GE ATS1192 Owner's manual

GE
Brand
GE
Model
ATS1192
Type
Owner's manual

This manual is also suitable for

© 2005 GE Security B.V. MAINST-ATS1190
All rights reserved 09/2005
ATS1190 ATS1192
Smart Card Reader
INTRODUCTION
The ATS1190/1192 Smart Card Reader is a multifunction, all-
purpose proximity card reader suitable for all locations requiring a
short-range reader. The reader can be connected directly to the
ATS Control Panel (see figure
Y). It is configurable through a
Menu system accessible via the BUS or by Configuration cards
programmed through Titan and the Smart Card Programmer
(ATS1621/22) or the ATS1481 Programming card.
The reader operates from 9 to 14 VDC. It has a quiescent current
consumption of less than 25 mA and less than 80 mA when
reading a card. The ATS1190 is supplied standard with a white
removable dress cover, which can be interchanged with one of
four other colours available.
The ATS1192 is a heavy-duty version designed for standard door
frames.
Both the ATS1190 & ATS1192 are waterproof.
Figure
: Smart Card Reader
Blue LED: Door open Red LED: Door open
Disarmed Armed
MOUNTING
The reader can be mounted on any flat surface by two pan head
screws, 3.0-3.5 mm diameter, located under the dress cover. A
slightly reduced range will be experienced when mounted on metal
surfaces. If mounting in an outdoor environment, ensure that the
blue LED is at the top.
It is not recommended to use countersunk screws.
For the ATS1190 the dress cover can be removed to expose the
mounting screw by gently prizing the sides away from the main
body to release the retaining clips and gently pulling on the
connection cord. Do not use excessive force or the reader can be
irreparably damaged.
After mounting, gently press the cover over the main body until it
locks into place.
RAS ADDRESSING
The address of the reader for BUS operations is set to the default
address RAS 16. Using a configuration card or accessing its on-
line Menu system when connected to the RS485 BUS can change
this. See the Programming Guide, Reader Address, for further
details.
TAMPER
The reader is provided with a Tamper facility. When connected to
the BUS, Tamper data is transmitted to the Advisor Master with
system data. An external Open Collector output (violet wire) can
be configured as a Tamper control for both online and offline
operation.
READER WIRING
Red: Positive 9 to 14 VDC supply
Black: 0 Volts DC supply ground
Green:
D0 / D-
Clock
RS485 Data - Wiegand Data 0
Absolute maximum, 12 V @ 10 mA
White:
D1/ D+
Data
RS485 Data + Wiegand Data 1
Absolute maximum, 12 V @ 10 mA
Brown: LED 1
Offline LED control configured to "Two Wire
Control" will control the red LED only
Wire grounded: Red LED on
Wire open: Red LED off
Wire at +5 V to +12 V: Red LED off or, offline
LED control configured to "One Wire Control"
will control both the red and blue LED’s
Wire grounded: Blue LED on
Wire open circuit: Both LED’s off
Wire at + 5 V to 12 V: Red LED on
Absolute maximum, 14 V
ATS1190/1192
Smart Card Reader
ATS1190/1192 ATS1105 ATS1170 ATS2000/3000/4
000
ATS1250/1260 ATS1250/1260
localbus
Cable J2 J1 J1 Door 1, 2, 3, 4 Comms
Red 12V 12V 12V 12V 12V
Black 0V 0V 0V 0V 0V
Green D0 D0 D- D0 D-
White D1 D1 D+ D1 D+
