Solt GGSO605TB User manual

Type
User manual
T. 1300 11 4357
E. support@residentiagroup.com.au
E S S E N T I A L S FOR LIFE
An initiative by
Residentia Group
www.solt.house
E S S E N T I A L S FOR LIFE
User
Manual
MODEL/S
GGSO605TB
60cm Built-in Oven
Welcome Congratulations on purchasing
your new Built-in Oven!
The Sôlt brand is proudly distributed
within Australia by Residentia
Group Pty Ltd.
Please refer to the warranty card at the rear of this manual
for information regarding your product’s parts and labour
warranty, or visit us online at www.residentia.group
At Residentia Group, we are customer obsessed and our
Support Team are there to ensure you get the most out of
your appliance. Should you want to learn more about your
rangehood features, and importantly taking care of your
appliance when cleaning, our Support Team are here
to help.
You can use our online Support Centre at anytime by
visiting http://support.residentiagroup.com.au, or you can
contact us via calling us on 1300 11 HELP (4357).
It is important that you read through the following use and
care manual thoroughly to familiarise yourself with the
installation and operation requirements of your appliance
to ensure optimum performance.
Again, thank you for choosing an Sôlt appliance and we
look forward to being of service to you.
Kind Regards,
The Residentia Team
Residentia Group
Head Office.
165 Barkly Ave
Burnley
Victoria 3121
Australia
ACN.
600 546 656
Online.
residentia.group
Contents 2 Welcome
4 Safety Instructions
6 Installation
7 Your Built-in Oven
12 Operating Instructions
15 Cleaning & Maintenance
16 Attach Your Receipt
17 Purchase Details
18 Warranty Information
Welcome Congratulations on purchasing
your new Built-in Oven!
The Sôlt brand is proudly distributed
within Australia by Residentia
Group Pty Ltd.
Please refer to the warranty card at the rear of this manual
for information regarding your product’s parts and labour
warranty, or visit us online at www.residentia.group
At Residentia Group, we are customer obsessed and our
Support Team are there to ensure you get the most out of
your appliance. Should you want to learn more about your
rangehood features, and importantly taking care of your
appliance when cleaning, our Support Team are here
to help.
You can use our online Support Centre at anytime by
visiting http://support.residentiagroup.com.au, or you can
contact us via calling us on 1300 11 HELP (4357).
It is important that you read through the following use and
care manual thoroughly to familiarise yourself with the
installation and operation requirements of your appliance
to ensure optimum performance.
Again, thank you for choosing an Sôlt appliance and we
look forward to being of service to you.
Kind Regards,
The Residentia Team
Residentia Group
Head Office.
165 Barkly Ave
Burnley
Victoria 3121
Australia
ACN.
600 546 656
Online.
residentia.group
Contents 2 Welcome
4 Safety Instructions
6 Installation
7 Your Built-in Oven
12 Operating Instructions
15 Cleaning & Maintenance
16 Attach Your Receipt
17 Purchase Details
18 Warranty Information
4
Safety Instructions
CONDITIONS OF USE
This appliance is intended to be used in household
and similar applications such as farm houses or by
customers in serviced apartments, holiday apartments
and other residential type environments.
Obey the installation instruction supplied with the
appliance.
SAFETY INSTRUCTIONS
Before the installation and use of the appliance,
carefully read the supplied instructions.
The manufacturer is not responsible if an incorrect
installation and use causes injuries and damages.
Always keep the instructions with your appliance for
future reference.
Do not use the oven unless you are wearing something
on your feet. Do not touch the oven with wet or damp
hands or feet.
Some parts of appliance may keep its heat for a long
time; it is required to wait for it to cool down before
touching onto the points that are exposed to the
heat directly.
If you will not use the appliance for a long time, it is
advised to turn the plug o.
WARNING: To prevent any damages to your and
others’ life or property, you have to follow the safety
notes.
WARNING: Caution, risk of re!
CHILDREN & VULNERABLE PEOPLE SAFETY
WARNING: Risk of suocation, injury or permanent
disability.
This appliance can be used by children aged from
8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction for the operation of the appliance by a
person who is responsible for their safety.
Do not let children play with the appliance.
Keep all packaging away from children.
Keep all detergents away from children.
Keep children and pets away from the appliance door
when it is open.
Do not allow children to go near the oven when it is
operating, especially when the grill is on.
Cleaning and user maintenance shall not be made by
children without supervision.
BEFORE INSTALLATION
Remove all the packaging.
Do not install or use a damaged appliance.
When the oven is rst switched on, it may give o an
unpleasant smell. This is due to the bonding agent
used for the insulating panels within the oven. Please
run the new empty oven with the conventional cooking
function, 250 °C for 90 minutes to clean oil impurities
inside the cavity.
During the rst time use, it is completely normal
that the oven will show slight signs of smoke and
unpleasant odors. Please wait for the smell to clear
before putting food into the oven.
Please use this product under the open environment.
The appliance and its accessible parts become hot
during use. Care should be taken to avoid touching
heating elements.
If the surface is cracked, switch o the appliance to
avoid the possibility of electric shock.
During use, the appliance becomes very hot. Care
should be taken to avoid touching heating elements
inside the oven.
Ensure that the appliance is switched o before
replacing the oven lamp to avoid the possibility of
electric shock.
The means for disconnection must be incorporated
in the xed wiring in accordance with the wiring
specications.
Accessible parts may become hot during use.
An all-pole disconnection means must be incorporated
in the xed wiring in accordance with the wiring rules.
The appliance must be installed by an authorised
technician and put into use. The manufacturer is not
responsible for any damage that might be caused by
defective placement, and installation by unauthorised
personnel. Please contact 1300 11 HELP (4357) for
arrange an authorised technician.
5
ELECTRICAL CONNECTION
WARNING: Caution, risk of re and electrical shock!
The appliance must be earthed.
Make sure that the electrical information on the rating
plate agrees with the power supply. If not, contact an
electrician.
Always use a correctly installed shockproof socket.
Do not use multi-plug adapters and extension cables.
Make sure not to cause damage to the mains plug and
to the mains cable. Should the appliance power supply
cable need to be replaced, this must be carried out by
our Service Centre.
Connect the mains plug to the mains socket only at the
end of the installation. Make sure that there is access
to the mains plug after the installation. Do not connect
the appliance plug with a power connection board.
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
Do not touch the mains cable or the mains plug with
wet hands.
CARE & CLEANING
WARNING: Risk of injury or damage to the appliance.
Before maintenance, deactivate the appliance and
disconnect the mains plug.
Do not use a steam cleaner on the appliance.
Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering of
the glass.
PRODUCT DISPOSAL
Disconnect the appliance from the mains supply.
Cut o the mains cable and discard it.
Remove the door catch to prevent children and pets to
get closed in the appliance.
APPLIANCE USE
WARNING: Risk of re, explosion, electric shock or
damage to the appliance.
Use this appliance in a household only.
Do not change the specication of this appliance.
Do not sit or stand on the open door.
Please do not close the machine door with excessive
force
When the door or drawer of oven is open do not leave
anything on it, you may unbalance your appliance or
break the door.
The appliances are not intended to be operated by
means of an external timer or separate remote control
system.
The instructions for ovens that have shelves shall
include details indicating the correct installations of
the shelves.
TRANSPORT
Always move the appliance cautiously. Do not use
the machine door or the handle of oven, to lift the
appliance.
DECLARATION OF COMPLIANCE
When you have unpacked the oven, make sure that
it has not been damaged in any way. If you have any
doubts at all, do not use it: contact a professionally
qualied person. Keep packing materials such as
plastic bags, polystyrene, or nails out of the reach of
children because these are dangerous to children.
SAFETY HINTS
Do not use the oven unless you are wearing something on your feet. Do not touch the oven
with wet or damp hands or feet.
For oven: Oven door should not be opened often during the cooking period.
The appliance must be installed by an authorized technician and put into use. The producer is
not responsible for any damage that might be caused by defective placement, and installation
by unauthorized personnel.
When the door or drawer of oven is open do not leave anything on it, you may unbalance your
appliance or break the door.
Some parts of appliance may keep its heat for a long time; it is required to wait for it to cool
down before touching onto the points that are exposed to the heat directly.
If you will not use the appliance for a long time, it is advised to plug i off.
FITTING THE OVEN INTO THE KITCHEN UNIT
Fit the oven into the space provided in the kitchen unit; it may be fitted underneath a work top or into
an upright cupboard. Fix the oven in position by screwing into place, using the two fixing holes in the
frame. To locate the fixing holes, open the oven door and look inside. To allow adequate ventilation,
the measurements and distances adhered to when fixing the oven.
IMPORTANT
If the oven is to work properly, the kitchen housing must be suitable. The panels of the kitchen unit
that are next to the oven must be made of a heat resistant material. Ensure that the glues of units
that are made of veneered wood can withstand temperatures of at least 120 ºC. Plastics or glues
that cannot withstand such temperatures will melt and deform the unit, once the oven has been
lodged inside the units, electrical parts must be completely insulated. This is a legal safety
requirement. All guards must be firmly fixed into place so that it is impossible to remove them without
using special tools. Remove the back of the kitchen unit to ensure an adequate current of air
circulates around the oven. The hob must have a rear gap of at least 45 mm.
DECLARATION OF COMPLIANCE
When you have unpacked the oven, make sure that it has not been
damaged in any way. If you have any doubts at all, do not use it:
contact a professionally qualified person. Keep packing materials
such as plastic bags, polystyrene, or nails out of the reach of children
because these are dangerous to children.
t
5
4
Safety Instructions
CONDITIONS OF USE
This appliance is intended to be used in household
and similar applications such as farm houses or by
customers in serviced apartments, holiday apartments
and other residential type environments.
Obey the installation instruction supplied with the
appliance.
SAFETY INSTRUCTIONS
Before the installation and use of the appliance,
carefully read the supplied instructions.
The manufacturer is not responsible if an incorrect
installation and use causes injuries and damages.
Always keep the instructions with your appliance for
future reference.
Do not use the oven unless you are wearing something
on your feet. Do not touch the oven with wet or damp
hands or feet.
Some parts of appliance may keep its heat for a long
time; it is required to wait for it to cool down before
touching onto the points that are exposed to the
heat directly.
If you will not use the appliance for a long time, it is
advised to turn the plug o.
WARNING: To prevent any damages to your and
others’ life or property, you have to follow the safety
notes.
WARNING: Caution, risk of re!
CHILDREN & VULNERABLE PEOPLE SAFETY
WARNING: Risk of suocation, injury or permanent
disability.
This appliance can be used by children aged from
8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction for the operation of the appliance by a
person who is responsible for their safety.
Do not let children play with the appliance.
Keep all packaging away from children.
Keep all detergents away from children.
Keep children and pets away from the appliance door
when it is open.
Do not allow children to go near the oven when it is
operating, especially when the grill is on.
Cleaning and user maintenance shall not be made by
children without supervision.
BEFORE INSTALLATION
Remove all the packaging.
Do not install or use a damaged appliance.
When the oven is rst switched on, it may give o an
unpleasant smell. This is due to the bonding agent
used for the insulating panels within the oven. Please
run the new empty oven with the conventional cooking
function, 250 °C for 90 minutes to clean oil impurities
inside the cavity.
During the rst time use, it is completely normal
that the oven will show slight signs of smoke and
unpleasant odors. Please wait for the smell to clear
before putting food into the oven.
Please use this product under the open environment.
The appliance and its accessible parts become hot
during use. Care should be taken to avoid touching
heating elements.
If the surface is cracked, switch o the appliance to
avoid the possibility of electric shock.
During use, the appliance becomes very hot. Care
should be taken to avoid touching heating elements
inside the oven.
Ensure that the appliance is switched o before
replacing the oven lamp to avoid the possibility of
electric shock.
The means for disconnection must be incorporated
in the xed wiring in accordance with the wiring
specications.
Accessible parts may become hot during use.
An all-pole disconnection means must be incorporated
in the xed wiring in accordance with the wiring rules.
The appliance must be installed by an authorised
technician and put into use. The manufacturer is not
responsible for any damage that might be caused by
defective placement, and installation by unauthorised
personnel. Please contact 1300 11 HELP (4357) for
arrange an authorised technician.
5
ELECTRICAL CONNECTION
WARNING: Caution, risk of re and electrical shock!
The appliance must be earthed.
Make sure that the electrical information on the rating
plate agrees with the power supply. If not, contact an
electrician.
Always use a correctly installed shockproof socket.
Do not use multi-plug adapters and extension cables.
Make sure not to cause damage to the mains plug and
to the mains cable. Should the appliance power supply
cable need to be replaced, this must be carried out by
our Service Centre.
Connect the mains plug to the mains socket only at the
end of the installation. Make sure that there is access
to the mains plug after the installation. Do not connect
the appliance plug with a power connection board.
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
Do not touch the mains cable or the mains plug with
wet hands.
CARE & CLEANING
WARNING: Risk of injury or damage to the appliance.
Before maintenance, deactivate the appliance and
disconnect the mains plug.
Do not use a steam cleaner on the appliance.
Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering of
the glass.
PRODUCT DISPOSAL
Disconnect the appliance from the mains supply.
Cut o the mains cable and discard it.
Remove the door catch to prevent children and pets to
get closed in the appliance.
APPLIANCE USE
WARNING: Risk of re, explosion, electric shock or
damage to the appliance.
Use this appliance in a household only.
Do not change the specication of this appliance.
Do not sit or stand on the open door.
Please do not close the machine door with excessive
force
When the door or drawer of oven is open do not leave
anything on it, you may unbalance your appliance or
break the door.
The appliances are not intended to be operated by
means of an external timer or separate remote control
system.
The instructions for ovens that have shelves shall
include details indicating the correct installations of
the shelves.
TRANSPORT
Always move the appliance cautiously. Do not use
the machine door or the handle of oven, to lift the
appliance.
DECLARATION OF COMPLIANCE
When you have unpacked the oven, make sure that
it has not been damaged in any way. If you have any
doubts at all, do not use it: contact a professionally
qualied person. Keep packing materials such as
plastic bags, polystyrene, or nails out of the reach of
children because these are dangerous to children.
SAFETY HINTS
Do not use the oven unless you are wearing something on your feet. Do not touch the oven
with wet or damp hands or feet.
For oven: Oven door should not be opened often during the cooking period.
The appliance must be installed by an authorized technician and put into use. The producer is
not responsible for any damage that might be caused by defective placement, and installation
by unauthorized personnel.
When the door or drawer of oven is open do not leave anything on it, you may unbalance your
appliance or break the door.
