Weenect CATS User manual

Page is loading ...

10

FR

EN

DE

NL

IT

ES

PT

Quick start

To help you get started using your tracker, we recommend that

you read this guide carefully.

1 – Activate your tracker

Go to my.weenect.com and follow the instructions for creating

your account, activating your tracker, and selecting a subscrip-

tion.

2 – Download the app

To download the free Weenect mobile app, search for “Weenect”

in the App Store for iPhone or Google Play for Android.

3 – Turn your tracker on

Once your tracker is activated, go outside and turn it on by press-

ing the On/O button for three seconds until the tracker emits

a sound, vibrates, and the lights blink; then release the button.

11

FR

EN

DE

NL

IT

ES

PT

Contents of your box

Your Weenect Cats pack includes:

1 - a Weenect Cats GPS tracker

2 - an attachment system

3 - a charging base

4 - a USB cable

Tracker

1 – Yellow Lights

2 – Blue Lights

3 - On/O button

4 – Charging connectors

5 – Microphone

6 - Speaker

12

FR

EN

DE

NL

IT

ES

PT

Charge the tracker

Charging base

To charge your tracker, use the charging base provided, ensuring

that it is connected to a power source via the USB cable.

Tracker

Blue light: This light appears when the tracker is charging on its

base and disappears when it is fully charged.

Modes

To further optimize the life of your battery, we oer 3 dierent

usage modes for the tracker. These modes change the interval

during which the tracker sends its position.

You can change the tracker’s mode remotely directly from the

mobile app.

“Real time” mode: the tracker sends its position automatically

every 10 seconds. Battery life: up to 12 hours.

“Daily” mode: the tracker sends its position every 5 minutes

when stopped and every minute when moving. Battery life: up

to 36 hours.

“Standby” mode: the tracker is turned on but does not send any

13

FR

EN

DE

NL

IT

ES

PT

position and the GPS is turned off. You can request the position

from time to time using the refresh button or change the mode

to locate it. Battery life: up to 4 days.

Tracker operation

Turn the tracker on/o

To turn the tracker on: Always turn the tracker on outside. To do

so, press the On/O button for 3 seconds until the tracker emits

a sound and vibrates and the lights blink, then release the but-

ton.

To turn the tracker o: Press the On/O button three consecu-

tive times. The tracker will then beep twice and turn o.

Lights

GPRS indicator (yellow light): The yellow light indicates a con-

nection to the server, which is essential for receiving the tracker’s

positions.

Once the yellow light stabilizes and blinks like a heartbeat (two

blinks/stops, etc.), this means that your tracker is connected to

the network.

14

FR

EN

DE

NL

IT

ES

PT

GPS indicator (blue light): When the blue light blinks, this in-

dicates that the GPS signal is good. If it does not blink, please

move the tracker close to a window or put it outside to capture

GPS signals.

Assistance

See answers to frequently asked questions by visiting the help

center at weenect.zendesk.com

You will also nd a complete user’s guide, as well as tutorial

videos. To contact us, use the contact form from the help center.

Standard precautions

Immersion in water: the tracker is designed to resist splashes

and rain when covered by its protective case, but not to be sub-

merged in water under any circumstances.

Charging the tracker: always use the charging base and USB ca-

ble provided to recharge your tracker. Never force the plug into

the port on the charging unit; if you cannot insert the plug, make

sure it is positioned in the right direction.

Handling the tracker: never open the tracker unit and do not try

to repair it yourself at the risk of voiding the warranty. In case of

15

FR

EN

DE

NL

IT

ES

PT

malfunction, contact customer service.

Working temperatures: the tracker is designed to work at tem-

peratures between -20°C and 55°C. Low or high temperatures

could damage it.

Warranty

Trackers are covered by a two-years manufacturer’s warran-

ty. This warranty covers tracker malfunction so long as it is not

caused by an impact or breakage or failure to follow the usage

instructions. To claim under the warranty, the customer must

have a subscription and payments must be up to date. If the du-

ration of the warranty does not comply with applicable law, it

will be extended to the minimum duration required by law.

IMPORTANT

Notications

To receive push notications in the mobile application, you

need to accept these both in your telephone’s settings and in

the « Weenect » application settings. Your telephone also needs

to be connected to the internet (3G or WiFi). Notications are

also available via email and text message (optional).

16

FR

EN

DE

NL

IT

ES

PT

Zone entry and exit notications

Certain conditions (indoors, buildings, trees, etc.) may interfere

with the GPS signal. To avoid false alarms, we ensure that the

tracker denitely is moving before sending notications, and

consequently zone exit notications are triggered a few minutes

after the tracker actually leaves the zone.

Augmented reality/compass

The direction and distance shown by these functions are calcu-

lated using the dierence between your telephone’s GPS posi-

tion and the tracker’s last GPS position. The margin of error of

these two positions aects the result if the tracker is close to

your telephone, giving the wrong direction and distance. Please

use these functions when the tracker is far away from you.

Page is loading ...

Weenect CATS User manual

Weenect CATS User manual

in other languages

Other documents