Yellow - L2 - L2 -
Brown - L1 - L1 -
Blue - BZ - BZ -
Violet - - -
With 4K7 (in series)
to Alarm Input 3
-
Y
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
11
Technical
specifications
Specifications
techniques
Technische
specificaties
Specifiche
tecniche
Dane techniczne
Supply Voltage
(nominal)
Tension
d’alimentation
Voedingsspanning Tensione di
alimentazione
(nominale)
Napięcie zasilania
(nomianlne)
9 – 14 V
(12 V )
Current consumption Consommation Stroomverbruik Consumo di corrente
A riposo
In lettura
Pobór prądu –
oczekiwanie
Pobór prądu –
czytanie karty
25 mA max
80 mA max
Dimensions (W x H x
D)
Dimensions (L x H x
P)
Afmetingen (B x H x
D)
Dimensioni (l × h ×
p)
ATS1190
ATS1192
Wymiary zewnętrzne
(SxWxG):
ATS1190
ATS1192
36mm x 110mm x
20mm
42mm x 150mm x
16mm
Operating
temperature
Température
ambiante
Bedrijfstemperatuur Temperatura di
esercizio
Temperatura pracy -35°C to +66°C
IMQ tested Certificato IMQ Certyfikowana IMQ +5°C to +40°C
IP rating Indice IP de
protection
IP beveiligingsklasse
Grado di protezione
IP
Klasa odporności
obudowy
IP54
IMQ tested
Certificato IMQ IP30
Humidity Non
condensing
Humidité Vochtigheidsgraad
condensvrij
Umidità senza
condensa
Wilgotność powietrza 93%.
Number of card
combinations
Nombre de
combinaisons de
cartes
Aantal
kaartcombinaties
Numero di
combinazioni tessera
Ilość
niepowtarzalnych
kart.
28x10
12
-48 bit
Certificato IMQ II°
livello
ATS1190
Dados técnicos Tekniske data
Especificaciones
técnicas
Tekniske
specifikationer
Tekniska data
Tensão da fonte de
alimentação
(nominal)
Strømforsyningsspen
ning
Tensión de
alimentación
Forsyningsspænding Spänningsmatning
(nominell)
9 – 14 V
(12 V )
Consumo de
corrente
Strømforbruk Consumo de
corriente
Strømforbrug Strömförbrukning 25 mA max
80 mA max
Dimensões (A x L)
(placa tamanho B)
ATS1190
ATS1192
Størrelse (H x B)
(kortstørrelse B).
ATS1190
ATS1192
Dimensiones (ancho
x alto x profundidad)
Mål (B x H x D) Mått (B × H × D)
36mm x 110mm x
20mm
42mm x 150mm x
16mm
Temperatura de
operação
Driftstemperatur Temperatura de
funcionamiento
Driftstemperatur Drifttemperatur -35°C to +66°C
IMQ-testad +5°C - +40°C
Categoria de
protecção IP
IP-klasse Grado de protección
IP
IP-Klasse
IP-klass
IP54
Humidade sem
condensação
Umidità senza
condensa
Humedad sin
condensación
Fugtighed, ingen
kondensdannelse
Luftfuktighet, ej
kondenserande
93%.
Número de
combinações de
cartão
Antall kort
kombinasjoner
Número de
combinaciones de
tarjeta
Antal af kort
kombinationer
Antal kort
kombinationer
28x10
12
-48 bit
Technische
Daten
Tekniset tiedot
Spannungsversorgu
ng
(nominal)
Syöttöjännite
(nimellinen)
9 – 14 V
(12 V
Stromaufnahme
Virrankulutus
25 mA max
80 mA max
Abmessungen (B ×
H × D)
Mitat (L x K x S)
ATS1190
ATS1192
36mm x 110mm x
20mm
42mm x 150mm x
16mm
Betriebstemperatur Käyttölämpötila
-35°C to +66°C
IMQ-geprüft IMQ-testattu
+5°C - +40°C
IP-Schutzklasse IP-luokka
IMQ-testattu
IP54
Luftfeuchtigkeit
nicht kondensierend
Suhteellinen kosteus
(tiivistymätön)
93%.
Anzahl von
Kartenkombinationen
Korttivaihtoehdot
28x1012 -48 bit
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

GE ATS1192 Owner's manual

GE
Brand
GE
Model
ATS1192
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Other documents