2. SCE
  3. SCE-60EL4812LPPL

SCE SCE-60EL4812LPPL Installation Information

  • Hello! I've reviewed the document regarding the center channel reinstallation for Saginaw Control products. It covers the procedures for gasket alignment, fastener torquing, and sealant application for different gauge enclosures. I am ready to answer any questions you may have about the instructions provided in the document.
  • What is the recommended torque for the fasteners?
    Where should the sealant be applied?
    What are the different enclosure gauges covered in the document?
center-channel-instman.pdf
1
CENTER CHANNEL REINSTALLATION
Align the gasket with the
center channel brackets
and reinstall as shown.
-Apply sealant (RTV or similar) to just
the inside left and right sides of both
the top and bottom gasket surface.
-Gently peel back gasket and add
sealant to door opening seams.
*Shown in green dots ••••••
Secure all fasteners
to 40-60 inch lbs.
11/12 Gauge Enclosures
90° Flange Trough Collar
SCE-127617
SCE-128380
SCE-129751
14 Gauge Enclosures
12 Gauge Enclosures
30° Flange Trough Collar
!
/