About this item
●2x15L Capacity Stainless Steel Construction: Coming with 2 large tanks with a total capacity of 30 L/ 8 US
gallons (15 L/ 4 per tank), our slushy machine serves about 120 cups of delicious slushies and frozen drinks to a
large number of people. 3-layer thickened stainless steel body gives long life and high performance at rust-proof,
abrasion-proof. Dual food-grade PC bowls are designed with a clear, highly visible casing so your beverages can
be clearly identified.
●Rapid Refrigeration: 30-45 min to prepare smoothies can be easily achieved. Advanced specification of 700-watt
powerful compressor and all copper condenser reduces freeze downtimes and promotes efficient operation. There
is much less waiting time for your beverages to reach optimal temperature. Capable of serving anything from
granitas and smoothies to iced or frozen coffee/tea and frozen cocktails, this unit is sure to expand your beverage
menu substantially.
●Precise Control Panel: Easy-to-use controls are intuitive and customizable enough to offer various drink styles.
The slush and cold drink mode allows you to adjust the temperature and consistency until it is ideal. Each bowl
operates independently from the other. A mixing switch is designed to control the 360° rotating stirrer, avoiding the
sediment down to the bottom of the tank and ensuring completely mixed smoothies.
●Considerate Designs: Separate lid opening for conveniently DIY drinks; Easy-flow spout dispenses smooth
frozen drinks consistently; Drip tray can not only effectively catch/collect drips but also detachable for cleanup and
maintenance. Three-side air vents for heat dissipation; Rubber feet provide buffer function and protection.
● All these human-friendly designs are for giving you a better cooling experience.
●Versatile Application: Cold beverage temperature keeps at -3℃~-2℃ (26.6-28.4℉). The
frozen drinks machine is perfect for convenience stores, hotels, dessert shops, drink shops,
cafes, restaurants, etc. Please note that sugar is essential when using the drink machine and
not just using water during the procedure. The sugar content should not be less than 13%
with sucrose and less than 22% with maltose. Meanwhile, after receiving the machine, you'd
better use it 24 hours later.
OVERVIEW
PRODUCT DESCRIPTION
Product Usage
This machine is suitable for making slush and cold drinks, and the operation of this slush machine
must comply with current standards.
Main Parts
The main components of the machine are as follows:
● Bowl lid
● Bowl
● Discharge Handle
● Discharge Port
● Control Panel
● Chassis
● Water Tray
Panel Diagram:
Operation and Storage
All operations described in Chapter 4 must be carried out by professionals in charge of
transporting/handling packaged or unpackaged products.
Be sure to use appropriate equipment depending on the nature and weight of the goods, as well
as relevant stipulations of local regulations.
INSTALLATION
The floor for the machine to be mounted on must be firm and flat. The space should be bright,
well-ventilated and clean Sufficient clearance shall be provided to facilitate unrestricted
operation as well as emergency use. *TIP: Leave 25 cm (10 in.) clearance on the top of the
bowl.
Before using the machine for the first time, all the parts must be cleaned, and the parts that are
in contact with the slush need to be handled carefully; for more details, please read relevant
section.
Power Connection
Make sure the main switch is at “0” before you plug in.
Warning: The power socket must be arranged in a place easily accessible by the user.
Operation
Before the machine is started for the first time, it must be checked by a professional technician to
see whether its function can work well.
Material Preparation
Pour the material into the bowl when the machine is off and unpowered.
Warning: Minimum sugar content should not be less than 13% as low concentration may damage
the machine. Remove the lid from the bowl according to the following instructions:
Lift the back of the lid;
Remove the lid from the front retainer. After material was added to the bowl, the lid on the bowl
should be put back.
Wiring diagram
●What is the VEVOR B09BCQVHBB Commercial Slushy Machine used for?
The machine is suitable for making slush and cold drinks
Manuals.plus
●What are the main parts of the VEVOR B09BCQVHBB Commercial Slushy Machine?
The main parts of the machine are the bowl lid, bowl, discharge handle, discharge port, control
panel, chassis, and water tray.
●What are the technical parameters of the VEVOR B09BCQVHBB Commercial Slushy
Machine?
The technical parameters include the model, size, maximum output power, operating voltage,
operating ambient temperature range, bowl number, single bowl capacity, and sound pressure
level.
● How do I change the settings on the control panel of the VEVOR B09BCQVHBB
Commercial Slushy Machine?
Press the "Set key" to enter the user parameter setting state. At this time, press the Set key to
change the setting object, press "temp setting key(-)" and “set key(+)”to change the value. After
5 seconds without operating the key, the system will exit and save the setting value
automatically.
Manuals.plus
●How do I stop the VEVOR B09BCQVHBB Commercial Slushy Machine?
Turn off the main switch to stop the machine.
●What should I do if I receive a low voltage alarm on my VEVOR B09BCQVHBB
Commercial Slushy Machine?
The whole machine will stop. Turn off the power and check the power supply. Restart the
machine after the voltage is stable. If it shows “LLL” frequently, we suggest you connect a
voltage stabilizer.
●How do I stop the VEVOR B09BCQVHBB Commercial Slushy Machine?
Turn off the main switch to stop the machine.
Manuals.plus
●How do I install the VEVOR B09BCQVHBB Commercial Slushy Machine?
The mounting location should be stable and level. Follow all instructions for operation and
handling of the machine.
●How should I store the VEVOR B09BCQVHBB Commercial Slushy Machine?
Clean and disinfect the machine before storing it in an enclosed space to prevent it from being
hit or squeezed. If the machine is to be idle for a long time, take protective measures for its
placement location and storage time.
/
