VOLTCRAFT BS-8.0 Operating instructions

Brand: VOLTCRAFT

Model: BS-8.0

Category: Security camera accessories

Type: Operating instructions

VOLTCRAFT BS-8.0 is a camera attachment that can be used with various Voltcraft endoscope main units for visual troubleshooting and inspection of voltage-free systems and installations. It has four integrated LEDs for recording in dark spaces, with adjustable brightness via the connected endoscope main unit. The camera cable and head are waterproof, allowing use in voltage-free liquids (excluding acidic or basic solutions).

Page is loading ...

OPERATING INSTRUCTIONS

VERSION 06/13

BS-8.0/20m VGA CAMERA PROBE

ITEM NO.: 40 92 12

INTENDED USE

This product is a camera attachment for various endoscope main units from the Voltcraft

product range (see the compatibility list under “Technical data”). It is designed for visual

troubleshooting and inspection of voltage-free systems and installations. There are four LEDs

integrated in the camera head, permitting recording in dark spaces. The brightness of the

LEDs can be regulated via the connected endoscope main unit. The camera cable and head

are waterproof and thus suitable for use in voltage-free liquids (no acidic or basic solutions).

Use on persons or animals as well as in potentially explosive areas is not permitted. The

device is supplied with power via the connected endoscope main unit.

For safety and approval purposes (CE), you must not rebuild and/or modify this product. If

you use the product for purposes other than those described above, the product may be

damaged. In addition, improper use can cause hazards such as short circuiting, re, electric

shock etc. Read the instructions carefully and keep them. Make this product available to third

parties only together with its operating instructions.

This product complies with the statutory national and European requirements. All company

DELIVERY CONTENT

• VGA camera probe

• Operating instructions

SAFETY INSTRUCTIONS

Read the operating instructions carefully and especially observe the safety

information. If you do not follow the safety instructions and information

on proper handling in this manual, we assume no liability for any resulting

personal injury or damage to property. Such cases will invalidate the

warranty/guarantee.

a) Persons / Product

• The device is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. These may become

dangerous playing material for children.

• Protect the product from extreme temperatures, direct sunlight, strong jolts, high

humidity, moisture, ammable gases, vapours and solvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, take it out of operation and

protect it from any accidental use. Safe operation can no longer be guaranteed if

the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in poor ambient conditions or

- has been subjected to any serious transport-related stresses.

• Please handle the product carefully. Jolts, impacts or a fall even from a low height

can damage the product.

• Also observe the safety and operating instructions of any other devices which are

connected to the product.

• Heed all legal regulations for operation of the product. Do not use the product for

the surveillance of persons!

b) Miscellaneous

• Consult an expert when in doubt about operation, safety or connection of the

device.

• Maintenance, modications and repairs are to be performed exclusively by an

expert or at a qualied shop.

If you are not sure about the correct connection or use, or if questions arise which are not

covered by these operating instructions, please do not hesitate to contact our technical

support or another qualied specialist.

Voltcraft®, Lindenweg 15, D-92242 Hirschau, Tel. +49 96 04 / 40 87 80

Legal notice

These operating instructions are a publication by Voltcraft®, Lindenweg 15, D-92242 Hirschau/Germany, Phone +49 96 04 / 40 87 80

(www.voltcraft.de).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data processing

systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.

OPERATION

Hold the camera head and cable only in voltage-free liquids (no acidic

or basic solutions). The cable may not be submerged in water past the

marking “IP 67 max. water level” located on the plug, as the plug itself is not

waterproof.

The endoscope is suited for inspection only in voltage-free systems.

The camera head is made of metal and can cause short-circuiting. For

safety reasons, make sure all system components are voltage-free before

inspection.

1. Carefully connect the product plug to the corresponding socket on your endoscope main

unit.

Make sure that the pins inside the plug are correctly aligned with the socket to prevent

their breaking off or bending.

2. Secure the connection using the fastening ring on the endoscope main unit.

3. Repeat these steps in reverse order to disconnect the product from your endoscope main

unit.

You can nd further operating instructions, such as on regulation of LED brightness, in

the operating instructions of the endoscope main unit.

CLEANING

• Before cleaning, disconnect the product from the endoscope main unit.

• Use a small brush or cotton swab to clean the camera lens.

• Use a cloth, slightly damp with lukewarm water, to clean the camera cable.

DISPOSAL

Electronic devices are recyclable waste and must not be disposed of in the

household waste.

At the end of its service life, dispose of the product according to the relevant

statutory regulations.

You thus full your statutory obligations and contribute to the protection of the environment.

TECHNICAL DATA

Compatible with .................... BS-200XW, BS-250XWSD, BS-220XIP, BS-300XRSD, BS-50X,

.............................................. BS-100XIP, BS-250XIPSD

Resolution ............................. 640 x 480

Lighting ................................. 4 white LEDs

Illuminance ......... ..................>600 lux ±150 lux (at a distance of 20 mm)

Protection type ...................... IP67

Field of view .......................... 54º

Focus .................................... 30 – 60 mm

Exposure .............................. automatic

White balance ....................... automatic

Operating conditions ............. 0 to +45 ºC, 15 – 85 % RH

Storage conditions ................ -10 to +50 ºC, 15 – 85 % RH

Camera head Ø .................... 8 mm

Length................................... 20 m ±0.2 m

Weight ..................................approx. 440 g

Page is loading ...

VOLTCRAFT BS-8.0 Operating instructions

Brand: VOLTCRAFT

Model: BS-8.0

Category: Security camera accessories

Type: Operating instructions

Download PDF

report

in other languages

français: VOLTCRAFT BS-8.0 Mode d'emploi
Deutsch: VOLTCRAFT BS-8.0 Bedienungsanleitung
Nederlands: VOLTCRAFT BS-8.0 Handleiding

VOLTCRAFT BS-8.0 Operating instructions

VOLTCRAFT BS-8.0 Operating instructions

in other languages

Related papers

Other documents