2. SENMAL
  3. LOCH4630

SENMAL LOCH4630 User manual

  • Hello, I have reviewed the provided user manual for the Oiler kit. This document provides assembly instructions, steps for attaching the components, and how to connect to chainsaw bar. I am ready to answer any questions you may have regarding the installation or features described in this document.
  • What is included in the oiler kit package?
    How do I attach the fasteners?
    How do I connect the tube to the sawmill?
CHINASAW MILL OILER KIT INSTRUCTION
MANUAL
I. Picture of oiler kit
NO
QTY
(Length> 3ft)
PIC
DESCRIPTION
1
1
Oiler kit body
II：Assembling Instruction
1. Unpack the oiler kit package and lay out all parts.
2. Attach one of the Fastener （No.2）to oiler kit body（No.1）,. Do not
tighten until connector(No.3) is attached.
2
2
Fastener
3
1
Connect or
4
1
Tube
3. Attach the second fastener（No.2）to oiler kit body and put the
connector（No.3）in the middle. Tighten all nuts.
4. Assemble the tube（No.4）,to oiler kit body as shown in picture.
5. Take out the tube plug on the sawmill,insert the connector to the
tube of sawmill and make sure it is not easy to fall out.
6. Fasten the screw from other side of the tube to chainsaw bar.(For
some model chainsaw bars without lubricating hole,a hole need to be
drilled.)
/