Dometic CoolAir SP950T Installation guide

AIR CONDITIONERS

COOLAIR

SP950T

Assembly kit for Renault Magnum/

Premium

Installation Manual . . . . . . . . . . . . . . . . . . 9

Montagesatz für Renault Magnum/

Premium

Montageanleitung . . . . . . . . . . . . . . . . . 26

Kit de montage pour Renault Magnum/

Premium

Instructions de montage. . . . . . . . . . . . . 43

Juego de montaje para

Renault Magnum/Premium

Instrucciones de montaje . . . . . . . . . . . . 60

Kit de montagem para

Renault Magnum/Premium

Instruções de montagem . . . . . . . . . . . . 77

Set di montaggio per Renault Magnum/

Premium

Indicazioni di montaggio . . . . . . . . . . . . 94

Montageset voor Renault Magnum/

Premium

Montagehandleiding . . . . . . . . . . . . . . .112

Monteringssæt til Renault Magnum/

Premium

Monteringsvejledning . . . . . . . . . . . . . 130

Monteringssats för Renault Magnum/

Premium

Monteringsanvisning . . . . . . . . . . . . . . . 147

Monteringssett for Renault Magnum/

Premium

Monteringsanvisning . . . . . . . . . . . . . . . 163

Asennussarja malleihin

Renault Magnum/Premium

Asennusohje . . . . . . . . . . . . . . . . . . . . . . 179

Монтажный комплект для

Renault Magnum/Premium

Инструкция по монтажу . . . . . . . . . . . . 195

Zestaw montażowy do

Renault Magnum/Premium

Instrukcja montażu . . . . . . . . . . . . . . . . . 213

Montážna súprava pre

Renault Magnum/Premium

Návod na montáž . . . . . . . . . . . . . . . . . . 231

Montážní sada pro vozidla

Renault Magnum/Premium

Návod k montáži. . . . . . . . . . . . . . . . . . .247

Szerelőkészlet a következőkhöz:

Renault Magnum/Premium

Szerelési útmutató . . . . . . . . . . . . . . . . 263

EN

DE

FR

ES

PT

IT

NL

DA

SV

NO

FI

RU

PL

SK

CS

HU

SP950T-Renault--I-16s.book Seite 1 Donnerstag, 6. Juli 2017 4:43 16

Page is loading ...

3

CoolAir SP950T

75

291286

1

779

2

3

SP950T-Renault--I-16s.book Seite 3 Donnerstag, 6. Juli 2017 4:43 16

CoolAir SP950T

4

9

1

2

3

4

≤ 4,2 m

5

SP950T-Renault--I-16s.book Seite 4 Donnerstag, 6. Juli 2017 4:43 16

5

CoolAir SP950T

1

2

3

4

6

SP950T-Renault--I-16s.book Seite 5 Donnerstag, 6. Juli 2017 4:43 16

CoolAir SP950T

6

9

1

2

3

4

5

10

6

8

7

134567

8

9

2

8

SP950T-Renault--I-16s.book Seite 6 Donnerstag, 6. Juli 2017 4:43 16

Page is loading ...

9

EN

CoolAir SP950T

Contents

1 Symbols and formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.1 Using the device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

2.2 Handling electrical cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

3 Conventions in this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3.1 General information on the installation manual. . . . . . . . . . . . . . . . . . . . . . . . . . 12

3.2 Target group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

4 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

6 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

7 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

7.1 Notes on installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

7.2 Removing the sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

7.3 Attaching the seal for the cab roof. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

7.4 Installing the unit in the sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

7.5 Installing the electrical supply lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

7.6 Installing supply lines to the condenser unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

7.7 Fastening the cover frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

8 Configuration of unit software . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

8.1 Starting and ending configuration mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

8.2 Menu level 1: Set temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

8.3 Menu level 2: Low voltage cut-off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

8.4 Menu level 3: Operating mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

8.5 Menu level 4: Default setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

8.6 Menu level 5: Temperature unit display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

9 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

SP950T-Renault--I-16s.book Seite 9 Donnerstag, 6. Juli 2017 4:43 16

EN

Symbols and formats CoolAir SP950T

10

1 Symbols and formats

!

A

I

2 Safety instructions

You must read the entire manual thoroughly and carefully.

We can only guarantee the reliability of the air conditioning roof unit if the

instructions are adhered to. The same applies to the prevention of injury and

damage to property.

The manufacturer accepts no liability for damage in the following cases:

• Faulty assembly or connection

• Damage to the product resulting from mechanical influences and excess

voltage

• Alterations to the product without express permission from the manufacturer

• Use for purposes other than those described in the operating manual

WARNING!

Safety instruction: Failure to observe this instruction can cause fatal or

serious injury.

CAUTION!

Safety instruction: Failure to observe this instruction can lead to injury.

NOTICE!

Failure to observe this instruction can cause material damage and impair the

function of the product.

NOTE

Supplementary information for operating the product.

SP950T-Renault--I-16s.book Seite 10 Donnerstag, 6. Juli 2017 4:43 16

11

EN

CoolAir SP950T Safety instructions

2.1 Using the device

• The freedom of movement of semi-trailers (of the outer edges of the semi-

trailer when turning or jackknifing) and other vehicle attachments must not be

restricted.

• Only use the air conditioning roof unit for the purpose specified by the

manufacturer and do not make any alterations or structural changes to the

device.

• Do not use the air conditioning roof unit if it is visibly damaged.

• The air conditioning roof unit must be installed safely so that it cannot tip over

or fall down.

• Installation, maintenance and repair work may only be carried out by

qualified personnel from a specialist company who are familiar with the

risks involved and the relevant regulations.

• Do not use the air conditioning roof unit near flammable fluids and gases.

• Do not operate the air conditioning roof unit if the ambient temperature is

below 0 °C.

• Do not undo the upper cover of the air conditioning roof unit in the event of

a fire. Use approved extinguishing agents instead. Do not use water to

extinguish fires.

• Please inquire from your vehicle manufacturer whether the height entered in

your vehicle documentation needs to be altered due to the installation of the

air conditioning roof unit (height: 75 mm).

• Disconnect all power supply lines when working on the air conditioning roof

unit (cleaning, maintenance, etc).

2.2 Handling electrical cables

• Use cable ducts to lay cables through walls with sharp edges.

• Do not lay loose or bent cables next to electrically conductive materials

(metal).

• Do not pull on the cables.

• Attach and lay the cables in such a manner that they cannot be tripped over

or damaged.

• The electrical power supply may only be connected by a specialist work-

shop.

• Fit a fuse of 25 A to the connection to the vehicle's power supply.

• Never lay power supply lines (battery leads) in the vicinity of signal or control

cables.

SP950T-Renault--I-16s.book Seite 11 Donnerstag, 6. Juli 2017 4:43 16

EN

Conventions in this manual CoolAir SP950T

12

3 Conventions in this manual

3.1 General information on the installation manual

This installation manual contains the essential information and instructions for

installing the air conditioning roof unit. The information contained is orientated

towards the company installing the air conditioning roof unit.

The following instructions are intended to help you properly use the installation

manual:

• The installation manual is part of the scope of delivery and should be stored

carefully.

• The installation manual provides you with important information on the

installation of the device and can also be used as a reference material in the

event of repairs.

• The manufacturer assumes no liability for non-observance of this installation

manual. Any claims are excluded in this case.

3.2 Target group

The installation and configuration information in this manual is intended for

qualified installation personnel who are familiar with the guidelines and safety

precautions to be applied during the installation of lorry accessory parts.

SP950T-Renault--I-16s.book Seite 12 Donnerstag, 6. Juli 2017 4:43 16

13

EN

CoolAir SP950T Intended use

4 Intended use

The installation kit (Magnum: ref. no. 9100300034, Premium:

ref. no. 9100300035) enables the installation of a CoolAir SP950T roof

evaporator unit (ref. no. 9105305549) in a roof opening (ventilation hatch)

provided at the plant in a Renault Magnum/Premium driver cab.

The CoolAir SP950T roof evaporator unit can only be operated in combination

with a CoolAir SP950C condenser unit. Both components together form the

CoolAir SP950 parking cooler.

A

I

5 Scope of delivery

CoolAir SP950T installation kit for Renault Magnum, ref. no. 9100300034

NOTICE!

• The SP950 unit is not suitable for installation in construction machines,

agricultural machines or similar equipment. It will not work properly if

exposed to strong vibrations.

• Operating the SP950 unit with voltages other than those specified can

result in damage to the device.

NOTE

The SP950 unit is only designed for ambient temperatures of up to 43 °C.

Part designation Quantity Ref. no.

Installation manual 1 4445102168

2.5 m insulating tape (profile: 10 x 20 mm) 1 4443300055

Spacer sleeve L = 18 mm, ∅ 14 mm 8 4443900236

Hex screw M8 x 45 8 4445200107

Washer M8 8 4445200117

Washer M6 x 20 x 2 mm 4 4445200116

Spring washer M8 8 4445200091

Washer 8.4 x 20 8 4445200113

Connection cable 6 mm² x 4 m 1 4441300149

Cable binder 1 4445900256

Cover frame 1 4443000294

Washer M6 4 4445200115

Allen screw with cylindrical head M6 x 110 4 4445200093

Spacer sleeve L = 48 mm, ∅ 10 mm 8 4443900241

SP950T-Renault--I-16s.book Seite 13 Donnerstag, 6. Juli 2017 4:43 16

EN

Accessories CoolAir SP950T

14

CoolAir SP950T installation kit for Renault Premium, ref. no. 9100300035

6 Accessories

Available as accessories (not included in the scope of delivery):

Part designation Quantity Ref. no.

Installation manual 1 4445102168

2.5 m insulating tape (profile: 10 x 20 mm) 1 4443300055

Spacer sleeve L = 18 mm, ∅ 14 mm 8 4443900236

Hex screw M8 x 45 8 4445200107

Washer M8 8 4445200117

Washer M6 x 20 x 2 mm 4 4445200116

Spring washer M8 8 4445200091

Washer 8.4 x 20 8 4445200113

Connection cable 6 mm² x 4 m 1 4441300149

Cable binder 1 4445900256

Cover frame 1 4443000295

Washer M6 4 4445200115

Allen screw with cylindrical head M6 x 100 4 4445200092

Spacer sleeve L = 48 mm, ∅ 10 mm 4 4443900241

Spacer sleeve L = 40 mm, ∅ 10 mm 4 4443900240

Part designation Ref. no.

Connection cable 8 mm² x 11 m 9100300027

SP950T-Renault--I-16s.book Seite 14 Donnerstag, 6. Juli 2017 4:43 16

15

EN

CoolAir SP950T Installation

7 Installation

A

7.1 Notes on installation

These installation instructions must be read completely prior to the installation of

the air conditioning roof unit.

The following tips and instructions must be observed wile installing the air

conditioning roof unit:

!

• Always check whether any vehicle components could be damaged or their

operation impaired by the unit before installing the air conditioning roof unit.

You can use fig. 1, page 3 and fig. 2, page 3 to check the dimensions of

the installed unit. The dotted line indicates the middle of the sunroof open-

ing.

• Before installation, find out (by consulting the manufacturer of the vehicle)

whether the construction is designed for the static weight and the loads of

the parking cooler when the vehicle is in motion. The manufacturer of the air

conditioning roof unit assumes no liability whatsoever.

• The roof inclination of the mounting surface may not exceed 8° in the

direction of travel.

• The supplied assembly parts must not be modified during installation.

• The ventilation slots (grill) may not be covered (minimum distance from other

attachment parts: 10 cm).

• You can connect the unit to the battery via the lorry's terminal block or

directly. The terminal block is to be preferred for the connection. On some

vehicles, larger consumers connected to the terminal block are switched off

after a short while if the power requirement is too high. Ask your vehicle man-

ufacturer for the specifications of the terminal block.

NOTICE!

• The air conditioning roof unit may only be installed by qualified personnel

from a specialist company. The following information is intended for

technicians who are familiar with the guidelines and safety precautions to

be applied.

