FOR MORE INFORMATION: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
DESCRIPTION
• Metal construction with chrome plated finish
• 1/2" connections: IPS - exterior, CC - interior
• Includes showerhead, arm and flange, tub filler spout
OPERATION
• Acrylic knob style handles with hot and cold
color indicators
• Volume and temperature controlled by rotating
either handle counterclockwise to open and
clockwise to close
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min) Max.
• EP Suffix models are limited to 1.75 gpm (6.6 L/min.) at 80 psi
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel materials
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125-1,
and all applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
FINISHED
WALL LINE
FLOOR
OPENING
DIRECTION
NOTE:
VALVE CAN
BE ADJUSTED
FOR DOWN
FEED INST.
HOT
INLET
COLD
INLET
OPENING
DIRECTION
32"(813mm) FOR
TUB/SHOWER
COMBINATIONS
AND TUB
MODELS ONLY
MIN. 2"(51mm)
MAX. 3-1/16" (78mm)
6'-6"
(1981mm)
NOMINAL
SHOWER
45"(1143mm)/
48"(1219mm)
8"
(203mm)
CHATEAU
®
Three-Handle Tub/Shower Valve
Models: 2995, 2995EP
There is more than 1 version of this model.
Page down to identify the version you have.
Rev. 5/16
FOR MORE INFORMATION: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
DESCRIPTION
• Chrome plated metal construction
• 1/2" IPS connections
• Includes showerhead, arm and flange
OPERATION
• Dual control
• Acrylic knob style handles
• Volume and temperature controlled by rotating
either handle counterclockwise to open and clockwise
to close
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min) max.
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel materials
STANDARDS
• Designed and manufactured to comply with the
requirements of: CSA B-125 and ASME A112.18.1M
and all applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
CHATEAU
®
Three-Handle Tub/Shower Valve
Model: 2995
FINISHED
WALL LINE
FLOOR
OPENING
DIRECTION
NOTE:
VALVE CAN
BE ADJUSTED
FOR DOWN
FEED INST.
HOT
INLET
COLD
INLET
OPENING
DIRECTION
32"(813mm) FOR
TUB/SHOWER
COMBINATIONS
AND TUB
MODELS ONLY
MIN. 2"(51mm)
MAX. 3-1/16" (78mm)
6'-6"
(1981mm)
NOMINAL
SHOWER
45"(1143mm)/
48"(1219mm)
8"
(203mm)
Rev. 1/97
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI