LG 37LH200C Owner's manual

담 당

관리자

Model Description

MODEL

BRAND

Printing Specification

1. Trim Size (Format) : 185mm x 260 mm

2. Printing Colors

• Cover : 1 COLOR (BLACK)

• Inside : 1 COLOR (BLACK)

3. Stock (Paper)

• Cover : Coated paper , Snow White 150 g/㎡

• Inside : Uncoated paper , 백상지 60 g/㎡

4. Printing Method : Off-set

5. Bindery : Perfect bind

6. Language : English (1)

7. Number of pages : 100pages

Part No.

1.

2.

User’s Guide Specification

Changes

4.

REV.

NO.

MM/DD/YY

SIGNATURE

CHANGE NO.

CHANGE CONTENTS

SUFFIX

LG

MFL59868613

(0911-REV04)

(1) Origin Notification

* LGEIN: Printed in Indonesia * LGEWA : Printed in U.K.

* LGESP : Printed in Brazil * LGEMX : Printed in Mexico

* LGEND/NP : Printed in China * LGEIL : Printed in India

* LGEMA : Printed in Poland

Special Instructions

3.

Product Name

H6_LCD models

1

2

3

4

5

7

6

8

MJ HONG

09.11.04

KIM JO

09.11.04

This part contains Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,

Details should be followed Eco-SCM management standard[LG(56)-A-2524].

Especially, Part should be followed and controlled the following specification.

(1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production.

(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.

Notes

26/32/37/42LH220C-TA

26/32/37/42LH220C

Jul./24/09

SG KIM

S9-58736

Applied the PQ test results of 26/32/37/42LH210C-TA.

Sep./02/09

SG KIM

Added the accessories of Dual Lock.S9-61102

Sep./16/09

SG KIM

Added some sentences of USB device.S9-62166

Nov./18/09

MJ HONG

S9-67119

Added the Model name.

(26/32/37/42LH220C-TA)

Pagination sheet

P/NO. MFL59868613

Total pages :

100 pages

LG(EN)

P/no

LG(EN)

Blank

Back cover

Blank

1

…. …..

Front cover

96

OWNER’S MANUAL

LCD TV MODELS

2266LLHH22******

3322LLHH22******

3377LLHH22******

4422LLHH22******

LCD TV

Please read this manual carefully before operating

your TV.

Retain it for future reference.

Record the model number and serial number of the

TV.

Refer to the label on the back cover and quote this

information.

To your dealer when requiring any service.

ENGLISH

PP//NNOO:: MMFFLL5599886688661133((00991111--RREEVV0044))

PPrriinntteedd iinn KKoorreeaa

HDMI, the HDMI logo and High-Definition

Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC.

1

ACCESSORIES

Ensure that the following accessories are included with your TV.

If an accessory is missing, please contact the dealer where you purchased the TV.

■

Here shown may be somewhat different from your TV.

Owner’s Manual Batteries

Remote ControlPower Cord

Polishing Cloth

Polishing cloth for use on the screen.

This item is not included for all models.

* Lightly wipe any stains or fingerprints on

the surface of the TV with the polishing

cloth.

AV MODEV MODE

ENERGYENERGY SA SAVINGVING

RETURN

MENU

Q.MENU

MARK

MUTEMUTE

POWERPOWER

LISTLIST

Q.VIEWQ.VIEW

RARATIOTIO

FAV

AV MODE

ENERGY SAVING

MUTE

LIST

Q.VIEW

Bolts for stand assembly

(Refer to p.6)

x 4

Protection cover

(Refer to p.7)

1-screw for stand fixing

(Refer to p.6)

Wall Mounting Bracket(Separate purchase)

RW230

(26/32LH2***)

AW-47LG30M

(32/37/42LH2***)

Protective Bracket and

Bolt for Power Cord

(Refer to p.6)

Do not use excessive force. This may

cause scratching or discolouration.

Dual Lock™

(

This item is not included

for all models.

)

(Refer to P.7)

CONTENTS

2

CONTENTS

ACCESSORIES

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

PREPARATION

Front Panel Controls..................................................... 4

Back Panel Information ................................................ 5

Stand Installation........................................................... 6

Not Using the desk-type stand...................................6

Attaching the TV to a desk...........................................6

How to secure the power cable................................. 6

Back Cover for Wire Arrangement ............................ 7

Swivel Stand ................................................................... 7

How to use Dual Lock™.............................................. 7

Careful Installation Advice........................................... 8

Desktop Pedestal Installation ..................................... 8

Wall Mount: Horizontal Installation .......................... 9

Kensington Security System ....................................... 9

Antenna Connection................................................... 10

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup ...................................................... 11

DVD Setup......................................................................14

VCR Setup.......................................................................16

Other A/V Source Setup........................................... 18

USB In Setup ................................................................ 19

Speaker Output Setup............................................... 19

PC Setup........................................................................ 20

- Screen Setup for PC Mode .............................. 22

WATCHING TV / PROGRAMME CONTROL

Remote Control Key Functions ............................... 26

Turning on the TV....................................................... 28

Programme Selection ................................................ 28

Volume Adjustment .....................................................28

Quick Menu ................................................................. 29

On-Screen Menus Selection and Adjustment..... 30

Auto Programme Tuning ............................................ 31

Manual Programme Tuning ....................................... 32

Programme Edit ........................................................... 34

Selecting the Programme List.................................. 36

Favourite Programme Setup...................................... 37

Input List........................................................................ 38

Input Label .................................................................... 39

................................................................. 40

Key Lock......................................................................... 43

Initializing(Reset to original factory settings) ..... 44

AV Mode........................................................................ 45

TO USB A USB DEVICE

When connecting the USB device.......................... 46

Photo List ...................................................................... 48

Music List....................................................................... 52

Movie List ...................................................................... 55

Divx Registration Code.............................................. 58

Deactivation.................................................................. 59

PICTURE CONTROL

Picture Size (Aspect Ratio) Control ...................... 60

Energy Saving ............................................................... 62

Preset Picture Settings

- Picture Mode-Preset............................................ 63

Manual Picture Adjustment

- Picture Mode-User option................................. 64

Picture Improvement Technology........................... 65

Expert Picture Control................................................66

Picture Reset................................................................. 69

Power Indicator .............................................................69

Demo Mode.................................................................. 70

SOUND & LANGUAGE CONTROL

Auto Volume Leveler................................................... 71

Preset Sound Settings - Sound Mode................... 72

Sound Setting Adjustment - User Mode.............. 73

SRS TruSurround XT .................................................. 73

Clear Voice ll................................................................. 74

Balance........................................................................... 75

CONTENTS

3

Audio Reset....................................................................76

I/II

- Stereo/Dual Reception ....................................... 77

- NICAM Reception.............................................................. 78

- Speaker Sound Output Selection.................... 78

On-Screen Menu Language Selection......................... 79

TIME SETTING

Clock Setup .................................................................. 80

Auto On/ Off Timer Setting..................................... 81

Sleep Timer Setting .................................................... 82

TELETEXT

Switch on/off................................................................ 83

SIMPLE Text .................................................................. 83

TOP Text........................................................................ 83

FASTEXT........................................................................ 84

Special Teletext Functions ........................................ 84

APPENDIX

Troubleshooting........................................................... 85

Maintenance ................................................................ 87

Product Specifications............................................... 88

IR Codes........................................................................ 89

External Control Device Setup .................................90

PREPARATION

4

PREPARATION

FRONT PANEL CONTROLS

■

Here shown may be somewhat different from your TV.

Only 32/37/42LH2***

INPUT

MENU

P

OK

PROGRAMME

VOLUME

OK

Only 26LH2***

MENU

POWER

INPUT

MENU

OK

P

PROGRAMME

VOLUME

OK

MENU

INPUT

POWER

Remote Control Sensor

Power/Standby Indicator

• Illuminates red in standby mode.

•

Illuminates blue when the TV is switched on.

This is a simplified representation of the front panel.

5

PREPARATION

BACK PANEL INFORMATION

■

Here shown may be somewhat different from your TV.