• The manufacturer only assumes liability for parts included in the scope of

delivery. The validity of the warranty expires if the device is installed

together with third-party parts.

• Check whether the roof of the vehicle is able to support the weight of a

person before climbing onto it. Ask the vehicle manufacturer about the

permitted roof loads.

WARNING!

Make sure that all electrical components are electrically discharged before

carrying out work on them!

SP950T-Renault--I-16s.book Seite 15 Donnerstag, 6. Juli 2017 4:43 16

EN

Installation CoolAir SP950T

16

• When installing the system and making the electrical connections, observe

the guidelines from the body manufacturer.

• Pay attention to the connection plan for the device:

!

I

No. in

fig. 9, page 7

Designation

1Condensate pump

2Evaporator fan

3 Operating circuit board

4 Temperature sensor

5 Level sensor

6Control unit

725 A fuse

8 4 A fuse vaporiser fan

9 4 A fuse condenser fan

10 Condenser fan

11 Compressor

12 Klickson (compressor)

WARNING!

Before installing the air conditioning roof unit, all connections to the battery of

the vehicle must be disconnected.

Non-observance of this regulation can result in danger of electrocution.

CAUTION!

Improper installation of the air conditioning roof unit can result in irreparable

damage to the device and put the safety of the user at risk.

The manufacturer will not be held liable for claims if the air conditioning roof

unit is not installed according to this installation manual. That applies to mal-

functions and the safety of the air conditioning roof unit, in particular to injuries

and damage to property.

NOTE

After installing the unit, the specified parameters of the unit software must be

checked (chapter “Configuration of unit software” on page 20).

SP950T-Renault--I-16s.book Seite 16 Donnerstag, 6. Juli 2017 4:43 16

17

EN

CoolAir SP950T Installation

7.2 Removing the sunroof

➤ Remove all screws and fixtures of the existing sunroof.

➤ Take out the sunroof.

➤ Remove the sealant around the opening, so that the surface is clean and free

of grease.

I

7. 3 Attaching the seal for the cab roof

A

➤ Stick the 2.5 m insulating tape (10 x 20 mm) to the cab roof, following the

outline of the sunroof opening (fig. 3, page 3).

➤ Provide the abutting edge and the top edge of the insulating tape with an

unhardened plastic butyl sealing compound (e.g. SikaLastomer-710).

7.4 Installing the unit in the sunroof

➤ Set the unit down centrally aligned and in the direction of travel (fig. 1,

page 3) on the sunroof opening.

I

➤ Place the spacer sleeve L = 18 mm (fig. 4 1, page 4) and the washer M8

(fig. 4 9, page 4) on the fastening drill holes as shown in fig. 4, page 4.

➤ Screw one hex screw M8 x 40 (fig. 4 4, page 4) with a washer (fig. 4 2,

page 4) and spring washer (fig. 4 3, page 4) in the 8 thread inserts on the

bottom of the unit.

A

➤ Tighten the screws with a torque of 8 Nm.

NOTE

Dispose of all waste material, glue, silicone and seals separately. Observe the

local disposal guidelines.

NOTICE!

Ensure that the adhesive surface for the seal between the unit and the cab roof

is clean (free of dust, oil, etc.).

NOTE

Make sure the air conditioning roof unit is centred perfectly. The seal must be

applied continuously around the air conditioning roof unit after being placed

on the roof of the vehicle. This is the only way to ensure a tight seal.

NOTICE!

Do not exceed the specified torque under any circumstances. This is the only

way to ensure that the thread inserts are not torn out.

SP950T-Renault--I-16s.book Seite 17 Donnerstag, 6. Juli 2017 4:43 16

EN

Installation CoolAir SP950T

18

7.5 Installing the electrical supply lines

!

A

I

You can connect the unit to the battery via the lorry's terminal block or directly.

The terminal block is to be preferred for the connection. Ask your vehicle

manufacturer for the specifications of the terminal block.

➤ Lay the supply line and connect it to the vehicle (red line to plus, black line to

minus).

