2. Computers & electronics
  3. Audio & home theatre
  4. CD radios
  5. AMC
  6. FM/AM/CD/USB Player

AMC FM/AM/CD/USB Player User manual

  • Hello! I am an AI chatbot trained to assist you with the AMC FM/AM/CD/USB Player User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Important
Do not install this equipment in a confined
space such as a book case or similar unit.
The apparatus should not be dripped or
splashed and no objects filled with liquids,
such as vases, should not be placed on the
apparatus.
This unit should not be used near water (e.g.
near bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a
swimming pool, etc.) Care should be taken so
than objects do not fall and liquids are not
spilled into enclosure through openings.
CONTENTS:
Before you start
Introductions 4
Installation 4
Accessories 4
Operation
Front panel 5
Operation 5
Specifications
General 7
Introductions
This FM/AM/CD/USB Player is fully designed for compressed audio files supporting and FM/AM
receiving. RDS function is available too.
Installation
1. Unplug amplifier from the main power and remove the top and slot covers.
2. Insert module in to amplifier and mount the antenna connector in to rear panel if module have
radio tuner.
3. Connect module cable in free connector located near the module slot in the main amplifier’s PCB.
Antenna cable should be connected to the antenna connector.
4. Fix module with the screws added into the module package and mount top amplifier’s cover.
Accessories
The accessories which are included in the box are:
Antenna
Connection cable
User manual
Antenna socket
Screws
Front Panel
1. USB slot
2. Power button
3. CD slot
4. Display
5. Stop button (preset 1 in tuner mode)
6. Play/Pause button (preset 2 in tuner mode)
7. BACK/ FB button
8. NEXT/ FF button
9. DIRRY DOWN button (preset 6 in tuner mode)
10. DIRRY Up button (preset 5 in tuner mode)
11. Function buttons ( preset 3 (REP) and preset 4
(BAND) in tuner mode)
12. Volume control and function knob
13. CD eject button
Rear Panel
1. Main connector 2. FM frequency selector
Operation
POWER ON/OFF
By pressing this key, the unit is switched on and off. This unit is turned on by pressing any key.
FUNCTION AND VOLUME KNOB
Rotate Volume up/down knob to control the VOLUME. To select CD, USB or FM, press the knob shortly until
the desired source is shown on the display.
BAND BUTTON
RADIO MODE:
Each band is toggled cyclically by pressing this key FM1-FM2-FM3-MW1-MW2.
NEXT/BACK
RADIO MODE:
When pressed short, these keys are operated as seek tuning mode.
When pressed longer than 1 sec., they are operated as manual tuning mode.
CD/USB PLAYER MODE:
When pressed short, they are operated as TRACK UP or TRACK DOWN mode.
When pressed longer than 1 sec., they are operated as CUE or REVIEW mode.
CD EJECT BUTTON
Press the EJECT button to remove the CD.
PLAY/PAUSE BUTTON ( )
During PLAY mode, press PAUSE button to PAUSE. Press it again to resume play.
REPEAT BUTTON (RPT)
When this button is pressed, RPT indication is displayed and play of the selected track will be continually
repeated until the Track Repeat mode is cancelled by pressing RPT button again.
STOP
Stops playing of the CD and USB.
DIR-UP/DIR-DN
CD/USB PLAYER MODE:
Select folder
RADIO MODE:
Select radio station from the presets.
RANDOM
Plays tracks in random sequence
MEMO
In order to store radio station frequency to the one of six presets follows the steps:
Select radio frequency by using the “next and “back” buttons.
Press the “MEMO” button for the sort time.
Long press (till preset number appliers on the screen) one of the radio preset button.
PRESET BUTTONS:
Play/pause – preset 1
STOP – preset 2
REP – preset 3
RAND – preset 4
DIR-UP – preset 5
DIR-DN – preset 6
Memo button on CD/USB mode displays ID3 information.
EQ
Press key to change EQ mode cyclically.
Flat → Classic →POP →Rock
MUTE
Set or release the mute mode.
MAIN CONECTOR
Connect module cable in free connector located near the module slot in the main amplifier’s PCB. Antenna
cable should be connected to the antenna connector.
SPECIFICATIONS
GENERAL
Power Supply Voltage DC 12 Volts (Negative Ground)
Max Current Consumption 1A
Max Output Level +6dB
FM SECTION
Frequency range 87.5-108.0MHz
Channel step 50 KHzs start
Intermediate frequency 10.7MHz
Sensitivity 2uV
Signal to noise radio >60dB
MW SECTION
Frequency range 522-1620KHz
Channel step 9 KHz
Intermediate frequency 450KHz
Sensitivity 2uV
Signal to noise radio >50dB
CD/USB PLAYER SECTION
Signal to Noise Ratio >60dB
Frequency Response 20Hz-20KHz
AMC is a registered trademark of AMC Baltic www.amcpro.eu
/