Contura 810W Style User manual

Page is loading ...

SE

FR

GB

IT

NO

DK

NL

Fakta 3 Données Techniques 9

Facts 12

Dati Tecnici 18

Fakta 6

Fakta 15

Gegevens 21

Installationsavstånd 4 Distances d’installation 10

Installation distances 13

Distanze di sicurrezza 19

Installasjonsavstand 7

Installationsafstand 16

Installatieafstand 22

Prestandadeklaration 5 Déclaration des performance 11

Declaration of performance 14

Dichiarazione di prestazione 20

Ytelseserklæring 8

Præstationserklæring 17

Prestatieverklaring 23

Montering 24 Montage 24

Assembly 24

Montaggio 24

Montering 24

Monteren 24

GB

12

!

3-7 kW 697 mm 465 mm 379 mm 67 kg

Installation by authorised

technician

This manual contains instructions about how

the stoves must be assembled and installed.

To ensure the function and safety of the stove,

we recommend that the installation is carried

out by an authorised technician. Contact one

of our dealers who can recommend suitable

technicians.

Building application

These main instructions may give guidance

which would contravene national building

regulations. Please refer to supplementary

instructions or ask your local authority for

advice regarding building regulations.

Before installing a stove or erecting a chimney

it is necessary for you to make a building

application permission to your local authority.

The owner of the house is personally

responsible for ensuring compliance with the

mandatory safety requirements and must

have the installation approved by a qualified

inspector. Your local chimney sweep must

also be informed about the installation as this

will affect the routines for regular chimney-

sweeping services.

Structural support

Check that the wood joists are strong enough

to bear the weight of the stove and chimney.

The stove and chimney can usually be placed

on a normal wooden joist in a single occupancy

house if the total weight does not exceed

400 kg.

Hearth plate

Due to the risk of falling embers, a flammable

floor must be protected by a hearth plate. It

must extend 300 mm in front of the stove and

100 mm on each side of the stove, or have a

200 mm extension on each side of the opening.

The hearth plate can consist of natural stone,

concrete, metal plate or glass. A glass hearth

plate is available as an accessory for these

models.

Final inspection of the

installation

It is extremely important that the installation

is inspected by an authorised chimney sweep

before the stove is used. Also read the

”Lighting instructions”, before lighting for the

first time.

Nominal effect 5 kW

Efficiency 81 %

Flue gas temperature in the

connection at nominal output 309°C

Flue gas mass flow 4,3 g/s

Type approved in accordance with:

European standard EN-13240

NS 3059 (Norway)

BImSchV.2 (Germany)

Art. 15a B-VG (Austria)

Clean Air Act. (UK)

The stove becomes very hot

During operation, certain surfaces of the

stove become very hot and can cause

burn injury if touched. Be aware of the

strong heat radiated through the hatch

glass. Placing flammable material closer

than the safe distance indicated may

cause a fire. Pyre lighting can cause quick

gas ignition with the risk of damage to

property and personal injury.

Connection to chimney

• The stove must be connected to chimneys dimensioned for a minimum flue

gas temperature of 400°C.

• The external diameter of the connection sleeve is 150 mm.

• Normal chimney draw under nominal operation should be between 20-25

Pa close to the connector. The draft is affected both by the length and

area of the chimney, and by how well sealed it is. Minimum recommended

chimney length is 3.5 m and suitable cross section area is 150-200 cm²

(140-160 mm in diameter).

• A flue with sharp bends and horizontal routing reduces the draught in

the chimney. Maximum horizontal flue is 1 m, on the condition that the

vertical flue length is at least 5 m.

• It must be possible to sweep the full length of the flue and the soot

hatches must be easily accessible.

• Carefully check that the chimney is sealed and that there is no leakage

around soot hatches and flue connections. See page 25.

• The stove meets the requirements for connection to a branched flue pipe.

Supply of combustion air

When a stove is installed in a room, the demand for air supply to the room

increases. Air can be provided indirectly via a vent in the outer wall or via a

duct from the outside that is connected to the connector on the underneath

of the stove. The amount of air needed for combustion is 15 m

3

/h.

The connector for the combustion air has an external diameter of 67 mm.

When duct routing further than 1 m the pipe diameter must be increased to

100 mm and a correspondingly larger wall vent must be selected.

In hot areas, the duct should be insulated with 30 mm mineral wool with a

moisture inhibiting outer cover. It is also important to seal around the hole

in the wall (or floor) of the lead-in using sealant.

A 1 m length of condensation insulated ducting for combustion air is

available as an accessory. See page 25.

Facts

Contura reserves the right to change dimensions and procedures described in these instructions

at any time without special notice. The current edition can be downloaded from www.contura.eu

GB

13

The minimum distance in front of

the stove opening to combustible

parts of the building or interior

decoration must be at least 1,1 m.

E = minimum height to sloped ceiling

from the centre of the chimney

Installation distances

Permitted area for

combustible parts

of the building

* There must be a minimum distance of 50 mm/285 mm. If mounting on Contura’s corner bracket, the distance must be 56 mm/291 mm.

** To prevent discolouration of painted non-flammable walls we recommend that the same side distance as to combustible walls is used.

INSTALLATION AGAINST COMBUSTIBLE WALLS INSTALLATION AGAINST FIREWALLS

C810W Style

465

Min 300 697 Min 1000

Combustible roof

106

563

59

380

Ø150

Air inlet Ø67

582

350

100

196

11

380

250

350

Combustible wall

Fire-retardant wall of

brick or concrete

430**

800

1100

196

380

11

200**

Fire-retardant wall of

brick or concrete

E 630

Min 300 697 Min 1000

50*

320

285*

Fire-retardant wall of

brick or concrete

GB

14

PRODUCT

Type Wood burning stove

Trade name Contura 810W

Intended area of use Heating of rooms in residential buildings

Fuel Wood

MANUFACTURER

Name NIBE AB / Contura

Address Box 134, Skulptörvägen 10

SE-285 23 Markaryd, Sweden

VERIFICATION

According to AVCP System 3

European standard EN 13240:2001 / A2:2004 / AC:2007

Test institute Rein-Ruhr Feuerstätten Prüfstelle, NB 1625.

D e c l a r a t i o n o f p e r f o r m a n c e a c c o r d i n g

to Regulation (EU) 305/2011

DECLARED PERFORMANCE

ESSENTIAL CHARACTERISTICS

PERFORMANCE

HARMONISED TECHNICAL

SPECIFICATION

Fire safety Pass

Fire classification A1

Minimum distance to flammable

materials

Rear: NPD

Side: 350 mm

Ceiling: 1000 mm

Front: 1100 mm

Floor: 300 mm

Corner: NPD mm

Fire hazard due to burning fuel falling out Pass EN 13240:2001 / A2:2004 / AC:2007

Cleanability Pass

Emissions from combustion CO: 0,11%

Surface temperatures Pass

Temperature on the handle Pass

Mechanical resistance Pass

Temperature in the space for wood storage Pass

Nominal output 5,0 kW

Efficiency 81,0%

Flue gas temperature at nominal output 259°C

Flue gas temperature in flue spigot 314°C

The undersigned is responsible for the manufacture and conformity with the declared performance.

Niklas Gunnarsson,

Business area manager NIBE STOVES

Markaryd, December 19, 2019

No. C810W-CPR-191219

24

1

2

5

4

3

SE

FR

NL

GB

IT

NO

DK

Montering

Om insatsen behöver läggas ned för att

förflyttas bör lösa delar demonteras.

Demontering av eldstadsbeklädnad

beskrivs i slutet av denna anvisning.

1 Galler

2 Rostertallrik

3 Eldstadsbeklädnad (Vermiculit)

4 Typskylt

5 Brasbegränsare

Før montering

Hvis innsatsen må legges ned for å flyttes,

bør løse deler demonteres. Demontering

av brennplater og hvelv er beskrevet mot

slutten av denne veiledningen.

1 Gitter

2 Rist

3 Brennplater og hvelv (vermikulitt)

4 Typeskilt

5 Kubbestopper

Avant de procéder au

montage

Les éléments non fixés devront être

déposés si l’insert doit être couché

pour être déplacé. Le démontage de

l’habillage du foyer est décrite à la fin de

ce document.