➤ Plug in the supply line plug into the socket of the air conditioning roof unit

supply line.

➤ To relieve strain on the supply line, secure it with a cable tie, e.g. to the cab

roof.

WARNING!

• The electrical power supply may only be performed by qualified personnel

with specialist knowledge.

• Make sure there is no voltage present on electrically operated components

before carrying out work on them!

NOTICE!

• Fit a fuse of 25 A to the connection to the vehicle's power supply.

• The battery must be able to supply the required current and voltage

(chapter “Technical data” on page 25).

NOTE

The unit is equipped as standard with a 4 m long cable with a cross-section of

6mm

2

. If longer cable lengths are required, then the cable cross-section must

be increased by an authorised specialist workshop:

In this case cut off the cable as closely as possible to the unit (max. 0.5 m) and

then establish a suitable connection with a larger cable cross-section.

When the cable is extended by 4 m to 6 m in length, the manufacturer

recommends using a cross-section of at least 8 mm

2

.

SP950T-Renault--I-16s.book Seite 18 Donnerstag, 6. Juli 2017 4:43 16

19

EN

CoolAir SP950T Installation

7.6 Installing supply lines to the condenser unit

Observe the following instructions when installing the supply lines:

• Also observe the installation instructions for the condenser unit.

• The maximum cable length between the evaporator and condenser unit is

4.20 m (fig. 5, page 4).

• When installing and bending supply lines, avoid narrow radii. Use a suitable

round object as a bending aid. A radius which is too narrow will buckle the

refrigerant line, and the parking cooler will be inoperable.

➤ Shorten any supply line which is not needed by bending a curve.

➤ Apply packing compound (fig. 6 1, page 5) to prevent water entering

between the rear wall of the truck and the clip.

I

➤ Fasten the supply lines to the rear wall of the truck using the clips provided

(fig. 6, page 5).

➤ Insert the corrugated piping in the holder provided (fig. 6 2, page 5).

➤ Put the cover on (fig. 6 4, page 5).

7.7 Fastening the cover frame

A

See fig. 7, page 6

➤ Fasten the cover frame (6) to the unit with the four cylindrical screws

(Magnum: M6 x 110 mm; Premium: M6 x 100 mm) (8), washers (7), washers

M6x20x2mm (10) and the eight spacer sleeves (Magnum: two L = 48 mm;

Premium: one L = 48 mm and one L = 40 mm) (5). The spacer sleeves keep

the cover frame apart from the unit.

NOTE

If you wish to avoid damaging the rear wall of the truck (drilling a hole), you can

also apply the clip using a suitable adhesive. Observe the instructions provided

by the adhesive manufacturer.

NOTICE!

Screw the screws in carefully order not to damage the cover frame.

SP950T-Renault--I-16s.book Seite 19 Donnerstag, 6. Juli 2017 4:43 16

EN

Configuration of unit software CoolAir SP950T

20

8 Configuration of unit software

Before you first start up the unit, the controls can be adapted to suit the

installation conditions. This must be done by the person installing the unit.

In configuration mode, the following unit software parameters must be set at the

control panel (fig. 8, page 6).

I

8.1 Starting and ending configuration mode

The adjustable parameters can be changed in configuration mode:

➤ When using the button to switch on the unit, hold both buttons +

and

–

pressed until the compressor LED flashes.

✓ You are now in configuration mode.

✓ The display version (e. g. “3.1S”) appears in the display for 2 seconds.

✓ The first digit of the display shows the menu level and the second and third

digits show the parameters which can be set, e.g.

1.17 for menu level 1 and a

set target value of 17 °C.

I

➤ Press the button to quit configuration mode.

Menu

level

Parameter Meaning

Default

setting

1 Set temperature The unit starts at the temperature

defined here.

20 °C (68 °F)

2Low voltage

cut-off

The battery monitor shuts down the unit

at the voltage defined here.

Characteristic

figure 4 =

22,8 V

3 Operating mode The unit starts with the operating mode

defined here.

0 = Auto-

matic mode

4 Default settings Parameters 1 – 3 can be reset to the

default settings.

