Pit Boss 41052 Installation guide

Brand: Pit Boss

Model: 41052

Type: Installation guide

 480 9239630

   18779422246

.

Included Parts: (1) Lid, (2) Hinges x2 , (3) Left Top Hinge,

(4) Right Top Hinge, (5) Lid Handle Bezel x2, (6) Lid

Handle

Remove the two screws from the back of the firebox

that holds the burners in place.

First, install the Left Top Hinge with the pre-installed

screws, locking washers, and washers. Slide the hinge

pin into the lower hinge on the firebox base.

Remove the griddle cooking surface and place aside.

Place the hinge on the back edge of the firebox

at a 90° angle and rotate down to line it up to the

screw holes from the burners. Screw the hinges and

burners in place with the screws, locking washers, and

washers.

First, slide the Right Top Hinge pin into the lower

hinge on the firebox base. Then secure the Right Top

Hinge with the pre-installed screws, locking washers,

and washers.

 

21  

 41052

1

3

5

2

4

6

1

*  

2

4

3

5

6

1

2 2

1

602221110UMV

©2022 DANSONS

/ 480 9239630

  /  18779422246

.

602221110UMV

©2022 DANSONS

Remove the pre-installed screws from the handle.

Place the lid handle bezels between the handle and

lid. Secure them into place with the screws.

The Griddle Lid is fully installed.

Place the griddle cooking surface on top of the

firebox.

7

9

8

1
2

Pit Boss 41052 Installation guide

Brand: Pit Boss

Model: 41052

Type: Installation guide

Related papers

Other documents