TREATLIFE SS02SH User manual

  • Hello! I've reviewed the user manual for the Treatlife Light Switch SS02SH. This document provides detailed instructions on how to install and set up your new smart light switch, including wiring, app configuration, and integration with voice assistants like Alexa and Google Assistant. I'm ready to assist you with any questions you might have about the installation process, features, or troubleshooting steps.
  • Is a neutral wire required to install this switch?
    How do I pair the device with the app?
    What should I do if the light switch does not work?
3.1 IOS system paring method
Press and hold the mechanical on / off button for 5seconds
until the red indicator light blinks
1.Click on “Profile”
2.Tap “HomeKit Information”
3.Tap “Add Homekit Device”(Make sure the red led
indicator is flahing)
4.Scan the QR code(the QR code is next to the
push button on the switch )
3.2 Android system paring method
Press and hold the mechanical on / off button for
5seconds until the red indicator light blinks.
Blinking Pairing method
Please make sure the red indicator light is blinkingwhen you
are attempting to connect to the APP .
Controlling this HomeKit-enabled accessory automati-
cally and away from home requires an Apple TV,an iPad
or a Homepod set up as a home hub.The iOS latest
version is recommended.
SS02SH
the QR code is
printed next to the
push button on the
switch
/