Eagle Group M1860 Installation guide
- Category
- Multimedia carts & stands
- Type
- Installation guide
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EG01.44 Rev. 05/10
Catalog Specification Sheet No.
EG01.44
Angled Shelf/Visual Merchandising Carts
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Short Form Specifications
Eagle Angle Shelf/Visual Merchandising Cart, model
______________. (EAGLEbrite
®
Zinc, Chrome, Black Epoxy,
Valu-Master
®
Gray Epoxy, Valu-Gard
®
Green Epoxy) reverse
mat angled wire shelves with hangar rails. 3-sided truss
assembly at top and bottom for increased strength.
(EAGLEbrite
®
Zinc, Chrome Plated) posts with 5˝-diameter
resilient wheel casters.
Options / Accessories
Additional angled shelves
Dividers
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
®
, and Retail Display are divisions of Eagle Group. ©2010 by the Eagle Group
Item No.:
Project No.:
S.I.S. No.:
Angled Shelf/
Visual Merchandising Carts
Specification Sheet
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
For custom configuration or fabrication needs, contact our SpecFAB
®
Division.
MODELS:
M1824*-4
M1836*-4
M1848*-4
M1860*-4
M1824*
LR24-*
LR36-*
LR48-*
LR60-*
Certifications / Approvals
3TF1836-*
3TF1848-*
3TF1860-*
M18*
M1836*
M1848*
M1860*
WR18-*
* See charts on back for complete model numbers.
angled shelf/visual merchandising cart
Design and Construction Features
• Prepackaged units include four shelves and four posts with
swivel casters.
• Easy assembly without the use of any tools.
• Entire unit stabilized at the top and bottom with
three-sided truss reinforcement braces for increased
strength and rigidity.
• Optional dividers and additional shelves are available to suit
any application.
Shelves
• Open wire design reduces dirt and dust buildup.
• Each shelf adjustable on 1˝ (25mm) vertical increments.
• Shelf slope, adjustable from 0° to 30° by simply raising
or lowering front and back truss brace, attributes to
product visibility.
• Shelves are reversible, allowing for smaller items to be
displayed at front of shelves if desired.
Posts
• 1˝ (25mm)-diameter 16 gauge steel tubular wall ensures
structural strength and stability in any use.
• Grooved at 1˝ (25mm) increments to allow for adjustment
of shelves.
Casters
• Constructed of heavy duty plated ball bearing die-casting.
• 5˝ (127mm)-diameter, 1
1
⁄4˝ (32mm)-wide resilient wheel.
• Swivel casters, two with brake.
• 3
1
⁄2˝ (89mm)-diameter donut bumper.
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Catalog Specification Sheet No.
EG01.44
Item No.:
Project No.:
S.I.S. No.:
Rev. 05/10
Printed in U.S.A.
©2010 by Eagle Group
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Angled Shelf/Visual Merchandising Carts
FRONT VIEW SIDE VIEW
Shelves can be reversed, turning the 3˝ front upturn into
a 1˝ front upturn. This allows smaller items to be
displayed at front of shelves if desired.
REVERSIBLE SHELVING!
Angled Shelves
Hanger rails included.
Options and Components
EAGLEbrite
®
chrome black Valu-Master
®
Valu-Gard
®
length weight
model # model # model # model # model # in. mm lbs. kg
M1824Z-4 M1824C-4 M1824BL-4 M1824V-4 M1824VG-4 24˝ 610 52 23.6
M1836Z-4 M1836C-4 M1836BL-4 M1836V-4 M1836VG-4 36˝ 914 60 27.2
M1848Z-4 M1848C-4 M1848BL-4 M1848V-4 M1848VG-4 48˝ 1219 68 30.8
M1860Z-4 M1860C-4 M1860BL-4 M1860V-4 M1860VG-4 60˝ 1524 76 34.5
length weight
model # in. mm lbs. kg
M1824* 24˝ 610 4 1.8
M1836* 36˝ 914 9 4.1
M1848* 48˝ 1219 12 5.5
M1860* 60˝ 1524 17 7.7
Shelf Dividers
length weight
model # in. mm lbs. kg
M18* 18˝ 457 1.0 0.5
Hanger Rails
length weight
model # in. mm lbs. kg
LR24-* 24˝ 610 1.5 0.7
LR36-* 36˝ 914 1.9 0.9
LR48-* 48˝ 1219 2.1 1.0
LR60-* 60˝ 1524 2.5 1.1
WR18-* 18˝ 457 0.7 0.3
length weight
model # in. mm lbs. kg
3TF1836-* 36˝ 914 3.5 1.6
3TF1848-* 48˝ 1219 4.0 1.8
3TF1860-* 60˝ 1524 4.5 2.0
Note: 18˝ (457mm) rails are front-to-back
hanger rails. All others are used side-to-side.
Note: 4-Sided Truss Frames also available.
To order, replace suffix “ 3TF” with “4TF”.
Example: 4TF1848-Z
3-Sided Truss Frames
* To specify finish, place the corresponding suffix after the model number.
suffix “Z” = EAGLEbrite
®
zinc suffix “BL” = Black epoxy
(not available for #M18) suffix “V” = Valu-Master
®
gray epoxy
suffix “C” = Chrome suffix “VG” = Valu-Gard
®
green epoxy
Angled Shelf/Visual Merchandising Carts
-
1
-
2
Eagle Group M1860 Installation guide
- Category
- Multimedia carts & stands
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Eagle Group SDM1436C Datasheet
-
-
-
-
-
-
-
-
-