SIIG CB-DP1H11-S1 User guide

Brand: SIIG

Model: CB-DP1H11-S1

Category: Video cable adapters

Type: User guide

SIIG CB-DP1H11-S1 is a compact and portable adapter that allows you to connect your Mini DisplayPort or Thunderbolt port-equipped computer to a variety of displays, including HDMI, DVI, and VGA monitors or projectors. It supports resolutions up to 4K (3840 x 2160) for HDMI and 1920 x 1080 for DVI and VGA, providing crystal-clear visuals for presentations, video streaming, and gaming.

SIIG CB-DP1H11-S1 is a compact and portable adapter that allows you to connect your Mini DisplayPort or Thunderbolt port-equipped computer to a variety of displays, including HDMI, DVI, and VGA monitors or projectors. It supports resolutions up to 4K (3840 x 2160) for HDMI and 1920 x 1080 for DVI and VGA, providing crystal-clear visuals for presentations, video streaming, and gaming.

User Reference Guide

Compact and easy to bring on the road

04-0988A

2

Thanks for purchasing SIIG product. Please read this manual

carefully prior to use.

If you require more information about our products, please visit

www.siig.com.

For technical support, please go to

www.siig.com/support.

3

Product Layout



DVI



HDMI



VGA

Mini DisplayPort



4

Package Contents

 Mini DisplayPort 1.2 to HDMI / DVI / VGA Conversion Adapter

 User Reference Guide

Specifications

 Input: Mini DisplayPort 1.2 (Dual-mode)/ Thunderbolt Port Male

 Output: HDMI Female / DVI Female / VGA Female

 Max resolution:

- HDMI: 4K x 2K (w/ audio)

- DVI & VGA: 1920 x 1080 @ 60HZ (w/o audio)

 Power: Supplied by Mini DisplayPort (No external power required)

 Connector type of Mini DisplayPort: Golden-plated

5

Start using

 Connections

Mini DisplayPort: Connect to the Mini DisplayPort of the competer

HDMI / DVI / VGA Port: Choose one port to connect with your

monitor / HDTV / Projecter by individual monitor cable (not included)

 Notes

1. The adapter does not support more than one output simultaneously.

2. The adapter supports converting signal from Mini DisplayPort to

HDMI /DVI / VGA only. It's not a bi-directional adapter.

3. There's no audio output from DVI and VGA.

4. Macs manufactured before 2010 do not support audio output over

Mini DisplayPort.

6

5. To achieve Mini DisplayPort 1.2 performace, please make sure that

the connected input source is also Mini DisplayPort 1.2 supported.

7

FAQ & Solutions

If I would like to switch to another output of the adapter, how should I do?

 Unplug the connected monitor cable from the adapter, then plug

another monitor cable into the output port you are going to use.

If the adapter isn't working properly:

 Check all connections of the adapter and monitor cable are firm.

 Unplug the connected monitor cable from the adapter and plug

again.

 If above doesn't work, unplug the adpater from the Mini

DisplayPort of the computer and plug again.

If the max. resolution of HDMI output couldn't reach 4K x 2K:

 Check that whether the connected monitor is 4K x 2K supported.

3 years warranty limited

Warranty & Contact Info

www.siig.com

(510) 657-8688

Mon-Fri 8:00~17:00

1
2
3
4
5
6
7
8

SIIG CB-DP1H11-S1 User guide

Brand: SIIG

Model: CB-DP1H11-S1

Category: Video cable adapters

Type: User guide

SIIG CB-DP1H11-S1 is a compact and portable adapter that allows you to connect your Mini DisplayPort or Thunderbolt port-equipped computer to a variety of displays, including HDMI, DVI, and VGA monitors or projectors. It supports resolutions up to 4K (3840 x 2160) for HDMI and 1920 x 1080 for DVI and VGA, providing crystal-clear visuals for presentations, video streaming, and gaming.

Related papers

Other documents