Some parts of appliance may keep its heat for a long time; it is required to wait for it to cool
down before touching onto the points that are exposed to the heat directly.
If you will not use the appliance for a long time, it is advised to plug i off.
FITTING THE OVEN INTO THE KITCHEN UNIT
Fit the oven into the space provided in the kitchen unit; it may be fitted underneath a work top or into
an upright cupboard. Fix the oven in position by screwing into place, using the two fixing holes in the
frame. To locate the fixing holes, open the oven door and look inside. To allow adequate ventilation,
the measurements and distances adhered to when fixing the oven.
IMPORTANT
If the oven is to work properly, the kitchen housing must be suitable. The panels of the kitchen unit
that are next to the oven must be made of a heat resistant material. Ensure that the glues of units
that are made of veneered wood can withstand temperatures of at least 120 ºC. Plastics or glues
that cannot withstand such temperatures will melt and deform the unit, once the oven has been
lodged inside the units, electrical parts must be completely insulated. This is a legal safety
requirement. All guards must be firmly fixed into place so that it is impossible to remove them without
using special tools. Remove the back of the kitchen unit to ensure an adequate current of air
circulates around the oven. The hob must have a rear gap of at least 45 mm.
DECLARATION OF COMPLIANCE
When you have unpacked the oven, make sure that it has not been
damaged in any way. If you have any doubts at all, do not use it:
contact a professionally qualified person. Keep packing materials
such as plastic bags, polystyrene, or nails out of the reach of children
because these are dangerous to children.
t
5
6
Installation
Fit the oven into the space provided in the kitchen unit; it may be tted underneath a work top or into
an upright cupboard. Fix the oven in position by screwing into place, using the two xing holes in the
frame. To locate the xing holes, open the oven door and look inside. To allow adequate ventilation,
the measurements and distances adhered to when xing the oven.
If the oven is to work properly, the kitchen housing must be suitable. The panels of the kitchen unit
that are next to the oven must be made of a heat resistant material. Ensure that the glues of units
that are made of veneered wood can withstand temperatures of at least 120 °C. Plastics or glues that
cannot withstand such temperatures will melt and deform the unit, once the oven has been lodged
inside the units, electrical parts must be completely insulated. This is a legal safety requirement. All
guards must be rmly xed into place so that it is impossible to remove them without using special
tools. Remove the back of the kitchen unit to ensure an adequate current of air circulates around the
oven. The hob must have a rear gap of at least 45 mm.
7
Your Built-in Oven
USING YOUR BUILT-IN OVEN
Your oven is a re risk if the cooking time is not set or if the time is set too long. It is
important to keep close supervision when the oven is in operation.
Set functions by turning the function knob to desired option.
The oven will automatically start cooking after function, time and temperature are set.
To set the time of the cooking, press the Timer Function button and use the Increase and
Decrease Timer Control buttons to set your desired setting. After the cooking time is up,
the unit will make an audible sound as the oven stops.
Set the temperature by turning the temperature knob.
If the unit is not in use, always set the knobs to “0”.
CONTROL PANEL
FUNCTIONS
Symbol Function Description
Oven Lamp: Enables the user to observe the progress of cooking without
opening the door. Oven lamp will light for all cooking functions.
Defrost: The circulation of air at room temperature enables quicker thawing
of frozen food without the use of any heat. It’s a gentle but quick way to speed
up the defrosting time and thawing of ready-made dishes and cream lled
produce etc.
Grill: This cooking method is normal grilling, utilising the inner part only of the
top heating element, which directs heat downwards onto the food.
Max-Grill and Fan: The inner heating element and the outer heating element at
the top of the oven are working with fan. It is suitable for grilling large amount
of meat.
Convection: Warm air heated by the rear heater is evenly distributed
throughout the oven very fast by means of the fan. This results in a faster and
more economical cooking process. The convection allows food to be cooked
simultaneously on dierent shelves.
Function Knob Temperature KnobTimer Function
Decrease Timer Control Increase Timer Control
6
Installation
Fit the oven into the space provided in the kitchen unit; it may be tted underneath a work top or into
an upright cupboard. Fix the oven in position by screwing into place, using the two xing holes in the
frame. To locate the xing holes, open the oven door and look inside. To allow adequate ventilation,
the measurements and distances adhered to when xing the oven.
If the oven is to work properly, the kitchen housing must be suitable. The panels of the kitchen unit
that are next to the oven must be made of a heat resistant material. Ensure that the glues of units
that are made of veneered wood can withstand temperatures of at least 120 °C. Plastics or glues that
cannot withstand such temperatures will melt and deform the unit, once the oven has been lodged
inside the units, electrical parts must be completely insulated. This is a legal safety requirement. All
guards must be rmly xed into place so that it is impossible to remove them without using special
tools. Remove the back of the kitchen unit to ensure an adequate current of air circulates around the
oven. The hob must have a rear gap of at least 45 mm.
7
Your Built-in Oven
USING YOUR BUILT-IN OVEN
Your oven is a re risk if the cooking time is not set or if the time is set too long. It is
important to keep close supervision when the oven is in operation.
Set functions by turning the function knob to desired option.
The oven will automatically start cooking after function, time and temperature are set.
To set the time of the cooking, press the Timer Function button and use the Increase and
Decrease Timer Control buttons to set your desired setting. After the cooking time is up,
the unit will make an audible sound as the oven stops.
Set the temperature by turning the temperature knob.
If the unit is not in use, always set the knobs to “0”.
CONTROL PANEL
FUNCTIONS
Symbol Function Description
Oven Lamp: Enables the user to observe the progress of cooking without
opening the door. Oven lamp will light for all cooking functions.
Defrost: The circulation of air at room temperature enables quicker thawing
of frozen food without the use of any heat. It’s a gentle but quick way to speed
up the defrosting time and thawing of ready-made dishes and cream lled
produce etc.
Grill: This cooking method is normal grilling, utilising the inner part only of the
top heating element, which directs heat downwards onto the food.
Max-Grill and Fan: The inner heating element and the outer heating element at
the top of the oven are working with fan. It is suitable for grilling large amount
of meat.
Convection: Warm air heated by the rear heater is evenly distributed
throughout the oven very fast by means of the fan. This results in a faster and
more economical cooking process. The convection allows food to be cooked
simultaneously on dierent shelves.
Function Knob Temperature KnobTimer Function
Decrease Timer Control Increase Timer Control
8
Your Built-in Oven (Continued)
ACCESSORIES
Wire shelf
For grill, dishes, cake pan with items for roasting and grilling.
Slider bracket
For cooking larger size food, these shelf support rails on the right and left sides
of the oven can be removed, dishes and tray can be put on the oven oor, using
functions as Radiant grilling, Max-Grill with fan.
NOTE: When placing dishes on the oven oor, please DO NOT use functions
with bottom heater to prevent heat gathering at bottom.
(only for specic models)
Universal pan
For cooking large quantities of food such as moist cakes, pastries,
frozen food etc, or for collecting fat/spillage and meat juices.
Telescopic runner
Some models might with telescopic runners to facilitate the use of oven. These
telescopic runners and slider brackets could be disassembled by unscrewing
the screws used to x it. After disassembled, dishes and tray can be put on the
oven oor, using functions as Radiant grilling, Max-Grill with fan.
NOTE: When placing dishes on the oven oor, please DO NOT use functions
with bottom heater to prevent heat gathering at bottom.
(only for specic models)
ACCESSORIES
Wire shelf : For grill, dishes, cake pan with items for
roasting and grilling.
Universal pan: For cooking large quantities of food such
as moist cakes, pastries, frozen food etc, or for collecting
fat/spillage and meat juices.
Slider bracket : For cooking larger size food, these shelf
support rails on the right and left sides of the oven can
be removed, dishes and tray can be put on the oven
floor, using functions as Radiant grilling, Double grilling,
Double grill with fan.
NOTE: When placing dishes on the oven floor, please
DO NOT use functions with bottom heater to prevent
heat gathering at bottom.
(only for specific models)
Telescopic runner: Some models might with telescopic
runners to facilitate the use of oven. These telescopic
runners and slider brackets could be disassembled by
unscrewing the screws used to fix it. After disassembled,
dishes and tray can be put on the oven floor, using
funcstions as Radiant grilling, Double grilling, Double grill
with fan.
NOTE: When placing dishes on the oven floor, please
DO NOT use functions with bottom heater to prevent
heat gathering at bottom.
(only for specific models)
7
ACCESSORIES
Wire shelf : For grill, dishes, cake pan with items for
roasting and grilling.
Universal pan: For cooking large quantities of food such
as moist cakes, pastries, frozen food etc, or for collecting
fat/spillage and meat juices.
Slider bracket : For cooking larger size food, these shelf
support rails on the right and left sides of the oven can
be removed, dishes and tray can be put on the oven
floor, using functions as Radiant grilling, Double grilling,
Double grill with fan.
NOTE: When placing dishes on the oven floor, please
DO NOT use functions with bottom heater to prevent
heat gathering at bottom.
(only for specific models)
Telescopic runner: Some models might with telescopic
runners to facilitate the use of oven. These telescopic
runners and slider brackets could be disassembled by
unscrewing the screws used to fix it. After disassembled,
dishes and tray can be put on the oven floor, using
funcstions as Radiant grilling, Double grilling, Double grill
with fan.
NOTE: When placing dishes on the oven floor, please
DO NOT use functions with bottom heater to prevent
heat gathering at bottom.
(only for specific models)
7
ACCESSORIES
Wire shelf : For grill, dishes, cake pan with items for
roasting and grilling.
Universal pan: For cooking large quantities of food such
as moist cakes, pastries, frozen food etc, or for collecting
fat/spillage and meat juices.
Slider bracket : For cooking larger size food, these shelf
support rails on the right and left sides of the oven can
be removed, dishes and tray can be put on the oven
floor, using functions as Radiant grilling, Double grilling,
Double grill with fan.
NOTE: When placing dishes on the oven floor, please
DO NOT use functions with bottom heater to prevent
heat gathering at bottom.
(only for specific models)
Telescopic runner: Some models might with telescopic
runners to facilitate the use of oven. These telescopic
runners and slider brackets could be disassembled by
unscrewing the screws used to fix it. After disassembled,
dishes and tray can be put on the oven floor, using
funcstions as Radiant grilling, Double grilling, Double grill
with fan.
NOTE: When placing dishes on the oven floor, please
DO NOT use functions with bottom heater to prevent
heat gathering at bottom.
(only for specific models)
7
ACCESSORIES
Wire shelf : For grill, dishes, cake pan with items for
roasting and grilling.
Universal pan: For cooking large quantities of food such
as moist cakes, pastries, frozen food etc, or for collecting
fat/spillage and meat juices.
Slider bracket : For cooking larger size food, these shelf
support rails on the right and left sides of the oven can
be removed, dishes and tray can be put on the oven
floor, using functions as Radiant grilling, Double grilling,
Double grill with fan.
NOTE: When placing dishes on the oven floor, please
DO NOT use functions with bottom heater to prevent
heat gathering at bottom.
(only for specific models)
Telescopic runner: Some models might with telescopic
runners to facilitate the use of oven. These telescopic
runners and slider brackets could be disassembled by
unscrewing the screws used to fix it. After disassembled,
dishes and tray can be put on the oven floor, using
funcstions as Radiant grilling, Double grilling, Double grill
with fan.
NOTE: When placing dishes on the oven floor, please
DO NOT use functions with bottom heater to prevent
heat gathering at bottom.
(only for specific models)
7
9
SHELF PLACEMENT WARNING
To ensure the oven shelves operate safely, correct placement of the shelves
between the side rail is imperative. Shelves and the pan only can be used
between the rst and fth layers.
The shelves should be used with the right direction, it will ensure that during
careful removal of the shelf or tray, hot food items should not slide out.
BULB REPLACEMENT
For replacement, process as follows:
1. Disconnect power from the mains outlet or switch o the circuit breaker
of the units mains outlet.
2. Unscrew the glass lamp cover by turning it counter-clockwise (note, it may
be sti) and replace the bulb with a new one of the same type.
3. Screw the glass lamp cover back in place.
NOTE: Only use 25-40W/220V-240V, T300°C halogen lamps.
SECURING THE OVEN TO THE CABINET
1. Fit oven into the cabinet recess.
2. Open the oven door.
3. Secure the oven to the kitchen cabinet with two distance holders “A
which t the holes in the oven frame and t the two screws “B.
OR
8
BULB REPLACEMENT
For replacement, process as follows:
1> Disconnect power from the mains outlet or switch off the circuit breaker of the unit's mains outlet.
2> Unscrew the glass lamp cover by turning it counter-clockwise (note, it may be stiff) and replace
the bulb with a new one of the same type.
3> Screw the glass lamp cover back in place.
NOTE: Only use 25-40W/220V-240V, T300°C halogen lamps.
SHELF PLACEMENT WARNING:
SECURING THE OVEN TO THE CABINET
1. Fit oven into the cabinet recess.
2. Open the oven door.
3. Secure the oven to the kitchen cabinet with two
distance holders " A " which fit the holes in the
oven frame and fit the two screws " B ".
To ensure the oven shelves operate safely, correct placement of the shelves between the side rail
is imperative. Shelves and the pan only can be used between the first and fifth layers.
The shelves should be used with the right direction, it will ensure that during careful removal of the
shelf or tray, hot food items should not slide out.
OR
8
BULB REPLACEMENT
For replacement, process as follows:
1> Disconnect power from the mains outlet or switch off the circuit breaker of the unit's mains outlet.
2> Unscrew the glass lamp cover by turning it counter-clockwise (note, it may be stiff) and replace
the bulb with a new one of the same type.
3> Screw the glass lamp cover back in place.
NOTE: Only use 25-40W/220V-240V, T300°C halogen lamps.
SHELF PLACEMENT WARNING:
SECURING THE OVEN TO THE CABINET
1. Fit oven into the cabinet recess.
2. Open the oven door.
3. Secure the oven to the kitchen cabinet with two
distance holders " A " which fit the holes in the
oven frame and fit the two screws " B ".
To ensure the oven shelves operate safely, correct placement of the shelves between the side rail
is imperative. Shelves and the pan only can be used between the first and fifth layers.
The shelves should be used with the right direction, it will ensure that during careful removal of the
shelf or tray, hot food items should not slide out.
OR
8
8
Your Built-in Oven (Continued)
ACCESSORIES
Wire shelf
For grill, dishes, cake pan with items for roasting and grilling.