L( MONO)

R

AUDIO

VIDEO

VARIABLE AUDIO OUT

ANTENNA IN

L( MONO)

R

AUDIO

VIDEO

VARIABLE AUDIO OUT

ANTENNA

IN

1

AUDIO

VIDEO

L(L(MONO)MONO)

R

AUDIOAUDIO

AV IN

SPEAKER OUT

VIDEOVIDEO

VOLUMEVOLUME

CONTROLCONTROL

STEREO\STEREO\

(8 ) (8 )

ANTENNA

IN

RGB IN

(PC)

RS-232C IN

(CONTROL&SERVICE)

AUDIO IN

(RGB/DVI)

RJP

INTERFACE

AUDIO

OUT

1

2

/DVI IN

COMPONENT IN

6

3

2

4

8

10

7

Power Cord Socket

This TV operates on an AC power. The voltage is

indicated on the Specifications page. Never

attempt to operate the TV on DC power.

HDMI Input

Connect a HDMI signal to HDMI IN.

Or DVI(VIDEO)signal to HDMI/DVI port with DVI

to HDMI cable.

RS-232C IN PORT

Connect to the RS-232C port on a PC.

This port is used for Service or Hotel mode.

RGB Input

Connect the output from a PC.

RGB/DVI Audio Input

Connect the audio from a PC.

Audio Output

Connect to the Home Theater.(or amp)

RJP INTERFACE

Connect control line (RJ45) for RJP(Remote Jack pack)

Component Input

Connect a component video/audio device to these

jacks.

Audio/Video Input

Connect audio/video output from an external

device to these jacks.

SPEAKER OUTPUT(STEREO)

The phone socket for external speaker is on this

jack

Antenna Input

Connect RF antenna to this jack.

USB IN Input

Connect USB storage device to this jack.

1

2

3

4

5

6

8

9

10

11

7

5

11

L(MONO)

R

AUDIO

VIDEO

VOLUME

CONTROL

STEREO\

(8 )

ANTENNA

IN

USB IN

12

9

6

PREPARATION

STAND INSTALLATION

■

Here shown may be somewhat different from your TV.

When assembling the desk type stand, check whether the

bolt is fully tightened. (If not tightened fully, the product

can tilt forward after the product installation.) If you tight-

en the bolt with excessive force, the bolt can deviate from

abrasion of the tightening part of the bolt.

1

2

3

Carefully place the TV screen side down on a cushioned

surface to protect the screen from damage.

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in the

back of the TV.

ATTACHING THE TV TO A

DESK

■

Here shown may be somewhat different from your TV.

The TV must be attached to desk so it cannot be pulled

in a forward/backward direction, potentially causing

injury or damaging the product. Use only an attached

screw.

1-Screw (provided as parts of the product)

Desk

Stand

WARNING

!

G

To prevent TV from falling over, the TV should be

securely attached to the floor/wall per installation

instructions. Tipping, shaking, or rocking the

machine may cause injury.

PROTECTIVE BRACKET

Bolt

Secure the power cable with the PROTECTIVE BRACKET and

the bolt as shown. It will help prevent the power cable from

being removed by accident.

HOW TO SECURE THE

POWER CABLE

■

Here shown may be somewhat different from your TV.

When installing the wall-mounted unit, use the pro-

tection cover.

NOT USING THE DESK-TYPE

STAND

Insert the

PPRROOTTEECCTTIIOONN CCOOVVEERR

into the TV until

clicking sound.

7

PREPARATION

BACK COVER FOR WIRE

ARRANGEMENT

■

Here shown may be somewhat different from your TV.

Connect the cables as necessary.

To connect additional equipment, see the External

Equipment Setup section of the manual.

1

Open the

CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP

as

shown and manage the cables.

2

CABLE MANAGEMENT CLIP

Fit the

CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP

as shown.

3

GG

Do not hold the CABLE MANAGEMENT CLIP

when moving the TV.

- If the TV is dropped, you may be injured or the

TV may be damaged.

NOTE

!