--

5Temperature unit

display

The temperature can be displayed in °C

or °F.

°C

NOTE

Configuration mode can still be activated if the undervoltage protection

mechanism has switched off the unit and only residual voltage is available.

NOTE

If you make no entry on the control panel for 60 seconds, the unit quits

configuration mode and shuts down.

SP950T-Renault--I-16s.book Seite 20 Donnerstag, 6. Juli 2017 4:43 16

21

EN

CoolAir SP950T Configuration of unit software

8.2 Menu level 1: Set temperature

The unit always starts with a defined value for the room temperature. This

parameter can be configured between 17 and 30 °C (62 and 86 °F).

➤ Start configuration mode (chapter “Starting and ending configuration mode”

on page 20).

✓ The first digit of the display shows the menu level and the second and third

show the parameter which can be set.

➤ Press the button to change the parameters.

➤ Use the +

and

–

buttons

to select the target value (in °C) at which the unit

should start operation.

✓ The digits in the display flash until the parameter you entered is confirmed.

➤ Press the button to confirm your entry.

✓ The set value is saved and is then used when the unit is restarted.

✓ You are now in menu level 1 again and can use the +

and

– buttons to switch

between menu levels.

SP950T-Renault--I-16s.book Seite 21 Donnerstag, 6. Juli 2017 4:43 16

EN

Configuration of unit software CoolAir SP950T

22

8.3 Menu level 2: Low voltage cut-off

The battery monitor protects the battery from excessive discharging.

A

If only the set power supply is available here for the air conditioning roof unit, the

unit is switched off.

➤ Start configuration mode (chapter “Starting and ending configuration mode”

on page 20).

✓ The first digit of the display shows the menu level and the second and third

show the parameter which can be set.

➤ Press the

+

button

once to switch to menu level

2

.

➤ Press the button to change the parameter.

✓ The digits in the display flash until the parameter you entered is confirmed.

➤ Use the +

and

–

buttons

to set the value for low voltage shutdown. The

characteristic figures at second and third place on the display represent the

voltage (V) at which the unit is shut down:

➤ Press the button to confirm your entry.

✓ The set value is saved and is then used when the unit is restarted.

✓ You are now in menu level 2 again and can use the +

and

– buttons to switch

between menu levels.

NOTICE!

When the battery monitor switches the device off, the battery only has part

of its charging capacity. Avoid starting repeatedly or operating electrical

consumers. Make sure that the battery is recharged. As soon as the required

voltage is available again, the unit can be operated again.

Characteristic

figure

Low voltage

shutdown

Characteristic

figure

Low voltage

shutdown

1 22.2 6 23.0

2 22.4 7 23.1

3 22.6 8 23.2

4 22.8 9 23.4

5 22.9 10 23.6

SP950T-Renault--I-16s.book Seite 22 Donnerstag, 6. Juli 2017 4:43 16

23

EN

CoolAir SP950T Configuration of unit software

8.4 Menu level 3: Operating mode

The unit always starts with a defined operating mode for room temperature. This

parameter can be configured:

➤ Start configuration mode (chapter “Starting and ending configuration mode”

on page 20).

✓ The first digit of the display shows the menu level and the second and third

show the parameter which can be set.

➤ Press the

+

button

twice to switch to menu level

3

.

➤ Press the button to change the parameters.

✓ The digits in the display flash until the parameter you entered is confirmed.

➤ Use the +

and

–

buttons

to set the mode with which the unit starts up:

➤ Press the button to confirm your entry.

✓ The set value is saved and is then used when the unit is restarted.

✓ You are now in menu level 3 again and can use the +

and

– buttons to switch

between menu levels.

Characteristic

figure

Operating mode

0 Automatic mode

1 Operating mode 1

2 Operating mode 2

3 Operating mode 3

SP950T-Renault--I-16s.book Seite 23 Donnerstag, 6. Juli 2017 4:43 16

Page is loading ...

Dometic CoolAir SP950T Installation guide

This manual is also suitable for

Dometic CoolAir SP950T Installation guide

in other languages

Related papers

Other documents