Slider bracket
For cooking larger size food, these shelf support rails on the right and left sides
of the oven can be removed, dishes and tray can be put on the oven oor, using
functions as Radiant grilling, Max-Grill with fan.
NOTE: When placing dishes on the oven oor, please DO NOT use functions
with bottom heater to prevent heat gathering at bottom.
(only for specic models)
Universal pan
For cooking large quantities of food such as moist cakes, pastries,
frozen food etc, or for collecting fat/spillage and meat juices.
Telescopic runner
Some models might with telescopic runners to facilitate the use of oven. These
telescopic runners and slider brackets could be disassembled by unscrewing
the screws used to x it. After disassembled, dishes and tray can be put on the
oven oor, using functions as Radiant grilling, Max-Grill with fan.
NOTE: When placing dishes on the oven oor, please DO NOT use functions
with bottom heater to prevent heat gathering at bottom.
(only for specic models)
ACCESSORIES
Wire shelf : For grill, dishes, cake pan with items for
roasting and grilling.
Universal pan: For cooking large quantities of food such
as moist cakes, pastries, frozen food etc, or for collecting
fat/spillage and meat juices.
Slider bracket : For cooking larger size food, these shelf
support rails on the right and left sides of the oven can
be removed, dishes and tray can be put on the oven
floor, using functions as Radiant grilling, Double grilling,
Double grill with fan.
NOTE: When placing dishes on the oven floor, please
DO NOT use functions with bottom heater to prevent
heat gathering at bottom.
(only for specific models)
Telescopic runner: Some models might with telescopic
runners to facilitate the use of oven. These telescopic
runners and slider brackets could be disassembled by
unscrewing the screws used to fix it. After disassembled,
dishes and tray can be put on the oven floor, using
funcstions as Radiant grilling, Double grilling, Double grill
with fan.
NOTE: When placing dishes on the oven floor, please
DO NOT use functions with bottom heater to prevent
heat gathering at bottom.
(only for specific models)
7
ACCESSORIES
Wire shelf : For grill, dishes, cake pan with items for
roasting and grilling.
Universal pan: For cooking large quantities of food such
as moist cakes, pastries, frozen food etc, or for collecting
fat/spillage and meat juices.
Slider bracket : For cooking larger size food, these shelf
support rails on the right and left sides of the oven can
be removed, dishes and tray can be put on the oven
floor, using functions as Radiant grilling, Double grilling,
Double grill with fan.
NOTE: When placing dishes on the oven floor, please
DO NOT use functions with bottom heater to prevent
heat gathering at bottom.
(only for specific models)
Telescopic runner: Some models might with telescopic
runners to facilitate the use of oven. These telescopic
runners and slider brackets could be disassembled by
unscrewing the screws used to fix it. After disassembled,
dishes and tray can be put on the oven floor, using
funcstions as Radiant grilling, Double grilling, Double grill
with fan.
NOTE: When placing dishes on the oven floor, please
DO NOT use functions with bottom heater to prevent
heat gathering at bottom.
(only for specific models)
7
ACCESSORIES
Wire shelf : For grill, dishes, cake pan with items for
roasting and grilling.
Universal pan: For cooking large quantities of food such
as moist cakes, pastries, frozen food etc, or for collecting
fat/spillage and meat juices.
Slider bracket : For cooking larger size food, these shelf
support rails on the right and left sides of the oven can
be removed, dishes and tray can be put on the oven
floor, using functions as Radiant grilling, Double grilling,
Double grill with fan.
NOTE: When placing dishes on the oven floor, please
DO NOT use functions with bottom heater to prevent
heat gathering at bottom.
(only for specific models)
Telescopic runner: Some models might with telescopic
runners to facilitate the use of oven. These telescopic
runners and slider brackets could be disassembled by
unscrewing the screws used to fix it. After disassembled,
dishes and tray can be put on the oven floor, using
funcstions as Radiant grilling, Double grilling, Double grill
with fan.
NOTE: When placing dishes on the oven floor, please
DO NOT use functions with bottom heater to prevent
heat gathering at bottom.
(only for specific models)
7
ACCESSORIES
Wire shelf : For grill, dishes, cake pan with items for
roasting and grilling.
Universal pan: For cooking large quantities of food such
as moist cakes, pastries, frozen food etc, or for collecting
fat/spillage and meat juices.
Slider bracket : For cooking larger size food, these shelf
support rails on the right and left sides of the oven can
be removed, dishes and tray can be put on the oven
floor, using functions as Radiant grilling, Double grilling,
Double grill with fan.
NOTE: When placing dishes on the oven floor, please
DO NOT use functions with bottom heater to prevent
heat gathering at bottom.
(only for specific models)
Telescopic runner: Some models might with telescopic
runners to facilitate the use of oven. These telescopic
runners and slider brackets could be disassembled by
unscrewing the screws used to fix it. After disassembled,
dishes and tray can be put on the oven floor, using
funcstions as Radiant grilling, Double grilling, Double grill
with fan.
NOTE: When placing dishes on the oven floor, please
DO NOT use functions with bottom heater to prevent
heat gathering at bottom.
(only for specific models)
7
9
SHELF PLACEMENT WARNING
To ensure the oven shelves operate safely, correct placement of the shelves
between the side rail is imperative. Shelves and the pan only can be used
between the rst and fth layers.
The shelves should be used with the right direction, it will ensure that during
careful removal of the shelf or tray, hot food items should not slide out.
BULB REPLACEMENT
For replacement, process as follows:
1. Disconnect power from the mains outlet or switch o the circuit breaker
of the units mains outlet.
2. Unscrew the glass lamp cover by turning it counter-clockwise (note, it may
be sti) and replace the bulb with a new one of the same type.
3. Screw the glass lamp cover back in place.
NOTE: Only use 25-40W/220V-240V, T300°C halogen lamps.
SECURING THE OVEN TO THE CABINET
1. Fit oven into the cabinet recess.
2. Open the oven door.
3. Secure the oven to the kitchen cabinet with two distance holders “A
which t the holes in the oven frame and t the two screws “B.
BULB REPLACEMENT
For replacement, process as follows:
1> Disconnect power from the mains outlet or switch off the circuit breaker of the unit's mains outlet.
2> Unscrew the glass lamp cover by turning it counter-clockwise (note, it may be stiff) and replace
the bulb with a new one of the same type.
3> Screw the glass lamp cover back in place.
NOTE: Only use 25-40W/220V-240V, T300°C halogen lamps.
SHELF PLACEMENT WARNING:
SECURING THE OVEN TO THE CABINET
1. Fit oven into the cabinet recess.
2. Open the oven door.
3. Secure the oven to the kitchen cabinet with two
distance holders " A " which fit the holes in the
oven frame and fit the two screws " B ".
To ensure the oven shelves operate safely, correct placement of the shelves between the side rail
is imperative. Shelves and the pan only can be used between the first and fifth layers.
The shelves should be used with the right direction, it will ensure that during careful removal of the
shelf or tray, hot food items should not slide out.
OR
8
BULB REPLACEMENT
For replacement, process as follows:
1> Disconnect power from the mains outlet or switch off the circuit breaker of the unit's mains outlet.
2> Unscrew the glass lamp cover by turning it counter-clockwise (note, it may be stiff) and replace
the bulb with a new one of the same type.
3> Screw the glass lamp cover back in place.
NOTE: Only use 25-40W/220V-240V, T300°C halogen lamps.
SHELF PLACEMENT WARNING:
SECURING THE OVEN TO THE CABINET
1. Fit oven into the cabinet recess.
2. Open the oven door.
3. Secure the oven to the kitchen cabinet with two
distance holders " A " which fit the holes in the
oven frame and fit the two screws " B ".
To ensure the oven shelves operate safely, correct placement of the shelves between the side rail
is imperative. Shelves and the pan only can be used between the first and fifth layers.
The shelves should be used with the right direction, it will ensure that during careful removal of the
shelf or tray, hot food items should not slide out.
OR
8
BULB REPLACEMENT
For replacement, process as follows:
1> Disconnect power from the mains outlet or switch off the circuit breaker of the unit's mains outlet.
2> Unscrew the glass lamp cover by turning it counter-clockwise (note, it may be stiff) and replace
the bulb with a new one of the same type.
3> Screw the glass lamp cover back in place.
NOTE: Only use 25-40W/220V-240V, T300°C halogen lamps.
SHELF PLACEMENT WARNING:
SECURING THE OVEN TO THE CABINET
1. Fit oven into the cabinet recess.
2. Open the oven door.
3. Secure the oven to the kitchen cabinet with two
distance holders " A " which fit the holes in the
oven frame and fit the two screws " B ".
To ensure the oven shelves operate safely, correct placement of the shelves between the side rail
is imperative. Shelves and the pan only can be used between the first and fifth layers.
The shelves should be used with the right direction, it will ensure that during careful removal of the
shelf or tray, hot food items should not slide out.
OR
8
10
Your Built-in Oven (Continued)
VENTILATING OPENINGS
When cooking is nished, if the temperature of ventilating openings is over
70 degrees, the cooling fan will continue working. The cooling fan will not stop
working until the temperature becomes lower than 60 degrees.
THE OVEN CONNECTION
INSTALLATION
NOTE: The number of accessories included depends on the particular appliance purchased.
INSTALLATION
570
min. 560
606
600
80
250
100
Remark:
1.Only plus deviations are admissible for all dimension.
2.The cabinet is not include the power switch or socket.
VENTILATING OPENINGS
CONNECTION OF THE OVEN
Ventilating openings
L
N
When cooking is finished, if the temperature of ventilating openings is over 70 degree, the cooling
fan will continue working. The cooling fan will not stop working until the temperature becomes
lower than 60 degree.
555
20
595
595
560
9
NOTE: The number of accessories included depends on the particular appliance purchased.
INSTALLATION
570
min. 560
606
600
80
250
100
Remark:
1.Only plus deviations are admissible for all dimension.
2.The cabinet is not include the power switch or socket.
VENTILATING OPENINGS
CONNECTION OF THE OVEN
Ventilating openings
L
N
When cooking is finished, if the temperature of ventilating openings is over 70 degree, the cooling
fan will continue working. The cooling fan will not stop working until the temperature becomes
lower than 60 degree.
555
20
595
595
560
9
NOTE: The number of accessories included depends on the particular appliance purchased.
INSTALLATION
570
min. 560
606
600
80
250
100
Remark:
1.Only plus deviations are admissible for all dimension.
2.The cabinet is not include the power switch or socket.
VENTILATING OPENINGS
CONNECTION OF THE OVEN
Ventilating openings
L
N
When cooking is finished, if the temperature of ventilating openings is over 70 degree, the cooling
fan will continue working. The cooling fan will not stop working until the temperature becomes
lower than 60 degree.
555
20
595
595
560
9
560
11
REMOVING THE DOOR FROM THE OVEN
Removable door allows full access to entire interior
of the oven for easier and quicker maintenance.
1. To remove the door, open the door to the maximum angle.
Then pull the buckle at the door hinge backward.
(Figure 1)
2. Close the door to an angle approximately 15°.
Lift up and slowly pull the door out from the oven.
(Figure 2)
3. Place the door atwise with door top cover towards yourself, put your
hands on the glass and pull it towards the oven.
(Figure 3)
4. Separate the glass carefully by lifting it approximately 25°.
(Figure 4)
5. Push the glass into the position indicated by the arrow in Figure 5.
Gently pull the glass out of the socket.
6. After pulling out the inner glass, please take out the middle layer glass.
(Figure 6)
7. When cleaning is completed, reverse the above procedures to return the
door to its original position.
REMOVING THE DOOR FROM OVEN (OPTIONAL)
Removable door allows full access to entire interior
of the oven for easier and quicker maintenance.
1.
2.
3.
4.
5.
6.
7.
To remove the door, open the door to the maximum angle.
Then pull the buckle at the door hinge backward.
(Figure 1)
Close the door to an angle approximately 15°.
Lift up and slowly pull the door out from the oven.
(Figure 2)
Place the door flatwise with door top cover towards yourself,
put your hands on the glass and pull it towards the oven.
(Figure 3)
Seperate the glass carefully by lifting it approximately 25°.
(Figure 4)
Push the glass into the position indicated by the arrow
in Figure 5. Gently pull the glass out of the socket.
After pulling out the inner glass, please take out
the middle layer glass as shown in Figure 6.
When cleaning is completed, reverse the above
procedures to return the door to its original position.
15˚
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Glass
Rubber
10
10
Your Built-in Oven (Continued)
VENTILATING OPENINGS
When cooking is nished, if the temperature of ventilating openings is over
70 degrees, the cooling fan will continue working. The cooling fan will not stop
working until the temperature becomes lower than 60 degrees.
THE OVEN CONNECTION
INSTALLATION
NOTE: The number of accessories included depends on the particular appliance purchased.
INSTALLATION
570
min. 560
606
600
80
250
100
Remark:
1.Only plus deviations are admissible for all dimension.
2.The cabinet is not include the power switch or socket.
VENTILATING OPENINGS
CONNECTION OF THE OVEN
Ventilating openings
L
N
When cooking is finished, if the temperature of ventilating openings is over 70 degree, the cooling
fan will continue working. The cooling fan will not stop working until the temperature becomes
lower than 60 degree.
555
20
595
595
560
9
NOTE: The number of accessories included depends on the particular appliance purchased.
INSTALLATION
570
min. 560
606
600
80
250
100
Remark:
1.Only plus deviations are admissible for all dimension.
2.The cabinet is not include the power switch or socket.
VENTILATING OPENINGS
CONNECTION OF THE OVEN
Ventilating openings
L
N
When cooking is finished, if the temperature of ventilating openings is over 70 degree, the cooling
fan will continue working. The cooling fan will not stop working until the temperature becomes
lower than 60 degree.
555
20
595
595
560
9
NOTE: The number of accessories included depends on the particular appliance purchased.
INSTALLATION
570
min. 560
606
600
80
250
100
Remark:
1.Only plus deviations are admissible for all dimension.
2.The cabinet is not include the power switch or socket.
VENTILATING OPENINGS
CONNECTION OF THE OVEN
Ventilating openings
L
N
When cooking is finished, if the temperature of ventilating openings is over 70 degree, the cooling
fan will continue working. The cooling fan will not stop working until the temperature becomes
lower than 60 degree.
555
20
595
595
560
9
560
11
REMOVING THE DOOR FROM THE OVEN
Removable door allows full access to entire interior
of the oven for easier and quicker maintenance.
1. To remove the door, open the door to the maximum angle.
Then pull the buckle at the door hinge backward.
(Figure 1)
2. Close the door to an angle approximately 15°.
Lift up and slowly pull the door out from the oven.