HOW TO USE DUAL LOCK™

(This feature is not available for all

models.)

Fix the set-top box to the TV and use it when you

want to.

After removing the protection paper from the

Dual Lock, stick it to the TV and the set-top

box as shown.

Attach the set-top box to the TV by pressing the

Velcro strips together.

SWIVEL STAND

■

This feature is not available for all models.

■

After installing the TV, you can adjust the TV manually

to the left or right direction by 20 degrees to suit your

viewing position.

1

2

8

PREPARATION

A

The TV can be installed in various ways such as on

a wall, or on a desktop etc.

A

The TV is designed to be mounted horizontally.

Power Supply

Circuit breaker

EARTHING

Ensure that you connect the earth wire to prevent pos-

sible electric shock. If grounding methods are not pos-

sible, have a qualified electrician install a separate cir-

cuit breaker.

Do not try to earth the TV by connecting it to tele-

phone wires, lightening rods or gas pipes.

4 inches

DESKTOP PEDESTAL INSTALLATION

For adequate ventilation allow a clearance of 4”

(10cm) all around the TV.

CAREFUL INSTALLATION ADVICE

A

You should purchase necessary components to fix the TV

safety and secure to the wall on the market.

A

Position the TV close to the wall to avoid the possibility

of it falling when pushed.

A

The instructions shown below are a safer way to set up

the TV, by fixing it to the wall, avoiding the possibility of

it falling forwards if pulled. This will prevent the TV from

falling forward and causing injury. This will also prevent

the TV from damage. Ensure that children do not climb or

hang from the TV.

NOTE

!

G

When moving the TV undo the cords first.

G

Use a platform or cabinet strong and large enough to

support the size and weight of the TV.

G

To use the TV safely make sure that the height of the

bracket on the wall and on the TV is the same.

3

1

2

Use the eye-bolts or TV brackets/bolts to fix the prod-

uct to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen then

bolts.)

* Insert the eye-bolts or TV brackets/bolts and tight-

en them securely in the upper holes.

Secure the wall brackets with the bolts on the wall.

Match the height of the bracket that is mounted on the

wall.

3

Use a sturdy rope to tie the product for alignment. It

is safer to tie the rope so it becomes horizontal

between the wall and the product.

2

1

2

1

9

PREPARATION

WALL MOUNT: HORIZONTAL

INSTALLATION

A

We recommend the use of a LG Brand wall mounting

bracket when mounting the TV to a wall.

A

We recommend that you purchase a wall mounting

bracket which supports VESA standard.

A

LG recommends that wall mounting be performed

by a qualified professional installer.

4 inches

NOTE

!

G Should Install wall mount on a solid wall perpendicular to

the floor.

G Should use a special wall mount, if you want to install it to

ceiling or slanted wall.

G The surface that wall mount is to be mounted on should be

of sufficient strength to support the weight of TV set; e.g.

concrete, natural rock, brick and hollow block.

G Installing screw type and length depends on the wall mount

used. Further information, refer to the instructions included

with the mount.

G LG is not liable for any accidents or damage to property or

TV due to incorrect installation:

- Where a non-compliant VESA wall mount is used.

- Incorrect fastening of screws to surface which may cause

TV to fall and cause personal injury.

- Not following the recommended Installation method.

Model

VESA

(A

*

B)

Standard

Screw

Quantity

42LH2***

37LH2***

32LH2***

26LH2***

200

*

200

*

200

*

10 0

200

*

10 0

M6

M4

4

BB

AA

KENSINGTON SECURITY SYSTEM

■

This feature is not available for all models.

■

Here shown may be somewhat different from your TV.

The TV is equipped with a Kensington Security System

connector on the back panel. Connect the Kensington

Security System cable as shown below.

For the detailed installation and use of the Kensington

Security System, refer to the user’s guide provided

with the Kensington Security System.

For further information, contact http://www.kensing-

ton.com, the internet homepage of the Kensington

company. Kensington sells security systems for expen-

sive electronic equipment such as notebook PCs and

LCD projectors.

