Oneida Air Systems XCKM013500-VOR Installation guide

Brand: Oneida Air Systems

Model: XCKM013500-VOR

Type: Installation guide

Rev: A 20230503LL Doc. #ZBI000057

E× 2 F× 3

B × 5 C × 5

G × 5 H

× 4

D× 5

1. Only use indoors on level and even oors.

2. Universal Drum Dolly is not a toy. DO NOT allow use by or

near children.

3. Temperature range 0° F – 100° F

4. Maximum Weight Load: 150 lbs.

5. Only use with Oneida Air Systems® products.

ID Part Number Part Description Qty

A ZDB000001 Universal Drum Dolly Body with Threaded Inserts 1

B* AFB155170 5/16-18 x 2-1/2" Hex Head Bolt 5

C* AFW180000 5/16" Flat Washer 5

D* AFT051602 5/16" - 18 Square Nut 5

E* RHC000008 3" Locking Caster with 5/16"-18 x 3/4" Stems 2

F* RHC000009 3" Non-Locking Caster with 5/16"-18 x 3/4" Stems 3

G* RBX000001 Steel Drum Bracket 5

H* RBX000063 Fiber Drum Bracket 4

Universal Drum Dolly

#SDD990000

Please unpack the parts carefully and conrm you have received

each item listed. ere may be leover hardware.

*Part of Hardware Pack AHX000014.

You will need the following:

• Pliers • 1/2" Wrench

Limits of Use:

Rev: A 20230503LL Doc. #ZBI000057

1 Turn the Universal Drum Dolly Body (A)

upside-down. Review the recommended

location for the Locking Casters (E) and

Non-Locking Casters (F) [FIG. 1]. read

the Casters into the threaded inserts marked

"caster" on the bottom of the Universal Drum

Dolly Body [FIG. 1b]. Securely tighten using

the pliers.

Note: readlocker can be used to further secure

the Casters in the Universal Drum Dolly.

2 If you are installing a 5 gallon bucket, place the

pail in the center recess of the Universal Drum

Dolly [FIG. 2a].

If you are installing a steel drum, place the

drum on the Universal Drum Dolly, and

further secure using Bolts (B), Flat Washers

(C), Steel Drum Brackets (G), and Square Nuts

(H) as shown in [FIG. 2b].

Note: Adjust the Steel Drum Brackets to overlap

the bottom rim of the drum. 35 and 55 gallon

drums will only require 4 brackets, while 10, 17,

and 30 gallon drums will require 5 brackets –

readed inserts A, B, and C [FIG. 2d].

If you are installing a 35, or 55 gallon ber

drum, place the drum on the Universal Drum

Dolly, and secure using four Bolts (B), four

Flat Washers (C), four Fiber Drum Brackets

(H) and four Square Nuts (D) as shown in

[FIG. 2c].

Note: Adjust the Fiber Drum Brackets to engage

the recess above the metal rim of the drum's

bottom edge.

Locking

Non-Locking

B B

C C

FIG. 2a FIG. 2b

FIG. 2d

FIG. 2c

Contact our Customer Service Department for further assistance

1-866-387-8822 • support@oneida-air.com • oneida-air.com/contact-us

1001 West Fayette Street, Syracuse, NY 13204 U.S.A.

FIG. 1

Oneida Air Systems XCKM013500-VOR Installation guide

Oneida Air Systems XCKM013500-VOR Installation guide

Oneida Air Systems XCKM013500-VOR Installation guide

Related papers

Other documents