(Figure 2)
3. Place the door atwise with door top cover towards yourself, put your
hands on the glass and pull it towards the oven.
(Figure 3)
4. Separate the glass carefully by lifting it approximately 25°.
(Figure 4)
5. Push the glass into the position indicated by the arrow in Figure 5.
Gently pull the glass out of the socket.
6. After pulling out the inner glass, please take out the middle layer glass.
(Figure 6)
7. When cleaning is completed, reverse the above procedures to return the
door to its original position.
REMOVING THE DOOR FROM OVEN (OPTIONAL)
Removable door allows full access to entire interior
of the oven for easier and quicker maintenance.
1.
2.
3.
4.
5.
6.
7.
To remove the door, open the door to the maximum angle.
Then pull the buckle at the door hinge backward.
(Figure 1)
Close the door to an angle approximately 15°.
Lift up and slowly pull the door out from the oven.
(Figure 2)
Place the door flatwise with door top cover towards yourself,
put your hands on the glass and pull it towards the oven.
(Figure 3)
Seperate the glass carefully by lifting it approximately 25°.
(Figure 4)
Push the glass into the position indicated by the arrow
in Figure 5. Gently pull the glass out of the socket.
After pulling out the inner glass, please take out
the middle layer glass as shown in Figure 6.
When cleaning is completed, reverse the above
procedures to return the door to its original position.
15˚
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Glass
Rubber
10
12
Operation Instructions
When the oven is rst connected to the electrical supply, wait for the display to automatically show
“12.30”, a beep sound once and the “12” “.” ash. Ensure the correct time of the day is set before using
the oven.
NOTE: The clock is in 24 hour format. Time will be displayed for example, 2PM shown as 14.00.
SETTING THE CLOCK
1. Press the “+” and “-” buttons to adjust the hour setting.
2. Press the “ ” button to conrm the hour setting.
3. Press the “+” and “-” buttons to adjust the minute setting.
4. Press the “ ” button to conrm the minute setting and the timer will be in standby mode.
NOTE: If the display does not ash, adjust the time of day by pressing the “+” and “-” buttons at the
same time for more than 3 seconds.
OVEN ON AND OFF
If the timer is in standby mode press “ ” for more than 3 seconds, the timer will enter manual mode
and the symbol “ ” remain lit up.
1. Set the desired cooking function and the temperature degree.
If you set Dur or End , after cooking, the oven will automatically turn o.
If you set manual or minute minder, after cooking, bring the cooking function and oven
temperature knob to “0” position. Press “ ” and “+” buttons for more than 3 seconds to return
to standby mode.
TIME FUNCTION SETTING
In manual mode, pressing “ ” can enter the time function setting, the sequence of the function
setting is Manual mode - Minute minder-Dur-End-Manual mode. Then selected cooking function
and adjust the cook temperature if required.
Manual mode:
In manual mode, only the day’s time and the symbol “ ” lights up. The cooking duration has to be
controlled by the user.
NOTE:
In manual mode, to ensure the oven is not left on accidentally, after 5 hours and no buttons have
been pressed, the timer will ash once a second to warn you the oven will enter standby mode.
After a total of 10 hours, the timer will enter standby mode.
When the timer is ashing in manual mode, press to reset the timer if you intend to
continue using the oven. Or press “ ” and “ + ” together for more than 3 seconds to enter standby
mode if oven will not be used.
OPERATION INSTRUCTIONS
When the oven is first connected to the electrical supply, wait for the display automatically show " 12.30 ",
a beep sound once and the " 12 " " . " flash. Ensure the correct time of the day is set before using the
oven. please note: that is 24 hour clock, for example 2PM shown as 14.00.
To set the correct time of day
1> Press " + " " - " button to adjust the hour setting.
2> Press " " to confirm the hour setting.
3> Press " + " " - " button to adjust the minute setting.
4> Press " " to confirm the minute setting and the timer will be in standby mode.
If the display does not flash, adjust the time of day by pressing the " + " and " - " buttons at
the same time for more than 3 seconds.
Oven On and Off
If the timer is in standby modepress " " for more than 3 seconds, the timer will enter manual
mode and the symbol
Manual mode
:
In manual mode, only the day's time and the symbol " " lights up. The cooking duration has to
be controlled by the user.
Notes: In manual mode, to ensure the oven is not left on accidentally, after 5 hours no any button
pressed, the timer will flash once a second to warn you the oven will enter standby mode. After a
total of 10 hours, the timer will enter standby mode.
When the timer is flashing in manual mode, press any button to reset the timer if you intend to
" and " + " together for more than 3 seconds to enter standby
continue using the oven. Or press "
mode if oven will not be used.
" " will light up continuously .
Note:
Time function setting
1> Set the desired cooking function and the temperature degree.
2> Set the time function, then the oven will on.
If you set Dur or End , after cooking, the oven will automatically turn off.
If you set manual or minute minder, after cooking, bring the cooking function and oven temperature
knob to " 0 " position. Press "
" and " + " buttons for more than 3 seconds to return to standby mode.
In manual mode, pressing " " can enter the time function setting, the sequence of the function
setting is Mamual mode - Minute minder-Dur-End-Manual mode. Then selected cooking function
and adjust the cook temperature if required.
7
OPERATION INSTRUCTIONS
When the oven is first connected to the electrical supply, wait for the display automatically show " 12.30 ",
a beep sound once and the " 12 " " . " flash. Ensure the correct time of the day is set before using the
oven. please note: that is 24 hour clock, for example 2PM shown as 14.00.
To set the correct time of day
1> Press " + " " - " button to adjust the hour setting.
2> Press " " to confirm the hour setting.
3> Press " + " " - " button to adjust the minute setting.
4> Press " " to confirm the minute setting and the timer will be in standby mode.
If the display does not flash, adjust the time of day by pressing the " + " and " - " buttons at
the same time for more than 3 seconds.
Oven On and Off
If the timer is in standby modepress " " for more than 3 seconds, the timer will enter manual
mode and the symbol
Manual mode
:
In manual mode, only the day's time and the symbol " " lights up. The cooking duration has to
be controlled by the user.
Notes: In manual mode, to ensure the oven is not left on accidentally, after 5 hours no any button
pressed, the timer will flash once a second to warn you the oven will enter standby mode. After a
total of 10 hours, the timer will enter standby mode.
When the timer is flashing in manual mode, press any button to reset the timer if you intend to
" and " + " together for more than 3 seconds to enter standby
continue using the oven. Or press "
mode if oven will not be used.
" " will light up continuously .
Note:
Time function setting
1> Set the desired cooking function and the temperature degree.
2> Set the time function, then the oven will on.
If you set Dur or End , after cooking, the oven will automatically turn off.
If you set manual or minute minder, after cooking, bring the cooking function and oven temperature
knob to " 0 " position. Press "
" and " + " buttons for more than 3 seconds to return to standby mode.
In manual mode, pressing " " can enter the time function setting, the sequence of the function
setting is Mamual mode - Minute minder-Dur-End-Manual mode. Then selected cooking function
and adjust the cook temperature if required.
7
2. Set the time function, then the oven will turn on.
any button
13
AUDIBLE WARNING TIME ADJUSTMENT
This function can be used to receive audible warning at the completion of the adjusted time period.
1. Press “ ” button to select the minute minder function. The relevant “ ” “ . “ symbol will ash.
2. Use the “+” and “-” buttons to adjust minute minder (Refer to the instructions for setting
the correct time of day). Press “ ” button to conrm, the “ ” symbol will begin to light
continuously. When the “ ” symbol begins to light continuously, the audible warning time
adjustment is done.
3. When the time is up, the timer gives an audible warning and the “ ” symbol begins to ash on
the screen. Press any button less than 3 seconds, it will stop the audible warning and the “
symbol disappears on the screen. Audible warning time adjustment is for warning purposes only.
Press “ ” and “+” together for more than 3 seconds to enter standby mode if oven will not
be used.
SEMI-AUTOMATIC PROGRAMMING ACCORDING TO COOKING PERIOD
This function is used to cook in the desired time range, The food to be cooked are put into the oven.
The oven is adjustment to the desired cooking function and temperature degree.
The maximum setting of cooking period is 10 hours.
1. Press “ ” button until you see “Dur” on the timer screen (Before setting the cooking period).
2. Use the “+” and “-” buttons to adjust the cooking period for the food you wish to cook
(Refer to the instructions for setting the correct time of day). Press “ ” button to conrm, the
day’s time will appear on the screen and the symbols “A” “ ” will light on the screen. While
doing this the oven will also start to operate.
3. At the completion of the set duration, the timer will stop the oven and give an audible warning.
Also, the symbol “A” will begin to ash on the screen. After bringing the cooking function and
oven temperature knob to position. Pressing any button less than 3 sec, it will stop the audible
warning. Pressing “ ” for more than 3 seconds set the oven to Manual mode again to use
the oven.
SEMI-AUTOMATIC PROGRAMMING ACCORDING TO FINISHING TIME
This function is used to cook according to the desired nishing time.The food to be cooked is put
into the oven. The oven is adjusted to the desired cooking function and temperature degree.
1. Press “ ” button until you see “End” on the timer screen (Before setting the nished time).
2. Use the “+” and “-” buttons to adjust the nishing time. (Refer to the instructions for setting the
correct time of day).
3. Press “ ” button to conrm, the day’s time will appear on the screen and the symbols “A” “
will light on the screen. While doing this the oven will also start to operate.
4. At the completion of the set duration, the timer will stop the oven and give an audible warning.
Also, the symbol “A” will begin to ash on the screen. After bringing the cooking function and
oven temperature knob to “0” position. Pressing any button less than 3 seconds, it will stop the
audible warning. Pressing “ ” for more than 3 seconds set the oven to Manual mode again to
use the oven.
OPERATION INSTRUCTIONS
When the oven is first connected to the electrical supply, wait for the display automatically show " 12.30 ",
a beep sound once and the " 12 " " . " flash. Ensure the correct time of the day is set before using the
oven. please note: that is 24 hour clock, for example 2PM shown as 14.00.
To set the correct time of day
1> Press " + " " - " button to adjust the hour setting.
2> Press " " to confirm the hour setting.
3> Press " + " " - " button to adjust the minute setting.
4> Press " " to confirm the minute setting and the timer will be in standby mode.
If the display does not flash, adjust the time of day by pressing the " + " and " - " buttons at
the same time for more than 3 seconds.
Oven On and Off
If the timer is in standby modepress " " for more than 3 seconds, the timer will enter manual
mode and the symbol
Manual mode
:
In manual mode, only the day's time and the symbol " " lights up. The cooking duration has to
be controlled by the user.
Notes: In manual mode, to ensure the oven is not left on accidentally, after 5 hours no any button
pressed, the timer will flash once a second to warn you the oven will enter standby mode. After a
total of 10 hours, the timer will enter standby mode.
When the timer is flashing in manual mode, press any button to reset the timer if you intend to
" and " + " together for more than 3 seconds to enter standby
continue using the oven. Or press "
mode if oven will not be used.
" " will light up continuously .
Note:
Time function setting
1> Set the desired cooking function and the temperature degree.
2> Set the time function, then the oven will on.
If you set Dur or End , after cooking, the oven will automatically turn off.
If you set manual or minute minder, after cooking, bring the cooking function and oven temperature
knob to " 0 " position. Press "
" and " + " buttons for more than 3 seconds to return to standby mode.
In manual mode, pressing " " can enter the time function setting, the sequence of the function
setting is Mamual mode - Minute minder-Dur-End-Manual mode. Then selected cooking function
and adjust the cook temperature if required.
7
OPERATION INSTRUCTIONS
When the oven is first connected to the electrical supply, wait for the display automatically show " 12.30 ",
a beep sound once and the " 12 " " . " flash. Ensure the correct time of the day is set before using the
oven. please note: that is 24 hour clock, for example 2PM shown as 14.00.
To set the correct time of day
1> Press " + " " - " button to adjust the hour setting.
2> Press " " to confirm the hour setting.
3> Press " + " " - " button to adjust the minute setting.
4> Press " " to confirm the minute setting and the timer will be in standby mode.
If the display does not flash, adjust the time of day by pressing the " + " and " - " buttons at
the same time for more than 3 seconds.
Oven On and Off
If the timer is in standby modepress " " for more than 3 seconds, the timer will enter manual
mode and the symbol
Manual mode
:
In manual mode, only the day's time and the symbol " " lights up. The cooking duration has to
be controlled by the user.
Notes: In manual mode, to ensure the oven is not left on accidentally, after 5 hours no any button
pressed, the timer will flash once a second to warn you the oven will enter standby mode. After a
total of 10 hours, the timer will enter standby mode.
When the timer is flashing in manual mode, press any button to reset the timer if you intend to
" and " + " together for more than 3 seconds to enter standby
continue using the oven. Or press "
mode if oven will not be used.
" " will light up continuously .
Note:
Time function setting
1> Set the desired cooking function and the temperature degree.
2> Set the time function, then the oven will on.
If you set Dur or End , after cooking, the oven will automatically turn off.
If you set manual or minute minder, after cooking, bring the cooking function and oven temperature
knob to " 0 " position. Press "
" and " + " buttons for more than 3 seconds to return to standby mode.
In manual mode, pressing " " can enter the time function setting, the sequence of the function
setting is Mamual mode - Minute minder-Dur-End-Manual mode. Then selected cooking function
and adjust the cook temperature if required.
7
Audible warning time adjustment:
3> , .,At the completion of the set duration the timer will stop the oven and give an audible warning Also the
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
" 0 ".,
Semi automatic programming accroding to finishing time-:
Semi automatic programming according to cooking period-:
This function is used to cook in the desired time range The food to be cooked are put into the oven,.
The oven is adjustment to the desired cooking function and temperature degree.
1> " " "" .( .)Press button until you see Dur on the timer screen Before setting cooking period
2> " + " " - " .(Use button to adjust cooking period for the food you wish to cook Refer to the instructions for
settingthecorrecttimeofday. ),' appear on the
screen and the symbols A will light on the screen While doing this the oven will
. , also start
to operate.
This function can be used to receive audible warning at the completion of the ajusted time period.
1> " " . " "" " .Press button to select the minute minder function The relevant symbol will flash
.
2> .(Use button to adjust minute minder Refer to the instructions for setting the correct time
the "" symbol begins to light continuously, the audible warning time adjustment is done.
3> When the time is up, the timer gives an audible warning and the " " symbol begins to flash on the
i
t will stop the audible warning and the symbol
.""
disappears on the screen Audible warning time adjustment is for warning purposes only..
Press "
of day.)
screen
button less than 3 seconds,
Press ""
and "+"together for more than 3 seconds to enter standby mode if oven will not be used
.
The maximum setting of cooking period is 10 hours.
Press ""
button to confirm the day s time will
to position it will stop the audible warning.
knob button less than 3 seconds
Pressing any
Pressing
for more than 3 seconds set the oven to Manual mode again to use the oven.
""
Press any
" " " "
" button to confirm, the " " symbol will begin to light continuously. When
"+""-"
This function is used to cook according to the desired finishing time The food to be cooked is put into.
the oven The oven is adjusted to the desired cooking function and temperature degree. .
1> " " "" .( ).Press button until you see End on the timer screen Before setting finished time
2> .( .)Use button to adjust finishing time Refer to the instructions for setting the correct time of day
3> the symbols A
will light on the screen While doing this the oven will also start to operate
" "" "
. , .
Press ""
button to confirm,
the day 's time will appear on the screen and
,.,At the completion of the set duration the timer will stop the oven and give an audible warning Also
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
4>
button less than 3 seconds, Pressing any it will stop the audible warning.
Pressing
""
for more than 3 seconds set the oven to Manual mode again to use the oven.
knobto position
" 0 "
" + " " - "
the
8
Audible warning time adjustment:
3> , .,At the completion of the set duration the timer will stop the oven and give an audible warning Also the
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
" 0 ".,
Semi automatic programming accroding to finishing time-:
Semi automatic programming according to cooking period-:
This function is used to cook in the desired time range The food to be cooked are put into the oven,.
The oven is adjustment to the desired cooking function and temperature degree.
1> " " "" .( .)Press button until you see Dur on the timer screen Before setting cooking period
2> " + " " - " .(Use button to adjust cooking period for the food you wish to cook Refer to the instructions for
settingthecorrecttimeofday. ),' appear on the
screen and the symbols A will light on the screen While doing this the oven will
. , also start
to operate.
This function can be used to receive audible warning at the completion of the ajusted time period.
1> " " . " "" " .Press button to select the minute minder function The relevant symbol will flash
.
2> .(Use button to adjust minute minder Refer to the instructions for setting the correct time
the "" symbol begins to light continuously, the audible warning time adjustment is done.
3> When the time is up, the timer gives an audible warning and the " " symbol begins to flash on the
i
t will stop the audible warning and the symbol
.""
disappears on the screen Audible warning time adjustment is for warning purposes only..
Press "
of day.)
screen
button less than 3 seconds,
Press ""
and "+"together for more than 3 seconds to enter standby mode if oven will not be used
.
The maximum setting of cooking period is 10 hours.
Press ""
button to confirm the day s time will
to position it will stop the audible warning.
knob button less than 3 seconds
Pressing any
Pressing
for more than 3 seconds set the oven to Manual mode again to use the oven.
""
Press any
" " " "
" button to confirm, the " " symbol will begin to light continuously. When
"+""-"
This function is used to cook according to the desired finishing time The food to be cooked is put into.
the oven The oven is adjusted to the desired cooking function and temperature degree. .
1> " " "" .( ).Press button until you see End on the timer screen Before setting finished time
2> .( .)Use button to adjust finishing time Refer to the instructions for setting the correct time of day
3> the symbols A
will light on the screen While doing this the oven will also start to operate
" "" "
. , .
Press ""
button to confirm,
the day 's time will appear on the screen and
,.,At the completion of the set duration the timer will stop the oven and give an audible warning Also
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
4>
button less than 3 seconds, Pressing any it will stop the audible warning.
Pressing
""
for more than 3 seconds set the oven to Manual mode again to use the oven.
knobto position
" 0 "
" + " " - "
the
8
Audible warning time adjustment:
3> , .,At the completion of the set duration the timer will stop the oven and give an audible warning Also the
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
" 0 ".,
Semi automatic programming accroding to finishing time-:
Semi automatic programming according to cooking period-:
This function is used to cook in the desired time range The food to be cooked are put into the oven,.
The oven is adjustment to the desired cooking function and temperature degree.
1> " " "" .( .)Press button until you see Dur on the timer screen Before setting cooking period
2> " + " " - " .(Use button to adjust cooking period for the food you wish to cook Refer to the instructions for
settingthecorrecttimeofday. ),' appear on the
screen and the symbols A will light on the screen While doing this the oven will
. , also start
to operate.
This function can be used to receive audible warning at the completion of the ajusted time period.
1> " " . " "" " .Press button to select the minute minder function The relevant symbol will flash
.
2> .(Use button to adjust minute minder Refer to the instructions for setting the correct time
the "" symbol begins to light continuously, the audible warning time adjustment is done.
3> When the time is up, the timer gives an audible warning and the " " symbol begins to flash on the
i
t will stop the audible warning and the symbol
.""
disappears on the screen Audible warning time adjustment is for warning purposes only..
Press "
of day.)
screen
button less than 3 seconds,
Press ""
and "+"together for more than 3 seconds to enter standby mode if oven will not be used
.
The maximum setting of cooking period is 10 hours.
Press ""
button to confirm the day s time will
to position it will stop the audible warning.
knob button less than 3 seconds
Pressing any
Pressing
for more than 3 seconds set the oven to Manual mode again to use the oven.
""
Press any
" " " "
" button to confirm, the " " symbol will begin to light continuously. When
"+""-"
This function is used to cook according to the desired finishing time The food to be cooked is put into.
the oven The oven is adjusted to the desired cooking function and temperature degree. .
1> " " "" .( ).Press button until you see End on the timer screen Before setting finished time
2> .( .)Use button to adjust finishing time Refer to the instructions for setting the correct time of day
3> the symbols A
will light on the screen While doing this the oven will also start to operate
" "" "
. , .
Press ""
button to confirm,
the day 's time will appear on the screen and
,.,At the completion of the set duration the timer will stop the oven and give an audible warning Also
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
4>
button less than 3 seconds, Pressing any it will stop the audible warning.
Pressing
""
for more than 3 seconds set the oven to Manual mode again to use the oven.
knobto position
" 0 "
" + " " - "
the
8
Audible warning time adjustment:
3> , .,At the completion of the set duration the timer will stop the oven and give an audible warning Also the
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
" 0 ".,
Semi automatic programming accroding to finishing time-:
Semi automatic programming according to cooking period-:
This function is used to cook in the desired time range The food to be cooked are put into the oven,.
The oven is adjustment to the desired cooking function and temperature degree.
1> " " "" .( .)Press button until you see Dur on the timer screen Before setting cooking period
2> " + " " - " .(Use button to adjust cooking period for the food you wish to cook Refer to the instructions for
settingthecorrecttimeofday. ),' appear on the
screen and the symbols A will light on the screen While doing this the oven will
. , also start
to operate.
This function can be used to receive audible warning at the completion of the ajusted time period.
1> " " . " "" " .Press button to select the minute minder function The relevant symbol will flash
.
2> .(Use button to adjust minute minder Refer to the instructions for setting the correct time
the "" symbol begins to light continuously, the audible warning time adjustment is done.
3> When the time is up, the timer gives an audible warning and the " " symbol begins to flash on the
i
t will stop the audible warning and the symbol
.""
disappears on the screen Audible warning time adjustment is for warning purposes only..
Press "
of day.)
screen
button less than 3 seconds,
Press ""
and "+"together for more than 3 seconds to enter standby mode if oven will not be used
.
The maximum setting of cooking period is 10 hours.
Press ""
button to confirm the day s time will
to position it will stop the audible warning.
knob button less than 3 seconds
Pressing any
Pressing
for more than 3 seconds set the oven to Manual mode again to use the oven.
""
Press any
" " " "
" button to confirm, the " " symbol will begin to light continuously. When
"+""-"
This function is used to cook according to the desired finishing time The food to be cooked is put into.
the oven The oven is adjusted to the desired cooking function and temperature degree. .
1> " " "" .( ).Press button until you see End on the timer screen Before setting finished time
2> .( .)Use button to adjust finishing time Refer to the instructions for setting the correct time of day
3> the symbols A
will light on the screen While doing this the oven will also start to operate
" "" "
. , .
Press ""
button to confirm,
the day 's time will appear on the screen and
,.,At the completion of the set duration the timer will stop the oven and give an audible warning Also
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
4>
button less than 3 seconds, Pressing any it will stop the audible warning.
Pressing
""
for more than 3 seconds set the oven to Manual mode again to use the oven.
knobto position
" 0 "
" + " " - "
the
8
Audible warning time adjustment:
3> , .,At the completion of the set duration the timer will stop the oven and give an audible warning Also the
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
" 0 ".,
Semi automatic programming accroding to finishing time-:
Semi automatic programming according to cooking period-:
This function is used to cook in the desired time range The food to be cooked are put into the oven,.
The oven is adjustment to the desired cooking function and temperature degree.
1> " " "" .( .)Press button until you see Dur on the timer screen Before setting cooking period
2> " + " " - " .(Use button to adjust cooking period for the food you wish to cook Refer to the instructions for
settingthecorrecttimeofday. ),' appear on the
screen and the symbols A will light on the screen While doing this the oven will
. , also start
to operate.
This function can be used to receive audible warning at the completion of the ajusted time period.
1> " " . " "" " .Press button to select the minute minder function The relevant symbol will flash
.
2> .(Use button to adjust minute minder Refer to the instructions for setting the correct time
the "" symbol begins to light continuously, the audible warning time adjustment is done.
3> When the time is up, the timer gives an audible warning and the " " symbol begins to flash on the
i
t will stop the audible warning and the symbol
.""
disappears on the screen Audible warning time adjustment is for warning purposes only..
Press "
of day.)
screen
button less than 3 seconds,
Press ""
and "+"together for more than 3 seconds to enter standby mode if oven will not be used
.
The maximum setting of cooking period is 10 hours.
Press ""
button to confirm the day s time will
to position it will stop the audible warning.
knob button less than 3 seconds
Pressing any
Pressing
for more than 3 seconds set the oven to Manual mode again to use the oven.
""
Press any
" " " "
" button to confirm, the " " symbol will begin to light continuously. When
"+""-"
This function is used to cook according to the desired finishing time The food to be cooked is put into.
the oven The oven is adjusted to the desired cooking function and temperature degree. .
1> " " "" .( ).Press button until you see End on the timer screen Before setting finished time
2> .( .)Use button to adjust finishing time Refer to the instructions for setting the correct ti""me of day
3> the symbols A
will light on the screen While doing this the oven will also start to operate
" "" "
. , .
Press ""
button to confirm,
the day 's time will appear on the screen and
,.,At the completion of the set duration the timer will stop the oven and give an audible warning Also
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
4>
button less than 3 seconds, Pressing any it will stop the audible warning.
Pressing
""
for more than 3 seconds set the oven to Manual mode again to use the oven.
knobto position
" 0 "
" + " " - "
the
8
12
Operation Instructions
When the oven is rst connected to the electrical supply, wait for the display to automatically show
“12.30”, a beep sound once and the “12” “.” ash. Ensure the correct time of the day is set before using
the oven.
NOTE: The clock is in 24 hour format. Time will be displayed for example, 2PM shown as 14.00.
SETTING THE CLOCK
1. Press the “+” and “-” buttons to adjust the hour setting.
2. Press the “ ” button to conrm the hour setting.
3. Press the “+” and “-” buttons to adjust the minute setting.
4. Press the “ ” button to conrm the minute setting and the timer will be in standby mode.
NOTE: If the display does not ash, adjust the time of day by pressing the “+” and “-” buttons at the
same time for more than 3 seconds.
OVEN ON AND OFF
If the timer is in standby mode press “ ” for more than 3 seconds, the timer will enter manual mode
and the symbol “ ” remain lit up.
1. Set the desired cooking function and the temperature degree.
If you set Dur or End , after cooking, the oven will automatically turn o.
If you set manual or minute minder, after cooking, bring the cooking function and oven
temperature knob to “0” position. Press “ ” and “+” buttons for more than 3 seconds to return
to standby mode.
TIME FUNCTION SETTING
In manual mode, pressing “ ” can enter the time function setting, the sequence of the function
setting is Manual mode - Minute minder-Dur-End-Manual mode. Then selected cooking function
and adjust the cook temperature if required.
Manual mode:
In manual mode, only the day’s time and the symbol “ ” lights up. The cooking duration has to be
controlled by the user.
NOTE:
In manual mode, to ensure the oven is not left on accidentally, after 5 hours and no buttons have
been pressed, the timer will ash once a second to warn you the oven will enter standby mode.
After a total of 10 hours, the timer will enter standby mode.
When the timer is ashing in manual mode, press to reset the timer if you intend to
continue using the oven. Or press “ ” and “ + ” together for more than 3 seconds to enter standby
mode if oven will not be used.
OPERATION INSTRUCTIONS
When the oven is first connected to the electrical supply, wait for the display automatically show " 12.30 ",
a beep sound once and the " 12 " " . " flash. Ensure the correct time of the day is set before using the
oven. please note: that is 24 hour clock, for example 2PM shown as 14.00.
To set the correct time of day
1> Press " + " " - " button to adjust the hour setting.
2> Press " " to confirm the hour setting.
3> Press " + " " - " button to adjust the minute setting.
4> Press " " to confirm the minute setting and the timer will be in standby mode.
If the display does not flash, adjust the time of day by pressing the " + " and " - " buttons at
the same time for more than 3 seconds.
Oven On and Off
If the timer is in standby modepress " " for more than 3 seconds, the timer will enter manual
mode and the symbol
Manual mode
:
In manual mode, only the day's time and the symbol " " lights up. The cooking duration has to
be controlled by the user.
Notes: In manual mode, to ensure the oven is not left on accidentally, after 5 hours no any button
pressed, the timer will flash once a second to warn you the oven will enter standby mode. After a
total of 10 hours, the timer will enter standby mode.
When the timer is flashing in manual mode, press any button to reset the timer if you intend to
" and " + " together for more than 3 seconds to enter standby
continue using the oven. Or press "
mode if oven will not be used.
" " will light up continuously .
Note:
Time function setting
1> Set the desired cooking function and the temperature degree.
2> Set the time function, then the oven will on.
If you set Dur or End , after cooking, the oven will automatically turn off.
If you set manual or minute minder, after cooking, bring the cooking function and oven temperature
knob to " 0 " position. Press "
" and " + " buttons for more than 3 seconds to return to standby mode.
In manual mode, pressing " " can enter the time function setting, the sequence of the function
setting is Mamual mode - Minute minder-Dur-End-Manual mode. Then selected cooking function
and adjust the cook temperature if required.