NOTE

- The Kensington Security System is an optional accessory.

NOTES

a. If the TV feels cold to the touch, there may be a

small “flicker” when when it is turned on.

This is normal, there is nothing wrong with TV.

b. Some minute dot defects may be visible on the

screen, appearing as tiny red, green, or blue spots.

However, they have no adverse effect on the moni-

tor's performance.

c. Avoid touching the LCD screen or holding your finger(s)

against it for long periods of time.

Doing so may produce some temporary distortion

effects on the screen.

L(MONO)

R

AUDIO

VIDEO

VARIABLE AUDIO OUT

ANTENNA

IN

L(MONO)

R

AUDIO

VIDEO

VARIABLE AUDIO OUT

ANTENNA

IN

L( MONO)

R

AUDIO

VIDEO

VARIABLE AUDIO OUT

ANTENNA IN

L( MONO)

R

AUDIO

VIDEO

VARIABLE AUDIO OUT

ANTENNA

IN

10

PREPARATION

ANTENNA CONNECTION

■

For optimum picture quality, adjust antenna direction.

■

An antenna cable and converter are not supplied.

■

To prevent damage do not connect to the mains outlet until all connections are made between the devices.

Multi-family Dwellings/Apartments

(Connect to wall antenna socket)

Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna)

Outdoor

Antenna

(VHF, UHF)

Wall

Antenna

Socket

RF Coaxial Wire (75 ohm)

Antenna

UHF

Signal

Amplifier

VHF

■

In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the

antenna as shown above.

■

If signal needs to be split for two TVs, use an antenna signal splitter for connection.

11

EXTERNAL EQUIPMENT SETUP

1

/DVI IN

2

COMPONENT IN

AUDIO

VIDEO

RGB IN

(PC)

A

S

VIDEO

C

AUDIO IN

(RGB/DVI)

HD RECEIVER SETUP

■

To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.

■

Here shown may be somewhat different from your TV.

Connecting with a component cable

1

2

Signal

480i/576i

480p/576p

720p/1080i

1080 p

Component

O

(50/60Hz only)

HDMI

X

O

(24Hz/30Hz/50Hz/60Hz)

Connect the video outputs

(

Y, PB, P

R

)

of the digital set

top box to the

CCOOMMPPOONNEENNTT IINN VVIIDDEEOO

jacks on the

TV.

Connect the audio output of the digital set-top box to

the

CCOOMMPPOONNEENNTT IINN AAUUDDIIOO

jacks on the TV.

Turn on the digital set-top box.

(

Refer to the owner’s manual for the digital set-top box.

)

Select

CCoommppoonneenntt

input source using the

IINNPPUUTT

button on the remote control.

2

3

4

1

12

EXTERNAL EQUIPMENT SETUP

Connecting a set-top box with an HDMI cable

Connect the digital set-top box to

HHDDMMII//DDVVII IINN 11

or

HHDDMMII22

jack on the TV.

Turn on the digital set-top box.

(

Refer to the owner’s manual for the digital set-top

box.

)

Select

HHDDMMII11

or

HHDDMMII22

input source using the

IINNPPUUTT

button on the remote control.

2

3

1

GG

Check that your HDMI cable is version 1.3 or higher.

If the HDMI cables don’t support HDMI version 1.3, flick-

ering or no screen display can result. Please use the latest

cables that support at least HDMI version 1.3.

GG

We recommed less than 10m for HDMI cable, and recom-

mend to use amplifier or repeater for more than that.

NOTE

!

COMPONENT IN

VIDEO

LYP

B

P

R

AUDIO

RGB IN

(PC)

1

2

/DVI IN

RS-232C IN

(CONTROL&SERVICE)

VIDEO

AUDIO I

(RGB/DV

1

13

EXTERNAL EQUIPMENT SETUP

Connecting with an HDMI to DVI cable

Connect the digital set-top box to

HHDDMMII//DDVVII IINN 11

jack on the TV.

Connect the audio output of the digital set-top box to the

AAUUDDIIOO IINN ((RRGGBB//DDVVII))

jack on the

TV.

