##
SHEN-6134722-##
This return panel is used with the
Enigma-X enclosure and must be
installed first using this manual.
This return panel is used with the
Enigma-XO enclosure and must be
installed first using this manual.
!
!
door
door
panel
door
door
panel
return
panel
return
panel
return
panel
return
panel
Reversible Bottom Corner Bracket
Standard Bottom Bracket
door
door
panel
panel
panel
door
panel
return
panel
return
panel
Reversible Bottom Corner Bracket
door
panel
panel
return
panel
Standard Bottom Bracket
return
panel
MODEL #s
SHEN-6132482-##
SHEN-6134482-##
SHEN-6132542-##
SHEN-6134542-##
SHEN-6132602-##
SHEN-6134602-##
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Tools
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019
6
©2019 DreamLine
®
All Rights Reserved
Soft Head
Hammer
Ø1/8"
(3mm)
Drill Bit
Drill Bit
Ø5/16"
(8mm)
Professional-grade
Glass suction cup
Level
Measure
Tape
Pencil
Drill
Power
Phillips
Screwdriver
Silicone
Work Gloves
Ø3/16"
(4mm)
Drill Bit
Safety Glasses
Unpack your unit carefully and inspect it. Lay it out and identify all parts using the Detailed
Diagram(s) on pages 9 and 10; and packing list in this manual as a reference. Before
discarding the carton, check for small hardware bags that may have fallen to the bottom of
the box. If any parts are damaged or missing, please contact DreamLine
®
for replacement.
The shipping boxes may contain extra parts not used in your model configuration.
Retain these installation instructions for future reference.
NOTE
Be sure to cover the shower drain to prevent losing small parts.
Measure the finished opening before proceeding with the installation
to be sure that the correct model size has been ordered.
Threshold must be level; Walls must be plumb.
!
TIP
TIP
Allen Wrench
(3, 4, 5mm)
Use a good quality waterproof, mildew-resistant 100% silicone caulk.
TIP
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Shower Enclosure Plan
*overall outside dimensions shown for the installed enclosure
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019
7
©2019 DreamLine
®
All Rights Reserved
Install the Return Panel at the proper
location to accomodate the *Shower Door area
Install the Return Panel at the proper
location to accomodate the *Shower Door area
32-1/2” or 34-1/2”
Return Panel
32-1/2” or 34-1/2”
Return Panel
*44-3/8” min - 48-3/8” max
*50-3/8” min - 54-3/8” max
(Enigma-XO only)
*56-3/8” min - 60-3/8” max
Shower Door Area
Shower Door Area
2-3/4” minimum
threshold required
2-3/4” minimum
threshold required
Finished Wall
Finished Wall
Finished Wall
Finished Wall
ENIGMA-X Enclosure with Reversible Bottom
Corner Bracket shown as an example
ENIGMA-X Enclosure with Reversible Bottom
Corner Bracket shown as an example
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Shower Enclosure Plan
*overall outside dimensions shown for the installed enclosure
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019
8
©2019 DreamLine
®
All Rights Reserved
32-1/2” or 34-1/2”
Return Panel
*68-3/8” min - 72-3/8” max
Shower Door Area
2-3/4” minimum
threshold required
!
Consider how the thickness of the
wall treatment (i.e., wallboard, tile,
etc.) will affect the shower enclosure
placement on the threshold.
Compare the overall outside
dimensions of the shower enclosure
model size as shown in the Shower
Enclosure Plan with the finished
threshold before proceeding with the
installation to ensure proper fit.
*outside dimensions of installed shower enclosure
44-3/8” min - 48-3/8” max
50-3/8” min - 54-3/8” max
56-3/8” min - 60-3/8” max
68-3/8” min - 72-3/8” max
32-1/2” or
34-1/2”
2-3/4
minimum
threshold
!
Threshold must be level
2-3/4”
minimum
threshold
Install the Return Panel at the proper
location to accomodate the *Shower Door area
Finished Wall
Finished Wall
ENIGMA-X 72 Enclosure with standard
Bottom Bracket shown as an example
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Detailed Diagram of Enclosure Return Panel Components: Option 1
Begin
on
Page 12
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019
9
© 2019 DreamLine® All Rights Reserved
The glass surface
with the ClearMax™
label must be
installed to face
inside of the shower
Door Glass
Inline Panel
Glass
*Right-hand Return Panel installation shown with Right-hand door
and standard Glass Bracket
28
09b
18
19
18
19
09b
18
19
27
Return
Panel Glass
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Detailed Diagram of Enclosure Return Panel Components: Option 2
Begin
on
Page 19
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019
10
© 2019 DreamLine® All Rights Reserved
The glass surface
with the ClearMax™
label must be
installed to face
inside of the shower
*Right-hand Return Panel installation shown with Left-hand door
and Reversible Bottom Corner Bracket
28
09b
19
09b
18
32
19
31
27
Door Glass
Inline Panel
Glass
Return
Panel Glass
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Parts List
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019 11
©2019 DreamLine
®
All Rights Reserved
Glass Bracket
Return Panel Glass
Glass-to-Guide
Rail Connector
*
Reversible Bottom
Corner Bracket
Wall Anchor Ø5/16”
ST4.2×55
Truss Head Screw
27
28
19
31
09b
18
x2
x1
x2
x3
x1
x1
ST4.0×40
Pan Head Screw
32
x1
NOTE
*The Reversible Bottom Corner Bracket (#31) is
used for Option #2 installation only! see Page 10.
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Installation Steps: Option 1
Tools Needed
Parts Needed
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019
12
© 2019 DreamLine® All Rights Reserved
*Right-hand Return Panel installation shown.
1
Fig 1
NOTE
This product is reversible for left or right-side return panel installation. The right-side return panel
installation is shown as an example throughout this manual. For the left-side return panel
installation, begin on the opposite wall and reverse the orientaton of the steps shown for Option 1.
27
19
x1
x3
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Tools Needed
Option 1
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019
13
© 2019 DreamLine® All Rights Reserved
2
*see Shower Enclosure Plan
for proper Return Panel Placement
based on the model size
inside
inside
< 48”, < 54”, < 60”, <72”
Fig 2
!
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Tools Needed
Option 1
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019
14
© 2019 DreamLine® All Rights Reserved
3
inside
inside
inside
Fig 3
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Tools Needed
Option 1
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019
15
© 2019 DreamLine® All Rights Reserved
4
inside
Fig 4
inside
inside
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Tools Needed
Parts Needed
Option 1
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019
16
© 2019 DreamLine® All Rights Reserved
5
NOTE
For installation into an Acrylic Threshold:
drill a Ø1/8”(3mm) hole and use the ST4.2 x 55mm
Truss Head Screws (#18)
OR
For installation into a Tile Threshold:
drill a Ø3/16”(4mm) hole to the stud, drill an
Ø1/8”(3mm) pilot hole into the stud and use
the ST4.2 x 55mm Truss Head Screws (#18).
NOTE
If a stud is present behind the wall:
drill a Ø3/16”(4mm) hole up to the stud, drill an
Ø1/8”(3mm) pilot hole into the stud and use the
ST4.2 x 55mm Truss Head Screws (#18)
OR
If no stud is present behind the wall:
drill a Ø5/16”(7mm) hole and insert a Wall Anchor (#09b),
and use the ST4.2 x 55mm Truss Head Screws (#18).
*see NOTE
*see NOTE
Fig 5
09b
18
x2
x3
1 2
1
2
3
3
*see NOTE
*see NOTE
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Tools Needed
Option 1
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019 17
© 2019 DreamLine® All Rights Reserved
6
inside
inside
inside
Fig 6
© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Tools Needed
Option 1
ENIGMA-X and ENIGMA-XO Shower Enclosure Return Panel Manual Ver 1 Rev 2 082019 18
© 2019 DreamLine® All Rights Reserved
Continue with the installation of the Enigma-X or Enigma-XO Shower Enclosure
using the manual that is packaged with the Shower Door Glass.
7
!
Allow 24 hours for the silicone to
cure before using the shower.
NOTE
The surfaces need to be clean and free of debris before applying silicone.
Fig 7
24
Hours
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80

DreamLine SHEN-6134600-08 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI