Page is loading ...
1/2-Rack Space 2-Channel Digital Graphic EQ
Quick Start Owner’s Manual
Manual de inicio rápido para el usuario
(ESPAÑOL)
Schnellbedienungsanleitung
(DEUTSCH)
Manuel d’utilisation du propriétaire
(FRANÇAIS)
Manuale rapido di utilizzazione
(ITALIANO)
CONTENUTO DELLA CONFEZION
E
• EQUALIZER
•
CAVI DI ALIMENTAZIONE
CONTENU DE LA BOÎT
E
• EQUALIZER
•
BLOC D’ALIMENTATION
SCHACHTELIN
H
ALT
• EQUALIZER
•
STROMKABEL
BOX CONTENT
S
• EQUALIZER
•
POWER SUPPLY
CONTENIDOS DE LA CAJ
A
• EQUALIZER
•
FUENTE DE ALIMENTACIÓN
QUICK START OWNERS MANUAL
(ENGLISH)
1. Make sure all items listed on the front of this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
3. Study this setup diagram.
4. Place the equalizer in an appropriate position for operation.
5. Make sure all devices are turned off and all volumes are at “zero”.
6. Connect all input sources as indicated in the diagram.
7. Connect the outputs to the power amplifier(s), tape decks, and/or audio sources.
8. Plug your equalizer and other devices into AC power.
9. Switch everything on in the following order:
• Audio input sources
• Your equalizer
• Your mixer
• Last, any amplifiers
10. When turning off, always reverse this operation by:
• Turning off amplifiers
• Your mixer
• Your equalizer
• Last, any input devices
11. Go to http://www.alesis.com/
for product registration.
FRONT PANEL FEATURES
1. Band Gain LEDs: Indicate for each
frequency band how much cut or boost
has been applied.
2. Signal/Clip LEDs: Show audio input
levels.
3. 7-Segment Display: Shows currently
selected Program, and shows cut or
boost amount when editing a band.
4. Band Select Buttons: Press these to
select a particular band for editing.
5. Bypass LED: Indicates that the EQ is
bypassed.
6. Power Button: Turns the unit on and
off.
7. Up/Down Buttons: Change Program, or
increment or decrement Band Gain
values.
8. A/B/Link LEDs: Indicate if the current
curve display is for channel A, channel
B, or is stereo linked.
REAR PANEL FEATURES
Note: It is recommended that the DEQ224
be turned off before connecting and
disconnecting any sources to the inputs of
the unit.
1. Channel A Input: Balanced 1/4" Line Level
input to Channel A. -10dBV nominal input,
+5dBV maximum input.
2. Channel B Input: Balanced 1/4" Line Level
input to Channel B. -10dBV nominal input,
+5dBV maximum input.
3. Channel A Output: Balanced 1/4" Line
Level output from Channel A. -10dBV
nominal output, +5dBV maximum output.
4. Channel B Output: Balanced 1/4" Line
Level output from Channel B. -10dBV
nominal output, +5dBV maximum output.
5. 9VAC Power Input: 9VAC barrel jack
input. Connect only Alesis 9VAC "P3" power
supply to this jack. Connecting any other
power supply to this jack may cause
irreparable harm to the unit.
/