Turn on the digital set-top box.

(

Refer to the owner’s manual for the digital set-top box.

)

Select

HHDDMMII11

input source using the

IINNPPUUTT

button on the remote control.

2

3

4

1

COMPONENT IN

VIDEO

LYP

B

P

R

AUDIO

RGB IN

(PC)

1

/DVI IN

2

L(MONO)

R

AUDIO

AV IN

SPEAKER OUT

VIDEO

VOLUME

CONTROL

STEREO\

(8 )

ANTENNA

IN

AUDIO IN

(RGB/DVI)

RJP

INTERFACE

AUDIO

OUT

RS-232C IN

(CONTROL&SERVICE)

1

2

14

EXTERNAL EQUIPMENT SETUP

DVD SETUP

Connecting with a component cable

1

/DVI IN

2

COMPONENT IN

AUDIO

VIDEO

RGB IN

(PC)

A

S

VIDEO

V

C

AUDIO IN

(RGB/DVI)

RS-232C IN

(CONTROL&SERVICE)

Component Input ports

To achieve better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

YPB PR

Video output ports

on DVD player

Y

P

B

B-Y

Cb

Pb

PR

R-Y

Cr

Pr

1 2

Connect the video outputs

(

Y, P

B, PR

)

of the DVD to the

CCOOMMPPOONNEENNTT IINN VVIIDDEEOO

jacks on the TV.

Connect the audio outputs of the DVD to the

CCOOMMPPOONNEENNTT IINN AAUUDDIIOO

jacks on the TV.

Turn on the DVD player, insert a DVD.

Select

CCoommppoonneenntt

input source using the

IINNPPUUTT

button on the remote control.

Refer to the DVD player's manual for operating instructions.

2

3

4

5

1

15

EXTERNAL EQUIPMENT SETUP

Connecting the HDMI cable

Connect the HDMI output of the DVD to the

HHDDMMII//DDVVII IINN 11

or

HHDDMMII22

jack on the TV.

Select

HHDDMMII11

or

HHDDMMII22

input source using the

IINNPPUUTT

button on the remote control.

Refer to the DVD player's manual for operating instructions.

2

3

1

GG

The TV can receive video and audio signals simultaneously when using a HDMI cable.

GG

If the DVD does not support Auto HDMI, you must set the output resolution appropriately.

GG

Check that your HDMI cable is version 1.3 or higher.

If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the

latest cables that support at least HDMI version 1.3.

GG

We recommed less than 10m for HDMI cable, and recommend to use amplifier or repeater for more than

that.

NOTE

!

COMPONENT IN

VIDEO

LYP

B

P

R

AUDIO

RGB IN

(PC)

1

2

/DVI IN

RS-232C IN

(CONTROL&SERVICE)

VIDEO

AUDIO

(RGB/D

1

16

EXTERNAL EQUIPMENT SETUP

VCR SETUP

■

To avoid picture noise (interference), allow adequate distance between the VCR and TV.

ANTENNA

IN

OUTPUT

SWITCH

ANT IN

R

S-VIDEO VIDEO

ANT OUT

L

COMPONENT IN

VIDEO

LYP

B

P

R

AUDIO

RGB IN

(PC)

L(MONO)

R

AUDIO

AV IN

SPEAKER OUT

VIDEO

VOLUME

CONTROL

STEREO\

(8 )

AUDIO IN

(RGB/DVI)

RJP

INTERFACE

AUDIO

OUT

1

/DVI IN

2

RS-232C IN

(CONTROL&SERVICE)

Wall Jack

Antenna

1

2

Connecting with a RF Cable

Connect the

AANNTT OOUUTT

socket of the VCR to the

AANNTTEENNNNAA IINN

socket on the TV.

Connect the antenna cable to the

AANNTT IINN

socket of the VCR.

Press the

PPLLAAYY

button on the VCR and match the appropriate channel between the TV and VCR for viewing.

2

3

1

Page is loading ...

LG 37LH200C Owner's manual

This manual is also suitable for

LG 37LH200C Owner's manual

Related papers

Other documents