7
OPERATION INSTRUCTIONS
When the oven is first connected to the electrical supply, wait for the display automatically show " 12.30 ",
a beep sound once and the " 12 " " . " flash. Ensure the correct time of the day is set before using the
oven. please note: that is 24 hour clock, for example 2PM shown as 14.00.
To set the correct time of day
1> Press " + " " - " button to adjust the hour setting.
2> Press " " to confirm the hour setting.
3> Press " + " " - " button to adjust the minute setting.
4> Press " " to confirm the minute setting and the timer will be in standby mode.
If the display does not flash, adjust the time of day by pressing the " + " and " - " buttons at
the same time for more than 3 seconds.
Oven On and Off
If the timer is in standby modepress " " for more than 3 seconds, the timer will enter manual
mode and the symbol
Manual mode
:
In manual mode, only the day's time and the symbol " " lights up. The cooking duration has to
be controlled by the user.
Notes: In manual mode, to ensure the oven is not left on accidentally, after 5 hours no any button
pressed, the timer will flash once a second to warn you the oven will enter standby mode. After a
total of 10 hours, the timer will enter standby mode.
When the timer is flashing in manual mode, press any button to reset the timer if you intend to
" and " + " together for more than 3 seconds to enter standby
continue using the oven. Or press "
mode if oven will not be used.
" " will light up continuously .
Note:
Time function setting
1> Set the desired cooking function and the temperature degree.
2> Set the time function, then the oven will on.
If you set Dur or End , after cooking, the oven will automatically turn off.
If you set manual or minute minder, after cooking, bring the cooking function and oven temperature
knob to " 0 " position. Press "
" and " + " buttons for more than 3 seconds to return to standby mode.
In manual mode, pressing " " can enter the time function setting, the sequence of the function
setting is Mamual mode - Minute minder-Dur-End-Manual mode. Then selected cooking function
and adjust the cook temperature if required.
7
2. Set the time function, then the oven will turn on.
any button
13
AUDIBLE WARNING TIME ADJUSTMENT
This function can be used to receive audible warning at the completion of the adjusted time period.
1. Press “ ” button to select the minute minder function. The relevant “ ” “ . “ symbol will ash.
2. Use the “+” and “-” buttons to adjust minute minder (Refer to the instructions for setting
the correct time of day). Press “ ” button to conrm, the “ ” symbol will begin to light
continuously. When the “ ” symbol begins to light continuously, the audible warning time
adjustment is done.
3. When the time is up, the timer gives an audible warning and the “ ” symbol begins to ash on
the screen. Press any button less than 3 seconds, it will stop the audible warning and the “
symbol disappears on the screen. Audible warning time adjustment is for warning purposes only.
Press “ ” and “+” together for more than 3 seconds to enter standby mode if oven will not
be used.
SEMI-AUTOMATIC PROGRAMMING ACCORDING TO COOKING PERIOD
This function is used to cook in the desired time range, The food to be cooked are put into the oven.
The oven is adjustment to the desired cooking function and temperature degree.
The maximum setting of cooking period is 10 hours.
1. Press “ ” button until you see “Dur” on the timer screen (Before setting the cooking period).
2. Use the “+” and “-” buttons to adjust the cooking period for the food you wish to cook
(Refer to the instructions for setting the correct time of day). Press “ ” button to conrm, the
day’s time will appear on the screen and the symbols “A” “ ” will light on the screen. While
doing this the oven will also start to operate.
3. At the completion of the set duration, the timer will stop the oven and give an audible warning.
Also, the symbol “A” will begin to ash on the screen. After bringing the cooking function and
oven temperature knob to position. Pressing any button less than 3 sec, it will stop the audible
warning. Pressing “ ” for more than 3 seconds set the oven to Manual mode again to use
the oven.
SEMI-AUTOMATIC PROGRAMMING ACCORDING TO FINISHING TIME
This function is used to cook according to the desired nishing time.The food to be cooked is put
into the oven. The oven is adjusted to the desired cooking function and temperature degree.
1. Press “ ” button until you see “End” on the timer screen (Before setting the nished time).
2. Use the “+” and “-” buttons to adjust the nishing time. (Refer to the instructions for setting the
correct time of day).
3. Press “ ” button to conrm, the day’s time will appear on the screen and the symbols “A” “
will light on the screen. While doing this the oven will also start to operate.
4. At the completion of the set duration, the timer will stop the oven and give an audible warning.
Also, the symbol “A” will begin to ash on the screen. After bringing the cooking function and
oven temperature knob to “0” position. Pressing any button less than 3 seconds, it will stop the
audible warning. Pressing “ ” for more than 3 seconds set the oven to Manual mode again to
use the oven.
OPERATION INSTRUCTIONS
When the oven is first connected to the electrical supply, wait for the display automatically show " 12.30 ",
a beep sound once and the " 12 " " . " flash. Ensure the correct time of the day is set before using the
oven. please note: that is 24 hour clock, for example 2PM shown as 14.00.
To set the correct time of day
1> Press " + " " - " button to adjust the hour setting.
2> Press " " to confirm the hour setting.
3> Press " + " " - " button to adjust the minute setting.
4> Press " " to confirm the minute setting and the timer will be in standby mode.
If the display does not flash, adjust the time of day by pressing the " + " and " - " buttons at
the same time for more than 3 seconds.
Oven On and Off
If the timer is in standby modepress " " for more than 3 seconds, the timer will enter manual
mode and the symbol
Manual mode
:
In manual mode, only the day's time and the symbol " " lights up. The cooking duration has to
be controlled by the user.
Notes: In manual mode, to ensure the oven is not left on accidentally, after 5 hours no any button
pressed, the timer will flash once a second to warn you the oven will enter standby mode. After a
total of 10 hours, the timer will enter standby mode.
When the timer is flashing in manual mode, press any button to reset the timer if you intend to
" and " + " together for more than 3 seconds to enter standby
continue using the oven. Or press "
mode if oven will not be used.
" " will light up continuously .
Note:
Time function setting
1> Set the desired cooking function and the temperature degree.
2> Set the time function, then the oven will on.
If you set Dur or End , after cooking, the oven will automatically turn off.
If you set manual or minute minder, after cooking, bring the cooking function and oven temperature
knob to " 0 " position. Press "
" and " + " buttons for more than 3 seconds to return to standby mode.
In manual mode, pressing " " can enter the time function setting, the sequence of the function
setting is Mamual mode - Minute minder-Dur-End-Manual mode. Then selected cooking function
and adjust the cook temperature if required.
7
OPERATION INSTRUCTIONS
When the oven is first connected to the electrical supply, wait for the display automatically show " 12.30 ",
a beep sound once and the " 12 " " . " flash. Ensure the correct time of the day is set before using the
oven. please note: that is 24 hour clock, for example 2PM shown as 14.00.
To set the correct time of day
1> Press " + " " - " button to adjust the hour setting.
2> Press " " to confirm the hour setting.
3> Press " + " " - " button to adjust the minute setting.
4> Press " " to confirm the minute setting and the timer will be in standby mode.
If the display does not flash, adjust the time of day by pressing the " + " and " - " buttons at
the same time for more than 3 seconds.
Oven On and Off
If the timer is in standby modepress " " for more than 3 seconds, the timer will enter manual
mode and the symbol
Manual mode
:
In manual mode, only the day's time and the symbol " " lights up. The cooking duration has to
be controlled by the user.
Notes: In manual mode, to ensure the oven is not left on accidentally, after 5 hours no any button
pressed, the timer will flash once a second to warn you the oven will enter standby mode. After a
total of 10 hours, the timer will enter standby mode.
When the timer is flashing in manual mode, press any button to reset the timer if you intend to
" and " + " together for more than 3 seconds to enter standby
continue using the oven. Or press "
mode if oven will not be used.
" " will light up continuously .
Note:
Time function setting
1> Set the desired cooking function and the temperature degree.
2> Set the time function, then the oven will on.
If you set Dur or End , after cooking, the oven will automatically turn off.
If you set manual or minute minder, after cooking, bring the cooking function and oven temperature
knob to " 0 " position. Press "
" and " + " buttons for more than 3 seconds to return to standby mode.
In manual mode, pressing " " can enter the time function setting, the sequence of the function
setting is Mamual mode - Minute minder-Dur-End-Manual mode. Then selected cooking function
and adjust the cook temperature if required.
7
Audible warning time adjustment:
3> , .,At the completion of the set duration the timer will stop the oven and give an audible warning Also the
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
" 0 ".,
Semi automatic programming accroding to finishing time-:
Semi automatic programming according to cooking period-:
This function is used to cook in the desired time range The food to be cooked are put into the oven,.
The oven is adjustment to the desired cooking function and temperature degree.
1> " " "" .( .)Press button until you see Dur on the timer screen Before setting cooking period
2> " + " " - " .(Use button to adjust cooking period for the food you wish to cook Refer to the instructions for
settingthecorrecttimeofday. ),' appear on the
screen and the symbols A will light on the screen While doing this the oven will
. , also start
to operate.
This function can be used to receive audible warning at the completion of the ajusted time period.
1> " " . " "" " .Press button to select the minute minder function The relevant symbol will flash
.
2> .(Use button to adjust minute minder Refer to the instructions for setting the correct time
the "" symbol begins to light continuously, the audible warning time adjustment is done.
3> When the time is up, the timer gives an audible warning and the " " symbol begins to flash on the
i
t will stop the audible warning and the symbol
.""
disappears on the screen Audible warning time adjustment is for warning purposes only..
Press "
of day.)
screen
button less than 3 seconds,
Press ""
and "+"together for more than 3 seconds to enter standby mode if oven will not be used
.
The maximum setting of cooking period is 10 hours.
Press ""
button to confirm the day s time will
to position it will stop the audible warning.
knob button less than 3 seconds
Pressing any
Pressing
for more than 3 seconds set the oven to Manual mode again to use the oven.
""
Press any
" " " "
" button to confirm, the " " symbol will begin to light continuously. When
"+""-"
This function is used to cook according to the desired finishing time The food to be cooked is put into.
the oven The oven is adjusted to the desired cooking function and temperature degree. .
1> " " "" .( ).Press button until you see End on the timer screen Before setting finished time
2> .( .)Use button to adjust finishing time Refer to the instructions for setting the correct time of day
3> the symbols A
will light on the screen While doing this the oven will also start to operate
" "" "
. , .
Press ""
button to confirm,
the day 's time will appear on the screen and
,.,At the completion of the set duration the timer will stop the oven and give an audible warning Also
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
4>
button less than 3 seconds, Pressing any it will stop the audible warning.
Pressing
""
for more than 3 seconds set the oven to Manual mode again to use the oven.
knobto position
" 0 "
" + " " - "
the
8
Audible warning time adjustment:
3> , .,At the completion of the set duration the timer will stop the oven and give an audible warning Also the
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
" 0 ".,
Semi automatic programming accroding to finishing time-:
Semi automatic programming according to cooking period-:
This function is used to cook in the desired time range The food to be cooked are put into the oven,.
The oven is adjustment to the desired cooking function and temperature degree.
1> " " "" .( .)Press button until you see Dur on the timer screen Before setting cooking period
2> " + " " - " .(Use button to adjust cooking period for the food you wish to cook Refer to the instructions for
settingthecorrecttimeofday. ),' appear on the
screen and the symbols A will light on the screen While doing this the oven will
. , also start
to operate.
This function can be used to receive audible warning at the completion of the ajusted time period.
1> " " . " "" " .Press button to select the minute minder function The relevant symbol will flash
.
2> .(Use button to adjust minute minder Refer to the instructions for setting the correct time
the "" symbol begins to light continuously, the audible warning time adjustment is done.
3> When the time is up, the timer gives an audible warning and the " " symbol begins to flash on the
i
t will stop the audible warning and the symbol
.""
disappears on the screen Audible warning time adjustment is for warning purposes only..
Press "
of day.)
screen
button less than 3 seconds,
Press ""
and "+"together for more than 3 seconds to enter standby mode if oven will not be used
.
The maximum setting of cooking period is 10 hours.
Press ""
button to confirm the day s time will
to position it will stop the audible warning.
knob button less than 3 seconds
Pressing any
Pressing
for more than 3 seconds set the oven to Manual mode again to use the oven.
""
Press any
" " " "
" button to confirm, the " " symbol will begin to light continuously. When
"+""-"
This function is used to cook according to the desired finishing time The food to be cooked is put into.
the oven The oven is adjusted to the desired cooking function and temperature degree. .
1> " " "" .( ).Press button until you see End on the timer screen Before setting finished time
2> .( .)Use button to adjust finishing time Refer to the instructions for setting the correct time of day
3> the symbols A
will light on the screen While doing this the oven will also start to operate
" "" "
. , .
Press ""
button to confirm,
the day 's time will appear on the screen and
,.,At the completion of the set duration the timer will stop the oven and give an audible warning Also
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
4>
button less than 3 seconds, Pressing any it will stop the audible warning.
Pressing
""
for more than 3 seconds set the oven to Manual mode again to use the oven.
knobto position
" 0 "
" + " " - "
the
8
Audible warning time adjustment:
3> , .,At the completion of the set duration the timer will stop the oven and give an audible warning Also the
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
" 0 ".,
Semi automatic programming accroding to finishing time-:
Semi automatic programming according to cooking period-:
This function is used to cook in the desired time range The food to be cooked are put into the oven,.
The oven is adjustment to the desired cooking function and temperature degree.
1> " " "" .( .)Press button until you see Dur on the timer screen Before setting cooking period
2> " + " " - " .(Use button to adjust cooking period for the food you wish to cook Refer to the instructions for
settingthecorrecttimeofday. ),' appear on the
screen and the symbols A will light on the screen While doing this the oven will
. , also start
to operate.
This function can be used to receive audible warning at the completion of the ajusted time period.
1> " " . " "" " .Press button to select the minute minder function The relevant symbol will flash
.
2> .(Use button to adjust minute minder Refer to the instructions for setting the correct time
the "" symbol begins to light continuously, the audible warning time adjustment is done.
3> When the time is up, the timer gives an audible warning and the " " symbol begins to flash on the
i
t will stop the audible warning and the symbol
.""
disappears on the screen Audible warning time adjustment is for warning purposes only..
Press "
of day.)
screen
button less than 3 seconds,
Press ""
and "+"together for more than 3 seconds to enter standby mode if oven will not be used
.
The maximum setting of cooking period is 10 hours.
