PAGING MICROPHONE
GENERAL DESCRIPTION
The paging microphone is of desk-top type and designed to be used for paging and announcements. It is furnished
with an easy-to-use large talk switch and a convenient lock lever. In addition, it comes with a remote control function to
activate amplifier's power or chime unit. Refer to the amplifier's instruction manual for details of the remote function
and connection.
APPEARANCE
CIRCUIT DIAGRAM
Push to Talk
SPECIFICATIONS
Model
Type
Directivity
Rated Impedance
Rated Sensitivity
Frequency Response
Connection Cable
Cable Length
Terminal of Cable
Weight
Dimensions
Talk Switch
Remote Switch
Finish
PM-660U
Moving coil microphone
Unidirectional
600 , balanced
- 58 dB
(1
kHz,
0
dB=1 V/Pa)
100 Hz to 10 kHz
2-core shielded plus 2-core cable
2.5 m
None
440 g
100 (W) × 215 (H) × 150 (D) mm
Push-to-talk type (open-off circuit, with lock lever)
Leaf spring contact (interlocked with talk switch)
Head : Zinc plated steel wire, baked painting (Gray)
Body : ABS resin (Gray)
* Weight given in the above specifications does not include the connection cable.
* Specifications are subject to change without notice.
TOA Corporation
INSTRUCTION MANUAL
PM-660U
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Optimus PM-660U User manual
-
-
-
-
-
TOA Electronics VM-2120 User manual
-
Avsl CSM660 Installation and Operating Instructions
-
-
Panasonic WU-ZM001E User manual
-
TOA Electronics A-9120S User manual
