5
Safety Notes
• Thismodelmayonlybeusedwiththeoperatingsystemdesignedforit.
• Useonlyswitchedmodepowersupplyunitsandtransformersthataredesigned
for your local power system.
• Thislocomotivemustneverbesuppliedwithpowerfrommorethanonepower
pack.
• Paycloseattentiontothesafetynotesintheinstructionsforyouroperatingsys-
tem.
• Notforchildrenundertheageof15.
• WARNING! Sharp edges and points required for operation.
Important Notes
• Theoperatinginstructionsareacomponentpartoftheproductandmusttherefore
bekeptinasafeplaceaswellasincludedwiththeproduct,ifthelatterisgivento
someone else.
• PleaseseeyourauthorizedLGBdealerforrepairsorspareparts.
• Thewarrantycardincludedwiththisproductspeciesthewarrantyconditions.
• Disposing:www.maerklin.com/en/imprint.html
Functions
• ThismodelisdesignedforoperationonLGBtwo-railDCsystemswithconventio-
nalLGBDCtraincontrollersorpowerpacks(DC,0–24volts).
• InterfaceforinstallationofDCC.
General Note to Avoid Electromagnetic Interference:
Apermanent,awlesswheel-railcontactisrequiredinordertoguaranteeoperation
for which a model is designed.
Do not make any changes to current-conducting parts.
Mode of Operation Switch
Thismodelhasathree-waypowercontrolswitchmountedinsidethecab.
Pos. 0 All power off
Pos. 1 Power to lights and smoke generator
Pos.2 Powertolights,smokegeneratorandmotor
Smoke Generator
Thismodelisequippedwithasmokegenerator.AsmallsupplyofLGBSmokeand
CleaningFluidisincludedwiththismodel.Forbestoperation,llthegeneratorhalf-
waywithuid.Ifthegeneratorisoverlled,itwillnotconverttheuidintosmoke.
Attention! Never touch the heating element in the center of the smoke generator. It is
hot and fragile.
SERVICE
Lubrication
Theaxlebearingsandthesiderodbearingsshouldbelubricatedoccasionallywitha
smallamountofMärklin-Oil(7149).
Replacing the light bulbs (E130 023)
Front lantern:Carefullypullthecableandlightbulboutofthelantern.Replacethe
bulb. Reassemble.
Rear lantern:Carefullyprythelensawayfromthelantern.Usingtweezers,remove
and replace the bulb. Reassemble.
Cab light:Usingtweezers,removeandreplacethebulb.
Replacing the traction tire (E126 174)
• Removethetwohexheadscrewsthatattachthesiderodstotherearwheels.
Remove the side rods from the rear wheels.
• Useasmall,straight-bladescrewdrivertoreplacethetractiontire:Prytheold
traction tire out of the wheel groove.
• Gentlyinsertthenewtractiontireintothewheelgroove.
• Makesurethatthetractiontireisseatedproperlyinthewheelgroove.