1 Grille

2 Grille de décendrage

3 Habillage du foyer (Vermiculite).

4 Plaque signalétique

5 Pare-bûches

Prior to installation

If the insert needs to be put down to

be moved, loose components should

be removed. Removal of the hearth

cladding is described at the end of these

installation instructions.

1 Grille

2 Grate disc

3 Hearth cladding (Vermiculite)

4 Type plate

5 Fire bars

Før opstilling

Hvis indsatsen skal lægges ned for at

blive flyttet, bør løsdele afmonteres.

Afmontering af ovnbeklædning beskrives

i slutningen af denne vejledning.

1 Gitter

2 Rund askerist

3 Ovnbeklædning (Vermiculite)

4 Typeskilt

5 Brændeholder

Prima del montaggio

Se è necessario smontare l’inserto per

spostarlo, rimuovere prima i componenti

liberi. La procedura di smontaggio del

rivestimento del focolare è descritta alla fine

delle presenti istruzioni.

1 Griglia

2 Griglia del braciere

3 Rivestimento interno del focolare

(vermiculite).

4 Etichetta prodotto

5 Fermalegna

Voorafgaand aan

montage

Als de inzet liggend moet worden verplaatst,

moeten losse onderdelen worden

gedemonteerd. De demontage van de

haardbekleding wordt beschreven aan het

eind van deze instructies.

1 Rooster

2 Roosterschijf

3 Haardbekleding (vermiculiet)

4 Typeplaatje

5 Houtvanger

25

3

21

SE

NO

FR

GB

DK

IT

NL

4

35

HK

Ø

ca 180 mm

Bakåtanslutning till murad skorsten

Bakmontering til murt skorstein

Raccordement par l’arrière à une

cheminée de maçonnerie

Rear connection to a masonry chimney

Tilslutning bagud til muret skorsten

Collegamento alla canna fumaria in

muratura dal retro della stufa

Achterwaartse aansluiting op een

gemetselde schoorsteen

SE

NO

FR

GB

DK

IT

NL

Tilluft

Arrivée d’air

Supply

Forbrændingsluft

Alimentazione dell’aria

Toevoerlucht

Page is loading ...

32

1

3

2

1

SE

NO

FR

GB

DK

IT

NL

Luckan kan spärras i öppet läge, med hjälp av låsarmen på kaminens

vänstra sida.

Uppställning av luckan

Låsing av døren i åpen posisjon

Døren kan låses i åpen posisjon, ved hjelp av låsearmen på venstre

siden av ovnen.

Mise en place de la porte

La porte peut être verrouillée en position ouverte, à l’aide du levier de

verrouillage situé sur le côté gauche du poêle.

The door can be secured in the open position using the locking lever

on the left side of the stove.

Installation of the door

Spærring af lågen

Lågen kan spærres i åben position ved hjælp af låsearmen på

venstre side af brændeovnen.

Lo sportello può essere bloccato in posizione aperta con una levetta di

blocco posta sotto la parte sinistra della stufa.

Bloccaggio dello sportello

De deur kan in geopende stand worden vastgezet met behulp van de

vergrendeling aan de linkerzijde van de kachel.

Plaatsen van het luik

33

1

2

3 4

1

SE

NO

FR

GB

DK

IT

NL

Demontera eldstadsbeklädnaden (Vermiculit)

Slik demonterer du ildstedsbekledningen (Vermikulitt)

Voici comment démonter l’habillage du foyer (Vermiculite)

How to remove the hearth surround (Vermiculite)

Sådan afmonterer du ovnbeklædningen (Vermiculite)

Come smontare il rivestimento del focolare (vermiculite)

Zo demonteert u de kachelbekleding (vermiculiet)

Handle with care!

!

Page is loading ...

811437 IAV SE-EX C810W Style-2

2020-10-08

NIBE AB · Box 134 · 285 23 Markaryd · Sweden

contura.eu

Contura 810W Style User manual

This manual is also suitable for

Contura 810W Style User manual

Related papers

Other documents