Press ""
button to confirm the day s time will
to position it will stop the audible warning.
knob button less than 3 seconds
Pressing any
Pressing
for more than 3 seconds set the oven to Manual mode again to use the oven.
""
Press any
" " " "
" button to confirm, the " " symbol will begin to light continuously. When
"+""-"
This function is used to cook according to the desired finishing time The food to be cooked is put into.
the oven The oven is adjusted to the desired cooking function and temperature degree. .
1> " " "" .( ).Press button until you see End on the timer screen Before setting finished time
2> .( .)Use button to adjust finishing time Refer to the instructions for setting the correct time of day
3> the symbols A
will light on the screen While doing this the oven will also start to operate
" "" "
. , .
Press ""
button to confirm,
the day 's time will appear on the screen and
,.,At the completion of the set duration the timer will stop the oven and give an audible warning Also
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
4>
button less than 3 seconds, Pressing any it will stop the audible warning.
Pressing
""
for more than 3 seconds set the oven to Manual mode again to use the oven.
knobto position
" 0 "
" + " " - "
the
8
Audible warning time adjustment:
3> , .,At the completion of the set duration the timer will stop the oven and give an audible warning Also the
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
" 0 ".,
Semi automatic programming accroding to finishing time-:
Semi automatic programming according to cooking period-:
This function is used to cook in the desired time range The food to be cooked are put into the oven,.
The oven is adjustment to the desired cooking function and temperature degree.
1> " " "" .( .)Press button until you see Dur on the timer screen Before setting cooking period
2> " + " " - " .(Use button to adjust cooking period for the food you wish to cook Refer to the instructions for
settingthecorrecttimeofday. ),' appear on the
screen and the symbols A will light on the screen While doing this the oven will
. , also start
to operate.
This function can be used to receive audible warning at the completion of the ajusted time period.
1> " " . " "" " .Press button to select the minute minder function The relevant symbol will flash
.
2> .(Use button to adjust minute minder Refer to the instructions for setting the correct time
the "" symbol begins to light continuously, the audible warning time adjustment is done.
3> When the time is up, the timer gives an audible warning and the " " symbol begins to flash on the
i
t will stop the audible warning and the symbol
.""
disappears on the screen Audible warning time adjustment is for warning purposes only..
Press "
of day.)
screen
button less than 3 seconds,
Press ""
and "+"together for more than 3 seconds to enter standby mode if oven will not be used
.
The maximum setting of cooking period is 10 hours.
Press ""
button to confirm the day s time will
to position it will stop the audible warning.
knob button less than 3 seconds
Pressing any
Pressing
for more than 3 seconds set the oven to Manual mode again to use the oven.
""
Press any
" " " "
" button to confirm, the " " symbol will begin to light continuously. When
"+""-"
This function is used to cook according to the desired finishing time The food to be cooked is put into.
the oven The oven is adjusted to the desired cooking function and temperature degree. .
1> " " "" .( ).Press button until you see End on the timer screen Before setting finished time
2> .( .)Use button to adjust finishing time Refer to the instructions for setting the correct time of day
3> the symbols A
will light on the screen While doing this the oven will also start to operate
" "" "
. , .
Press ""
button to confirm,
the day 's time will appear on the screen and
,.,At the completion of the set duration the timer will stop the oven and give an audible warning Also
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
4>
button less than 3 seconds, Pressing any it will stop the audible warning.
Pressing
""
for more than 3 seconds set the oven to Manual mode again to use the oven.
knobto position
" 0 "
" + " " - "
the
8
Audible warning time adjustment:
3> , .,At the completion of the set duration the timer will stop the oven and give an audible warning Also the
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
" 0 ".,
Semi automatic programming accroding to finishing time-:
Semi automatic programming according to cooking period-:
This function is used to cook in the desired time range The food to be cooked are put into the oven,.
The oven is adjustment to the desired cooking function and temperature degree.
1> " " "" .( .)Press button until you see Dur on the timer screen Before setting cooking period
2> " + " " - " .(Use button to adjust cooking period for the food you wish to cook Refer to the instructions for
settingthecorrecttimeofday. ),' appear on the
screen and the symbols A will light on the screen While doing this the oven will
. , also start
to operate.
This function can be used to receive audible warning at the completion of the ajusted time period.
1> " " . " "" " .Press button to select the minute minder function The relevant symbol will flash
.
2> .(Use button to adjust minute minder Refer to the instructions for setting the correct time
the "" symbol begins to light continuously, the audible warning time adjustment is done.
3> When the time is up, the timer gives an audible warning and the " " symbol begins to flash on the
i
t will stop the audible warning and the symbol
.""
disappears on the screen Audible warning time adjustment is for warning purposes only..
Press "
of day.)
screen
button less than 3 seconds,
Press ""
and "+"together for more than 3 seconds to enter standby mode if oven will not be used
.
The maximum setting of cooking period is 10 hours.
Press ""
button to confirm the day s time will
to position it will stop the audible warning.
knob button less than 3 seconds
Pressing any
Pressing
for more than 3 seconds set the oven to Manual mode again to use the oven.
""
Press any
" " " "
" button to confirm, the " " symbol will begin to light continuously. When
"+""-"
This function is used to cook according to the desired finishing time The food to be cooked is put into.
the oven The oven is adjusted to the desired cooking function and temperature degree. .
1> " " "" .( ).Press button until you see End on the timer screen Before setting finished time
2> .( .)Use button to adjust finishing time Refer to the instructions for setting the correct ti""me of day
3> the symbols A
will light on the screen While doing this the oven will also start to operate
" "" "
. , .
Press ""
button to confirm,
the day 's time will appear on the screen and
,.,At the completion of the set duration the timer will stop the oven and give an audible warning Also
symbol A will begin to flash on the screen After bringing the cooking function and oven temperature"" .
4>
button less than 3 seconds, Pressing any it will stop the audible warning.
Pressing
""
for more than 3 seconds set the oven to Manual mode again to use the oven.
knobto position
" 0 "
" + " " - "
the
8
14
FULL-AUTOMATIC PROGRAMMING
This function is used to cook after a certain period of time with a certain duration, The food to
be cooked is put into the oven The oven is adjusted to the desired cooking function. The oven
temperature is adjusted to the desired degree depending on the food to be cooked.
1. Press “ ” button until you see “ Dur “ on the timer screen. Use “ + ” “ - “ button to adjust
cooking period for the food you wish to cook. Press “ ” button to conrm, the day’s time will
appear on the screen and the symbols “ A “ will begin to continuously light on the screen.
2. Keep pressing on “ ” button until you see “End” on the timer screen. When you see “End” on
the timer screen, Use “ + ” “ - ” button to adjust nishing time, Press “ ” button to conrm, the
day’s time will appear on the screen and the symbol “A” will begin to continuously light on the
screen. The symbol “ ” disappears until the time cooking starts.
You can set a time which can be up 23.59 hours after the time obtained by adding the cooking period
to the day’s time.
The oven will start operating at the time calculated by deducting the cooking period from the set
nishing time, and will stop at the set nishing time. The timer will give an audible warning and the
symbol “A” will begin to ash. After bringing the cooking function and oven temperature knob
to “0” position. Pressing any button less than 3 seconds, it will stop the audible warning.
Pressing “ ” for more than 3 seconds set the oven to Manual mode again to use the oven.
NOTE:
Once setting full-automatic mode, the time can not be changed.
Changing time means canceling the automatic program and enter into corresponding mode.
If you need to reset automatic mode, need to stop setting the current mode to set the automatic
mode according to the above steps again.
SPECIFICATION
1. When setting the date of each function, long press on “ + ”or “ - ” for more than 3 seconds, the
date will progressively and rapidly increase or decrease.
2. When setting each of the time function, if there is no operation for 5 minutes then it will return to
manual mode.
3. When setting each of the time functions, pressing “ ” and “ + ” for more than 3 seconds, a
beep sounds. It will cancel the current time function setting and enter standby mode.
4. We suggest that you run the oven elements for 15 minutes at 200 degrees to burn o any residue
from the surfaces.
OPERATION INSTRUCTIONS
When the oven is first connected to the electrical supply, wait for the display automatically show " 12.30 ",
a beep sound once and the " 12 " " . " flash. Ensure the correct time of the day is set before using the
oven. please note: that is 24 hour clock, for example 2PM shown as 14.00.
To set the correct time of day
1> Press " + " " - " button to adjust the hour setting.
2> Press " " to confirm the hour setting.
3> Press " + " " - " button to adjust the minute setting.
4> Press " " to confirm the minute setting and the timer will be in standby mode.
If the display does not flash, adjust the time of day by pressing the " + " and " - " buttons at
the same time for more than 3 seconds.
Oven On and Off
If the timer is in standby modepress " " for more than 3 seconds, the timer will enter manual
mode and the symbol
Manual mode
:
In manual mode, only the day's time and the symbol " " lights up. The cooking duration has to
be controlled by the user.
Notes: In manual mode, to ensure the oven is not left on accidentally, after 5 hours no any button
pressed, the timer will flash once a second to warn you the oven will enter standby mode. After a
total of 10 hours, the timer will enter standby mode.
When the timer is flashing in manual mode, press any button to reset the timer if you intend to
" and " + " together for more than 3 seconds to enter standby
continue using the oven. Or press "
mode if oven will not be used.
" " will light up continuously .
Note:
Time function setting
1> Set the desired cooking function and the temperature degree.
2> Set the time function, then the oven will on.
If you set Dur or End , after cooking, the oven will automatically turn off.
If you set manual or minute minder, after cooking, bring the cooking function and oven temperature
knob to " 0 " position. Press "
" and " + " buttons for more than 3 seconds to return to standby mode.
In manual mode, pressing " " can enter the time function setting, the sequence of the function
setting is Mamual mode - Minute minder-Dur-End-Manual mode. Then selected cooking function
and adjust the cook temperature if required.
7
Operation Instructions (Continued)
15
Cleaning & Maintenance
For the sake of a good appearance and reliability, keep the unit clean. The
modern design of the unit facilitates maintenance to a minimum. The parts of
the unit which come into contact with food have to be cleaned regularly.
Before any maintenance and cleaning, disconnect the power.
Set all controls in the OFF position.
Wait until the inside of the unit is not hot but only slightly warm-cleaning is
easier than when warm.
Clean the surface of the unit with a damp cloth, soft brush or ne sponge
and then wipe dry.
In case of heavy soiling, use hot water with non-abrasive cleaning product.
For cleaning the glass of the oven door, do not use abrasive cleaners or
sharp metal scrapers, these can scratch the surface or lead to the glass
being damaged.
Never leave acidic substances (lemon juice, vinegar) on stainless steel
parts.
Do not use a high pressure cleaner for cleaning the unit. The baking pans
may be washed in mild detergent.
For the sake of a good appearance and reliability, keep the unit clean. The modern design of the unit
facilitates maintenance to a minimum. The parts of the unit which come into contact with food have to
be cleaned regularly.
Before any maintenance and cleaning, disconnect the power.
Set all controls in the OFF position.
Wait until the inside of the unit is not hot but only slightly warm-cleaning is easier than when warm.
Clean the surface of the unit with a damp cloth, soft brush or fine sponge and then wipe dry.
In case of heavy soiling, use hot water with non-abrasive cleaning product.
For cleaning the glass of the oven door, do not use abrasive cleaners or sharp metal scrapers,
these can scratch the surface or lead to the glass being damaged.
Never leave acidic substances (lemon juice, vinegar) on stainless steel parts.
Do not use a high pressure cleaner for cleaning the unit. The baking pans may be washed in mild
detergent.
CLEANING AND MAINTENANCE
This appliance is marked according to the European directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE).
By ensuring this product is disposed correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. The symbol on the product indicates that this
product may not be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. Disposal must be
carried out in accordance with local environmental regulations for waste dispoasl. For
more detailed information about treatment, recovery and recycling of this product, please
contact your local city office, your household waste disposal service or the shop where you
purchased the product.
11
14
FULL-AUTOMATIC PROGRAMMING
This function is used to cook after a certain period of time with a certain duration, The food to
be cooked is put into the oven The oven is adjusted to the desired cooking function. The oven
temperature is adjusted to the desired degree depending on the food to be cooked.
1. Press “ ” button until you see “ Dur “ on the timer screen. Use “ + ” “ - “ button to adjust
cooking period for the food you wish to cook. Press “ ” button to conrm, the day’s time will
appear on the screen and the symbols “ A “ will begin to continuously light on the screen.
2. Keep pressing on “ ” button until you see “End” on the timer screen. When you see “End” on
the timer screen, Use “ + ” “ - ” button to adjust nishing time, Press “ ” button to conrm, the
day’s time will appear on the screen and the symbol “A” will begin to continuously light on the
screen. The symbol “ ” disappears until the time cooking starts.
You can set a time which can be up 23.59 hours after the time obtained by adding the cooking period
to the day’s time.
The oven will start operating at the time calculated by deducting the cooking period from the set
nishing time, and will stop at the set nishing time. The timer will give an audible warning and the
symbol “A” will begin to ash. After bringing the cooking function and oven temperature knob
to “0” position. Pressing any button less than 3 seconds, it will stop the audible warning.
Pressing “ ” for more than 3 seconds set the oven to Manual mode again to use the oven.
NOTE:
Once setting full-automatic mode, the time can not be changed.
Changing time means canceling the automatic program and enter into corresponding mode.
If you need to reset automatic mode, need to stop setting the current mode to set the automatic
mode according to the above steps again.
SPECIFICATION
1. When setting the date of each function, long press on “ + ”or “ - ” for more than 3 seconds, the
date will progressively and rapidly increase or decrease.
2. When setting each of the time function, if there is no operation for 5 minutes then it will return to
manual mode.
3. When setting each of the time functions, pressing “ ” and “ + ” for more than 3 seconds, a
beep sounds. It will cancel the current time function setting and enter standby mode.
4. We suggest that you run the oven elements for 15 minutes at 200 degrees to burn o any residue
from the surfaces.
OPERATION INSTRUCTIONS
When the oven is first connected to the electrical supply, wait for the display automatically show " 12.30 ",
a beep sound once and the " 12 " " . " flash. Ensure the correct time of the day is set before using the
oven. please note: that is 24 hour clock, for example 2PM shown as 14.00.
To set the correct time of day
1> Press " + " " - " button to adjust the hour setting.
2> Press " " to confirm the hour setting.
3> Press " + " " - " button to adjust the minute setting.
4> Press " " to confirm the minute setting and the timer will be in standby mode.
If the display does not flash, adjust the time of day by pressing the " + " and " - " buttons at
the same time for more than 3 seconds.
Oven On and Off
If the timer is in standby modepress " " for more than 3 seconds, the timer will enter manual
mode and the symbol
Manual mode
:
In manual mode, only the day's time and the symbol " " lights up. The cooking duration has to
be controlled by the user.
Notes: In manual mode, to ensure the oven is not left on accidentally, after 5 hours no any button
pressed, the timer will flash once a second to warn you the oven will enter standby mode. After a
total of 10 hours, the timer will enter standby mode.
When the timer is flashing in manual mode, press any button to reset the timer if you intend to
" and " + " together for more than 3 seconds to enter standby
continue using the oven. Or press "
mode if oven will not be used.
" " will light up continuously .
Note:
Time function setting
1> Set the desired cooking function and the temperature degree.
2> Set the time function, then the oven will on.
If you set Dur or End , after cooking, the oven will automatically turn off.
If you set manual or minute minder, after cooking, bring the cooking function and oven temperature
knob to " 0 " position. Press "
" and " + " buttons for more than 3 seconds to return to standby mode.
In manual mode, pressing " " can enter the time function setting, the sequence of the function
setting is Mamual mode - Minute minder-Dur-End-Manual mode. Then selected cooking function
and adjust the cook temperature if required.
7
Operation Instructions (Continued)
15
Cleaning & Maintenance
For the sake of a good appearance and reliability, keep the unit clean. The
modern design of the unit facilitates maintenance to a minimum. The parts of
the unit which come into contact with food have to be cleaned regularly.
Before any maintenance and cleaning, disconnect the power.
Set all controls in the OFF position.
Wait until the inside of the unit is not hot but only slightly warm-cleaning is
easier than when warm.
Clean the surface of the unit with a damp cloth, soft brush or ne sponge
and then wipe dry.
In case of heavy soiling, use hot water with non-abrasive cleaning product.
For cleaning the glass of the oven door, do not use abrasive cleaners or
sharp metal scrapers, these can scratch the surface or lead to the glass
being damaged.
Never leave acidic substances (lemon juice, vinegar) on stainless steel
parts.
Do not use a high pressure cleaner for cleaning the unit. The baking pans
may be washed in mild detergent.
For the sake of a good appearance and reliability, keep the unit clean. The modern design of the unit
facilitates maintenance to a minimum. The parts of the unit which come into contact with food have to
be cleaned regularly.
Before any maintenance and cleaning, disconnect the power.
Set all controls in the OFF position.
Wait until the inside of the unit is not hot but only slightly warm-cleaning is easier than when warm.
Clean the surface of the unit with a damp cloth, soft brush or fine sponge and then wipe dry.
In case of heavy soiling, use hot water with non-abrasive cleaning product.
For cleaning the glass of the oven door, do not use abrasive cleaners or sharp metal scrapers,
these can scratch the surface or lead to the glass being damaged.
Never leave acidic substances (lemon juice, vinegar) on stainless steel parts.
Do not use a high pressure cleaner for cleaning the unit. The baking pans may be washed in mild
detergent.
CLEANING AND MAINTENANCE
This appliance is marked according to the European directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE).
By ensuring this product is disposed correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. The symbol on the product indicates that this
product may not be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. Disposal must be
carried out in accordance with local environmental regulations for waste dispoasl. For
more detailed information about treatment, recovery and recycling of this product, please
contact your local city office, your household waste disposal service or the shop where you
purchased the product.
11
16
Attach your receipt
to this page
17
For future reference, please record the following information which can be found on the rating plate and the date of
purchase which can be found on your sales invoice.
STORE DETAILS
STORE NAME
|
ADDRESS
|
TELEPHONE
|
PURCHASE DATE
|
PRODUCT DETAILS
MODEL NO.
|
SERIAL NO.*
|
Purchase Details
16
Attach your receipt
to this page
17
For future reference, please record the following information which can be found on the rating plate and the date of
purchase which can be found on your sales invoice.
STORE DETAILS
STORE NAME
|
ADDRESS
|
TELEPHONE
|
PURCHASE DATE
|
PRODUCT DETAILS
MODEL NO.
|
SERIAL NO.*
|
Purchase Details
18
Warranty Information
WARRANTY TERMS & CONDITIONS
BuIlT-IN OvEN
This document sets out the terms and conditions of the
product warranties for Residentia Group Appliances. It is
an important document. Please keep it with your proof of
purchase documents in a safe place for future reference
should you require service for your Appliance.
1. IN THIS WARRANTY
(a) acceptable quality’ as referred to in clause 10 of this
warranty has the same meaning referred to in the ACL;
(b) ACL’ means Trade Practices Amendment (Australian
Consumer Law) Act (No.2) 2010;
(c) Appliance’ means any Residentia Group product
purchased by you accompanied by this document;
(d) ASR’ means Residentia Group authorised service
representative;
(e) ‘Residentia Group’ means Residentia Group Pty Ltd
of 165 Barkly Ave, Burnley VIC 3121, ACN 600 546 656
in respect of Appliances purchased in Australia;
(f ) ‘major failure’ as referred to in clause 10 of this
warranty has the same meaning referred to in the ACL
and includes a situation when an Appliance cannot
be repaired or it is uneconomic for Residentia Group,
at its discretion, to repair an Appliance during the
Warranty Period;
(g) ‘Warranty Period’ means:
(i) where the Appliance is used for personal,
domestic or household use (i.e. normal
single family use) as set out in the instruction
manual, the Appliance is warranted against
manufacturing defects for 24 months, following
the date of original purchase of the Appliance;
(h) you’ means the purchaser of the Appliance not having
purchased the Appliance for re-sale, and ‘your’ has a
corresponding meaning.
2. This warranty only applies to Appliances purchased
and used in Australia and is in addition to (and does
not exclude, restrict, or modify in any way) any
non-excludable statutory warranties in Australia.
3. During the Warranty Period Residentia Group or its
ASR will, at no extra charge if your Appliance is readily
accessible for service, without special equipment
and subject to these terms and conditions, repair or
replace any parts which it considers to be defective.
Residentia Group or its ASR may use remanufactured
parts to repair your Appliance. You agree that any
replaced Appliances or parts become the property of
Residentia Group. This warranty does not apply to light
globes, baeries, filters or similar perishable parts.
4. Parts and Appliances not supplied by Residentia
Group are not covered by this warranty.
19
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if
the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The Australian Consumer Law requires the
inclusion of the following statement with
this warranty:
5. You will bear the cost of transportation, travel and
delivery of the Appliance to and from Residentia
Group or its ASR. If you reside outside of the service
area, you will bear the cost of:
(a) travel of an authorised representative;
(b) transportation and delivery of the Appliance to and
from Residentia Group or its ASR, in all instances,
unless the Appliance is transported by Residentia
Group or its ASR, the Appliance is transported at
the owner’s cost and risk while in transit to and from
Residentia Group or its ASR.
6. Proof of purchase is required before you can make a
claim under this warranty.
7. You may not make a claim under this warranty unless
the defect claimed is due to faulty or defective parts
or workmanship. Residentia Group is not liable in the
following situations (which are not exhaustive):
(a) the Appliance is damaged by:
(i) accident
(ii) misuse or abuse, including failure to properly
maintain or service
(iii) normal wear and tear
(iv) power surges, electrical storm damage or
incorrect power supply
(v) incomplete or improper installation
(vi) incorrect, improper or inappropriate operation
(vii) insect or vermin infestation
(viii) failure to comply with any additional instructions
supplied with the Appliance;
(b) the Appliance is modified without authority from
Residentia Group in writing;
(c) the Appliances serial number or warranty seal has
been removed or defaced;
(d) the Appliance was serviced or repaired by anyone
other than Residentia Group, an authorised repairer
or ASR.
8. This warranty, the contract to which it relates and the
relationship between you and Residentia Group are
governed by the law applicable where the Appliance
was purchased.
9. To the extent permied by law, Residentia Group
excludes all warranties and liabilities (other than as
contained in this document) including liability for any
loss or damage whether direct or indirect arising from
your purchase, use or non use of the Appliance.
10. For Appliances and services provided by Residentia
Group in Australia, the Appliances come with a
guarantee by Residentia Group that cannot be
excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a
major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also
entitled to have the Appliance repaired or replaced
if the Appliance fails to be of acceptable quality and
the failure does not amount to a major failure. The
benefits to you given by this warranty are in addition
to your other rights and remedies under a law in
relation to the Appliances or services to which the
warranty relates.
11. At all times during the Warranty Period, Residentia
Group shall, at its discretion, determine whether repair,
replacement or refund will apply if an Appliance has a
valid warranty claim applicable to it.
12. To enquire about claiming under this warranty, please
follow these steps:
(a) carefully check the operating instructions, user manual
and the terms of this warranty;
(b) have the model and serial number of the Appliance
available;
(c) have the proof of purchase (e.g. an invoice) available;
(d) telephone the numbers shown below.
13. You accept that if you make a warranty claim,
Residentia Group and its ASR may exchange
information in relation to you to enable Residentia
Group to meet its obligations under this warranty.
IMPORTANT
Before calling for service, please ensure that the steps in
point 12 have been followed.
Telephone contacts
Service: Please call 1300 11 HELP (4357)
18
Warranty Information
WARRANTY TERMS & CONDITIONS
BuIlT-IN OvEN
This document sets out the terms and conditions of the
product warranties for Residentia Group Appliances. It is
an important document. Please keep it with your proof of
purchase documents in a safe place for future reference
should you require service for your Appliance.
1. IN THIS WARRANTY
(a) ‘acceptable quality’ as referred to in clause 10 of this
warranty has the same meaning referred to in the ACL;
(b) ACL’ means Trade Practices Amendment (Australian
Consumer Law) Act (No.2) 2010;
(c) Appliance’ means any Residentia Group product
purchased by you accompanied by this document;
(d) ASR’ means Residentia Group authorised service
representative;
(e) ‘Residentia Group’ means Residentia Group Pty Ltd
of 165 Barkly Ave, Burnley VIC 3121, ACN 600 546 656
in respect of Appliances purchased in Australia;
(f ) ‘major failure’ as referred to in clause 10 of this
warranty has the same meaning referred to in the ACL
and includes a situation when an Appliance cannot
be repaired or it is uneconomic for Residentia Group,
at its discretion, to repair an Appliance during the
Warranty Period;
(g) ‘Warranty Period’ means:
(i) where the Appliance is used for personal,
domestic or household use (i.e. normal
single family use) as set out in the instruction
manual, the Appliance is warranted against
manufacturing defects for 24 months, following
the date of original purchase of the Appliance;
(h) you’ means the purchaser of the Appliance not having
purchased the Appliance for re-sale, and ‘your’ has a
corresponding meaning.
2. This warranty only applies to Appliances purchased
and used in Australia and is in addition to (and does
not exclude, restrict, or modify in any way) any
non-excludable statutory warranties in Australia.
3. During the Warranty Period Residentia Group or its
ASR will, at no extra charge if your Appliance is readily
accessible for service, without special equipment
and subject to these terms and conditions, repair or
replace any parts which it considers to be defective.
Residentia Group or its ASR may use remanufactured
parts to repair your Appliance. You agree that any
replaced Appliances or parts become the property of
Residentia Group. This warranty does not apply to light
globes, baeries, filters or similar perishable parts.
4. Parts and Appliances not supplied by Residentia
Group are not covered by this warranty.
19
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if
the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The Australian Consumer Law requires the
inclusion of the following statement with
this warranty:
5. You will bear the cost of transportation, travel and
delivery of the Appliance to and from Residentia
Group or its ASR. If you reside outside of the service
area, you will bear the cost of:
(a) travel of an authorised representative;
(b) transportation and delivery of the Appliance to and
from Residentia Group or its ASR, in all instances,
unless the Appliance is transported by Residentia
Group or its ASR, the Appliance is transported at
the owner’s cost and risk while in transit to and from
Residentia Group or its ASR.
6. Proof of purchase is required before you can make a
claim under this warranty.
7. You may not make a claim under this warranty unless
the defect claimed is due to faulty or defective parts
or workmanship. Residentia Group is not liable in the
following situations (which are not exhaustive):
(a) the Appliance is damaged by:
(i) accident
(ii) misuse or abuse, including failure to properly
maintain or service
(iii) normal wear and tear
(iv) power surges, electrical storm damage or
incorrect power supply
(v) incomplete or improper installation
(vi) incorrect, improper or inappropriate operation
(vii) insect or vermin infestation
(viii) failure to comply with any additional instructions
supplied with the Appliance;
(b) the Appliance is modified without authority from
Residentia Group in writing;
(c) the Appliances serial number or warranty seal has
been removed or defaced;
(d) the Appliance was serviced or repaired by anyone
other than Residentia Group, an authorised repairer
or ASR.
8. This warranty, the contract to which it relates and the
relationship between you and Residentia Group are
governed by the law applicable where the Appliance
was purchased.
9. To the extent permied by law, Residentia Group
excludes all warranties and liabilities (other than as
contained in this document) including liability for any
loss or damage whether direct or indirect arising from
your purchase, use or non use of the Appliance.
10. For Appliances and services provided by Residentia
Group in Australia, the Appliances come with a
guarantee by Residentia Group that cannot be
excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a
major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also
entitled to have the Appliance repaired or replaced
if the Appliance fails to be of acceptable quality and
the failure does not amount to a major failure. The
benefits to you given by this warranty are in addition
to your other rights and remedies under a law in
relation to the Appliances or services to which the
warranty relates.
11. At all times during the Warranty Period, Residentia
Group shall, at its discretion, determine whether repair,
replacement or refund will apply if an Appliance has a
valid warranty claim applicable to it.
12. To enquire about claiming under this warranty, please
follow these steps:
(a) carefully check the operating instructions, user manual
and the terms of this warranty;
(b) have the model and serial number of the Appliance
available;
(c) have the proof of purchase (e.g. an invoice) available;
(d) telephone the numbers shown below.
13. You accept that if you make a warranty claim,
Residentia Group and its ASR may exchange
information in relation to you to enable Residentia
Group to meet its obligations under this warranty.
IMPORTANT
Before calling for service, please ensure that the steps in
point 12 have been followed.
Telephone contacts
Service: Please call 1300 11 HELP (4357)
T. 1300 11 4357
E. support@residentiagroup.com.au
E S S E N T I A L S FOR LIFE
An initiative by
Residentia Group
www.solt.house
T. 1300 11 4357
E. support@residentiagroup.com.au
E S S E N T I A L S FOR LIFE
An initiative by
Residentia Group
www.solt.house
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Solt GGSO605TB User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI