BLU-RAY DISC / DVD VIDEO TRANSPORT
DVD-2500BTCI
OPERATING INSTRUCTIONS
MODE D’EMPLOI
INSTRUCCIONES DE FUNCIONAMIENTO
E5H01UD_V4_EN.book Page 1 Wednesday, October 15, 2008 10:37 AM
I
Introduction
ENGLISH FRANÇAIS ESPAÑOL
Introduction
1. Read Instructions - All the safety and operating instructions should be read
before the product is operated.
2. Retain Instructions - The safety and operating instructions should be retained for
future reference.
3. Heed Warnings - All warnings on the product and in the operating instructions
should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
6. Attachments - Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water - for example, near a
bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a
swimming pool; and the like.
8. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket,
or table. The product may fall, causing serious injury to a child or adult, and
serious damage to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting of
the product should follow the manufacturer’s
instructions, and should use a mounting accessory
recommended by the manufacturer.
9. A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces
may cause the product and cart combination to overturn.
10. Ventilation - Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating, and
these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa, rug, or
other similar surface. This product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
11. Power Sources - This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the
operating instructions.
12. Grounding or Polarization - This product may be equipped with a polarized
alternating-current line plug (a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug.
13. Power-Cord Protection - Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
14. Outdoor Antenna Grounding – If an outside antenna or cable system is
connected to the product, be sure the antenna or cable system is grounded so as
to provide some protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information
with regard to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode. See Figure A.
15. Lightning - For added protection for this product during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug it from the
wall outlet. This will prevent damage to the product due to lightning and power-
line surges.
16. Power lines - An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits
as contact with them might be fatal.
17. Overloading - Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
18. Object and Liquid Entry - Never push objects of any kind into this product
through openings as they may touch dangerous voltage points or short-out parts
that could result in a fire or electric shock. Never spill liquid of any kind on the
product.
19. Servicing - Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
20. Damage Requiring Service - Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the following conditions:
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to its normal operation.
e) If the product has been dropped or damaged in any way.
f) When the product exhibits a distinct change in performance - this indicates
a need for service.
21. Replacement Parts - When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
22. Safety Check - Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the product is in
proper operating condition.
23. Wall or Ceiling Mounting – The product should be mounted to a wall or ceiling
only as recommended by the manufacturer.
24. Heat - The product should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that produce heat.
Safety Precautions
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Laser Safety
CAUTION:
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK MECHANISM.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
THIS PRODUCT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
FIGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL
ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUND CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
SAFETY INSTRUCTIONS
E5H01UD_V4_EN.book Page I Wednesday, October 15, 2008 10:37 AM
II
Introduction Introduction
ESPAÑOL FRANÇAIS ENGLISH
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
FCC INFORMATION (For US customers)
1. PRODUCT
This product complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this product may not cause harmful
interference, and (2) this product must accept any interference received,
including interference that may cause undesired operation.
2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in
this manual, meets FCC requirements. Modification not expressly
approved by DENON may void your authority, granted by the FCC, to use
the product.
3. NOTE
This product has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation.
This product generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this product does cause harmful interference to radio or television
reception, which can be determined by turning the product OFF and ON,
the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the product into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the local retailer authorized to distribute this type of
product or an experienced radio/TV technician for help.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME
LA PLUS LARGE DE LAFICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
䡵 Note on use / Observations relatives a l’utilisation / Notas sobre el uso
•
Allow for sucient heat dispersion when installed
in a rack.
• Eviter des températures élevées
Avoid high temperatures.
Tenir compte d’une dispersion de chaleur susante
lors de l’installation sur une étagère.
• Evite altas temperaturas
Permite la suciente dispersión del calor cuando
está instalado en la consola.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
• Manipuler le cordon d’alimentation avec précaution.
• Keep the apparatus free from moisture, water, and
dust.
lapoussière.
•
Mantenga el equipo libre de humedad, agua y
polvo.
• Unplug the power cord when not using the
apparatus for long periods of time.
• Débrancher le cordon d’alimentation lorsque
l’appareil n’est pas utilisé pendant de longues
périodes.
•
Desconecte el cordón de energía cuando no utilice
el equipo por mucho tiempo.
* (For apparatuses with ventilation holes)
• Do not obstruct the ventilation holes.
• Ne pas obstruer les trous d’aération.
• No obstruya los oricios de ventilación.
• Do not let foreign objects into the apparatus.
• Ne pas laisser des objets étrangers dans l’appareil.
• No deje objetos extraños dentro del equipo.
• Do not let insecticides, benzene, and thinner come
in contact with the apparatus.
• Ne pas mettre en contact des insecticides, du
benzène et un diluant avec l’appareil.
•
No permita el contacto de insecticidas, gasolina y
diluyentes con el equipo.
• Never disassemble or modify the apparatus in any
way.
• Ne jamais démonter ou modier l’appareil d’une
manière ou d’une autre.
• Nunca desarme o modique el equipo de ninguna
manera.
Tenir la prise lors du débranchement du cordon.
•
Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el cordón
de energía.
•
Protéger l’appareil contre l’humidité, l’eau et
E5H01UD_V4_EN.book Page II Wednesday, October 15, 2008 10:37 AM
1
Introduction Introduction
ENGLISH
ENGLISH
Introduction
Features .................................................................................... 1
Important ................................................................................. 2
Power Supply ........................................................................... 2
Warning .................................................................................... 2
Installation Location ................................................................ 2
Cautions on Installation .......................................................... 2
Caution on Handling ............................................................... 3
Dew Warning ............................................................................ 3
Avoid the Hazards of Electrical Shock and Fire ..................... 3
Before Using ............................................................................. 3
Supplied Accessories ............................................................... 3
Trademark Information ........................................................... 3
About Discs .............................................................................. 4
Disc Handling ...........................................................................................4
Cleaning Discs ..........................................................................................4
Playable Discs and Files ........................................................................4
Unplayable Discs .....................................................................................5
Color Systems ...........................................................................................5
Region Codes ...........................................................................................5
Structure of Disc/SD Memory Card Contents ...............................5
Symbols Used in this Operating Instructions ...............................5
About the Remote Control ...................................................... 6
Loading the Batteries ............................................................................6
Using a Remote Control .......................................................................6
Setting this Unit not React to Other DENON's DVD Player's
Remote Control ....................................................................................6
Changing the Signal Code of a Remote Control .........................6
Part Names and Functions ...................................................... 7
Front Panel ................................................................................................7
Rear Panel ..................................................................................................7
Remote Control .......................................................................................8
Front Panel Display ................................................................................9
Adjusting the Brightness of the Display .........................................9
Examples of Displays during Operation .........................................9
Connections
Connecting to a Display Device with HDMI Cable ................... 10
Connecting to a Display Device and an Amplifier/Receiver
with HDMI Cable ............................................................................... 10
HDMI Output Mode and Actual Output Signals ....................... 10
Audio Setting ........................................................................................ 11
Connecting the AC Cord ................................................................... 11
Playback
Direct Playback .......................................................................12
Operations Using Disc Menu, Title Menu, and
Popup Menu .........................................................................13
Playing Back a VR mode DVD-RW/-R ...................................13
Pause .......................................................................................13
Resume Playback ....................................................................14
Fast Forward / Fast Reverse Playback ..................................14
Slow Forward Playback ..........................................................14
Step by Step Playback ............................................................14
Dialog Speed ...........................................................................15
Repeat Playback .....................................................................15
A-B Repeat ..............................................................................................15
Program Playback ..................................................................16
Random Playback ...................................................................16
Zoom .......................................................................................17
Camera Angle .........................................................................17
Search ......................................................................................17
On-Screen Display ..................................................................18
Selecting the Format of Audio and Video ............................20
Selecting Audio Streams/Channels ............................................... 20
Selecting Subtitle Language ............................................................ 21
Adjusting the Picture ..........................................................................21
Virtual Surround ...................................................................................22
Pure Direct Mode .................................................................................22
Setting the BD Audio Mode .............................................................22
Playing Back an MP3, Windows Media™ Audio,
JPEG and DivX® File .............................................................23
Kodak Picture CD ..................................................................................25
Reading the SD Memory Card ...............................................25
Function Setup
Using the Setup Menu ........................................................................ 27
Quick .......................................................................................27
Custom ...................................................................................27
Initialize ..................................................................................33
Others
Troubleshooting .....................................................................34
Language Code .......................................................................35
Specifications .........................................................................36
●HDMI (High-Definition Multimedia Interface)
You can enjoy clearer video output when connecting this unit to
a display device with an HDMI-compatible port.
●Dialog Speed
Playback in slightly faster speed while keeping the sound quality
as in the normal playback.
Dialog speed is available only on discs recorded in the Dolby
Digital format.
●Still/Fast/Slow/Step Playback
Various playback modes are available including still pictures, fast
forward/reverse, slow motion and step frames.
●Still Mode
The resolution of pictures while in the still (pause) mode can be
adjusted.
●Random Playback for audio CD, MP3, JPEG, and Windows
Media™ Audio
This unit can shuffle the playback order of tracks/files.
●Program Playback for audio CD, MP3, JPEG, and Windows
Media™ Audio
You can program the playback order of tracks/files in a desired
order.
●BD/DVD Menus in a Desired Language
You can display BD/DVD menus in a desired language, if
available on a BD/DVD.
●Auto Power Off
The power turns off automatically if there is no activity at the
unit or its remote control for more than 30 minutes (refer to page
33).
●Subtitles in a Desired Language
You can select a desired language for subtitles if that language is
available on the BD/DVD and DivX
®
.
●Selecting a Camera Angle
You can select a desired camera angle if a disc contains
sequences recorded from different angles.
●Choices for Audio Language and Sound Mode
You can select a desired audio language and sound mode if
different languages and modes are available on a disc.
●Ratings Control (Parental Lock)
You can set the control level to limit playback of discs which may
not be suitable for children.
●Automatic Detection of Discs
This unit automatically detects if a loaded disc is BD, DVD, audio
CD, MP3, JPEG, Windows Media™ Audio or DivX
®
.
Contents Features
E5H01UD_V4_EN.book Page 1 Wednesday, October 15, 2008 10:37 AM
2
Introduction Introduction
ENGLISH
ENGLISH
●On-Screen Display
Information about the current operation can be displayed on a
screen, allowing you to confirm the currently active functions
(such as program playback) using the remote control.
●Dimmer
The brightness of the front panel display can be adjusted.
●Screen Saver
The screen saver program starts if there is no activity at the unit or its
remote for more than 5 minutes. The brightness of the display is
darken by 75%. The program is deactivated when there is any activity.
●Picture Control
Picture control adjusts the picture quality of the specific display.
●Search
Chapter search: Search for a desired chapter.
Title search: Search for a desired title.
Track search: Search for a desired track/file.
Time search: Search for a desired time point or a title or a track/
file.
●Repeat
Chapter: Repeated playback of a chapter of the disc.
Title: Repeated playback of a title of the disc.
Track: Repeated playback of a track/file of the disc.
All: Repeated playback of the entire disc.
(not available for BD, DVD-video)
A-B: Repeated playback of a part between two points.
Group: Repeated playback of a folder of the MP3/JPEG/
Windows Media™ Audio/DivX
®
disc being played
back is possible.
●Zoom
x1.2, x1.5, x2.0, x4.0 magnified image can be displayed. (not
available for BD)
●Marker
Electric reference points designated by user can be called back.
●Resume Playback
User can resume playback from the point at which the playback
has been stopped even if the power is turned off.
●Bit Rate Indication
The bit rate (the amount of video data currently being read) can
be displayed during the playback of video contents. (not
available for BD)
●DRC (Dynamic Range Control)
Use this procedure to set the dynamic range of the output
signals when playing back DVD/BD recorded in Dolby Digital/
Dolby Digital Plus/Dolby TrueHD.
●Displaying a JPEG picture
Kodak Picture CD can be played back. Still images stored in JPEG
format on DVD-RW/-R, CD-RW/-R or SD Memory Card can also be
played back.
●Playing Back Windows Media™ Audio File
You can enjoy Windows Media™ Audio files which are recorded
on DVD-RW/-R, CD-RW/-R or SD Memory Card.
●Playing Back an MP3 File
You can enjoy MP3 files which are recorded on DVD-RW/-R,
CD-RW/-R or SD Memory Card.
●Playing Back DivX
®
File
You can enjoy DivX
®
files which are recorded on DVD-RW/-R or
CD-RW/-R.
• Official DivX
®
Certified product
• Plays all versions of DivX
®
video (including DivX
®
6) with
standard playback of DivX
®
media files.
●Playing Back the Contents in SD Memory Card
• You can playback MP3, Windows Media™ Audio, or JPEG stored
in an SD Memory Card.
• You can store picture-in-picture commentary, subtitles or other
extras for BD-ROM Profile 1.1 files in a SD Memory Card and
playback with the BD-ROM.
●BD-J Application
• With some BD that supports Java applications (BD-J), you can
enjoy interactive function (e.g., game).
Use only discs marked with logos listed on page 4.
The main power supply is engaged when the main plug is
plugged in a 120V, 60Hz AC outlet. To operate the unit, press
<ON/STANDBY> to turn on the unit.
To avoid fire or electric shock, do not expose this unit to rain or
moisture.
For safety and optimum performance of this unit:
• Do not stand the unit up vertically. Install the unit in a horizontal
and stable position. Do not place anything directly on top of the
unit. Do not place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from sources of
intense heat. Avoid dusty or humid places. Avoid places with
insufficient ventilation for proper heat dissipation. Do not block
the ventilation holes on the sides of the unit. Avoid locations
subject to strong vibration or strong magnetic fields.
• Be sure to remove a disc and unplug the AC cord from the outlet
before carrying the unit.
Noise or disturbance of the picture may be generated if this unit or
any other electronic equipment using microprocessors is used
near a tuner or TV.
If this happens, take the following steps:
• Install this unit as far as possible from the tuner or TV.
• Set the antenna wires from the tuner or TV away from this unit’s
AC cord and input/output connection cords.
• Noise or disturbance tends to occur particularly when using
indoor antennas or 300Ω/ohms feeder wires. We recommend
using outdoor antennas and 75Ω/ohms coaxial cables.
Important
Power Supply
Warning
WARNING:
LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.
Installation Location
Non-use periods - Turn off the unit when it is not in use. Unplug
the unit from the household AC outlet if it is not to be used for a
long time. Unplug the unit during lightning storms.
Please read this operating instructions carefully before using the
unit, and keep it for future reference.
Cautions on Installation
Note
• For heat dispersal, do not install this equipment in a
confined space such as a book case or similar unit.
E5H01UD_V4_EN.book Page 2 Wednesday, October 15, 2008 10:37 AM
3
Introduction Introduction
ENGLISH
ENGLISH
●Cautions on using mobile phones.
Using a mobile phone near this unit may result in noise. If so,
move the mobile phone away from this unit when it is in use.
●Before turning the power operation button on.
Check once again that all connections are correct and that there
are not problems with the connection cables. Always set the
power operation button to the standby position before
connecting and disconnecting connection cables.
●Sufficiently ventilate the place of installation.
If the unit is left in a room full of the smoke from cigarettes, etc., for
long periods of time, the surface of the optical pickup could get
dirty, in which case it will not be able to read the signals properly.
Moisture condensation may occur inside the unit when it is
moved from a cold place to a warm place, or after heating a cold
room or under conditions of high humidity. Do not use the unit at
least for 2 hours until its inside is dry.
• Do not handle the AC cord with wet hands.
• Do not pull on the AC cord when disconnecting it from AC wall
outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug the AC cord
immediately and take the unit to our authorized service center
for servicing.
Pay attention to the following before using this unit:
●Moving the unit.
To prevent short-circuits or damaged wires in the connection
cables, always unplug the power supply cord and disconnect the
connection cables between all other audio components when
moving the unit.
●Store the operating instructions in a safe place.
After reading the operating instructions, store them in a safe
place as they could come in handy in the future.
●Whenever <ON/STANDBY> is in the STANDBY state, the unit
is still connected to AC line voltage.
Please be sure to unplug the cord when you leave home for, say,
a vacation.
●Note that the illustrations in these instructions may differ
from the actual unit for explanation purposes.
The serial number of this product may be found on the back of
the unit. No others have the same serial number as yours. You
should record the number and other vital information here and
retain this book as a permanent record of your purchase to aid
identification in case of theft.
Caution on Handling
Dew Warning
Avoid the Hazards of Electrical Shock and Fire
DVD-2500BTCI
BLU-RAY DISC PLAYER
HDMI
RESOLUTION
SD CARD
ON / STANDBY
10 cm or more
Wall
Before Using
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
Supplied Accessories
Please check to make sure the following items are included with
the main unit in the carton.
remote control (RC-1090) “AA” (R6P) batteries x2
AC cord operating instructions
service station list warranty card
Trademark Information
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and
worldwide patents issued & pending. “DTS” and “DTS Digital
Surround” are registered trademarks and the DTS logos and
Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All
Rights Reserved.
E5H01UD_V4_EN.book Page 3 Wednesday, October 15, 2008 10:37 AM
4
Introduction Introduction
ENGLISH
ENGLISH
DivX, DivX Certified, and associated logos are trademarks of DivX,
Inc. and are used under license.
• Handle the discs so that fingerprints and dust do not adhere to
the surfaces of the discs.
• Always store the disc in its protective case when it is not used.
• Note that discs with special shapes cannot be played on this
product. Do not attempt to play back such discs, as they may
damage the unit.
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe
the disc from the center to out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analog records.
This unit is compatible to play back the following discs.
To play back a BD or DVD, make sure that it meets the requirements
for region codes and color systems as described on page 5.
You can play back discs that have the following logos on the disc.
Other disc types are not guaranteed to play back.
Java and all other trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the United
States and/or other countries.
Windows Media and the Windows logo are trademarks or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
“Blu-ray Disc” and are trademarks.
is a trademark of DVD Format/Logo Licensing Corporation.
is trademark of Eastman Kodak Company.
About Discs
Disc Handling
Cleaning Discs
Playable Discs and Files
Playable discs Logos
Blu-ray Disc
-BD-video
- BD-RE(ver.3.0)
(Recorded in BDMV format)
- BD-R(ver.2.0)
(Recorded in BDMV format)
(Unclosed discs may not be played
back.)
DVD-video
DVD-RW (Finalized discs only)
DVD-R
DVD-R DL
(Finalized discs only)
CD-DA (audio CD)
CD-RW
CD-R
Kodak Picture CD
DTS - CD (5.1 Music Disc)
Playable files Logos Media
MP3
DVD-RW/-R
CD-RW/-R
SD Memory Card
(including SDHC)
miniSD Card
microSD Card
Windows Media™
Audio
JPEG
DivX
®
DVD-RW/-R
CD-RW/-R
—
—
—
Note
• Discs containing the DivX
®
files with the DivX
®
GMC (Global
Motion Compensation) playback feature, which is DivX
®
supplemental function, cannot be played back on this unit.
• This unit cannot play back the disc contents protected by
Windows Media™ Digital Rights Management (DRM).
• “WMA” (Windows Media™ Audio) is an audio codec
developed by Microsoft® in the United States of America.
Readable cards Playable files / data
SD Memory Card (8MB - 2GB)
MP3, Windows Media™ Audio,
JPEG, Picture-in-picture
commentary, subtitles or other
extras for BD-ROM Profile 1.1
SDHC Memory Card (4GB)
miniSD Card (8MB - 2GB)
microSD Card (8MB - 2GB)
Note for SD Memory Cards
• Do not remove the SD Memory Card or turn off the unit while
the contents of the card is in playback. It may result in
malfunction or loss of the card’s data.
• Please keep the SD Memory Cards in their cases when you are
not using them.
• Do not try to open or modify the card.
• Do not touch the terminal surface with your fingers or any metals.
• Do not attach additional labels or stickers to cards.
• Do not remove the label of the SD Memory Cards.
• This unit supports SD Memory Card with FAT12/FAT16 file
system, and SDHC Memory Card with FAT32 file system.
• This unit may not read the SD Memory Cards formatted on
computer. If that is the case, please reformat the SD Memory
Cards on this unit and try again.
• This unit does not supports mini SDHC and micro SDHC
Memory Card.
• For miniSD Card and microSD Card adapter is necessary.
• Portions of this product are protected under copyright law
and are provided under license by ARIS/SOLANA/4C.
miniSD Card
Adapter
miniSD Card
microSD Card
Adapter
microSD Card
E5H01UD_V4_EN.book Page 4 Wednesday, October 15, 2008 10:37 AM
5
Introduction Introduction
ENGLISH
ENGLISH
The following discs will not play back on this unit. BD and DVD are recorded in different color systems throughout
the world. The most common color system is NTSC (which is used
primarily in the United States and Canada).
This unit uses NTSC, so BD or DVD you play back must be recorded
in the NTSC system. You cannot play back BD or DVD recorded in
other color systems.
This unit has been designed to play back BD with
region A and DVD-video with region 1. You cannot
play back BD or DVD-video that are labeled for other
regions. Look for the symbols on the right on your BD
or DVD-video. If these region symbols do not appear
on your BD or DVD-video, you cannot play back the
disc in this unit. The letter or number inside the
globe refers to region of the world. A BD or DVD-
video labeled for a specific region can only play back
on the unit with the same region code.
The contents of BD / DVD are generally divided into titles. Titles
may be further subdivided into chapters.
To specify for which media type each function is, we put the
following symbols at the beginning of each item to operate.
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
Unplayable Discs
• BD-RE Ver.1.0 (BD-disc with cartridge)
• BD-RE (Ver.2.0) (Recorded in BDAV format)
• BD-R (Ver.1.0) (Recorded in BDAV format)
• BD contains MP3/ Windows Media™ Audio/ JPEG/ DivX
®
files
• BD/DVD hybrid disc (e.g., Total Hi Def hybrid disc)
• BD-video that does not include "A" on its region code.
• DVD-video that does not include either "1" nor "ALL" on its
region code.
• DVD-ROM/RAM (For DVD-ROM discs, data files in DivX
®
3.11, 4.x,
5.x and 6 can be played)
• DVD-RW/-R recorded in non-compatible recording format
• CD-ROM (Data files in DivX
®
3.11, 4.x, 5.x and 6 can be played)
• CDV (Only the audio part can be played)
• CD-G (Only the audio signals can be output)
• CompactDisc-Interactive (CD-I)
• Video Single Disc (VSD)
• Video CD, Super Video CD
• Super audio CD (Only the sound on the CD layer can be heard. The
sound on the high-density super audio CD layer cannot be heard.)
•DVD-audio
• HD DVD
• Disc with recording area less than 55mm in diameter
• Unauthorized disc (Pirated disc)
• Unfinalized disc
Color Systems
Region Codes
Structure of Disc/SD Memory Card Contents
BD-video
DVD-video
MP3, WMA, JPEG, DivX®
group(folder)1 group(folder)2
audio CD
title 1 title 2
Audio CD
MP3, Windows Media™ Audio, JPEG, DivX
®
folder (group) 1 folder (group) 2
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
track 1 track 2 track 3 track 4 track 5
file (track) 1 file (track) 2 file (track) 3 file (track) 4 file (track) 5
Data discs or SD Memory Cards containing MP3/Windows Media™
Audio/JPEG/DivX
®
is divided into folders, and the folders are
subdivided into files.
Audio CDs are divided into tracks.
BD/DVD
Symbols Used in this Operating Instructions
Symbol Description
Description refers to BD-video and BD-RE (ver. 3.0)/
BD-R (ver. 2.0) recorded in BDMV format
Description refers to DVD-video and DVD-RW/-R
recorded in video mode
Description refers to DVD-RW/-R recorded in VR mode
Description refers to audio CD and DTS-CD
Description refers to DVD-RW/-R, CD-RW/-R and
SD Memory Card with MP3 files
Description refers to DVD-RW/-R, CD-RW/-R and
SD Memory Card with Windows Media™ Audio files
Description refers to DVD-RW/-R, CD-RW/-R and
SD Memory Card with JPEG files
Description refers to DVD-RW/-R and CD-RW/-R with
DivX
®
files
BD-V
DVD-V
DVD-VR
CD
MP3
WMA
JPEG
DivX
®
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Buttons on the main unit and remote control
E5H01UD_V4_EN.book Page 5 Wednesday, October 15, 2008 10:37 AM
6
Introduction Introduction
ENGLISH
ENGLISH
Keep in mind the following when using the remote control:
• Make sure that there are no obstacles between the remote
control and infrared sensor window on the unit.
• Remote operation may become unreliable if strong sunlight or
fluorescent light is shining on infrared sensor window of the
unit.
• Remote control for different devices can interfere with each
other. Avoid using remote control for other equipment located
close to the unit.
• Replace the batteries when you notice a fall off in the operating
range of the remote control.
• The maximum operable ranges from the unit are as follows.
If you have other DENON's DVD players around this unit, this unit
reacts to the commands you made for DVD players through its
remote control. To avoid this situation, you can set this unit not
react to other DENON's DVD player's remote control.
1) In stop mode, press [SETUP].
2) Press [7],[8],[9],[2].
3) Press [SETUP].
• “Only Attached Remocon” will be displayed on the upper
right corner of the screen and this unit only react to the
commands from this unit's remote control.
• To set back to default, press [7],[8],[9],[1] at step 2. “Normal
Remocon” will be displayed on the upper right corner of the
screen and this unit react to both the commands from this unit's
remote control and the other DENON's DVD players' remote
control.
To avoid the other DENON’s BD players responding the remote
signal of this unit, you can change the signal code of the remote
control. If the signal code of the remote control does not match to
the signal code of the unit, you cannot control the unit with the
remote control.
䡵 Change the signal code of the unit
1) In stop mode, press [SETUP].
2) Use [Y / Z] to select , then press [ENTER].
3) Use [Y / Z] to select , then press [ENTER].
4) Use [U / V] to select “Remote Control Setting”.
5) Press [ENTER] to select “DENON1” or “DENON2”.
6) Press [SETUP] to exit.
• At this point the new signal code of the unit is effective. Please
change the signal code of the remote control to match to the
signal code of the unit with following procedure.
䡵 Change the signal code of the remote control
Set to “DENON1”:
Press and hold [RETURN], and press [3], [2], [1].
Set to “DENON2”:
Press and hold [RETURN], and press [1], [2], [3].
• If the signal code does not match, the signal code of the remote
control will be displayed on the front panel display.
• The default setting and the setting after you change the
batteries is “DENON1”.
About the Remote Control
Loading the Batteries
A Open the battery
compartment cover.
B Insert two “AA” (R6P)
batteries, with each one
oriented correctly.
C Close the cover.
Cautions on Batteries
• Use “AA” (R6P) batteries in this remote control.
• Replace the batteries with new ones approximately once a
year, though this depends on the frequency with which the
remote control is used.
• If the remote control does not operate within a close
proximity of the main unit, replace the batteries with new
ones, even if less than a year has passed.
• The included batteries serve only for verifying operation.
Replace them with new batteries as soon as possible.
• When inserting the batteries, be careful to do so in the
proper direction, following the and marks in the remote
control’s battery compartment.
• To prevent damage or battery fluid leakage:
- Do not mix a new battery with an old one.
- Do not mix two different types of batteries such as alkaline
and manganese.
- Do not short-circuit, disassemble, heat or dispose of
batteries in flames.
• Remove the batteries when not planning to use the remote
control for a long period of time.
• If the batteries should leak, carefully wipe off the fluid from
the inside of the battery compartment, then insert new
batteries.
Using a Remote Control
- Line of sight: approx. 23 feet (7m)
- Either side of the center: approx. 23 feet (7m) within 30°
Setting this Unit not React to Other DENON's DVD Player's Remote Control
Note
• The setting remains after you turn off this unit or unplug the
AC cord.
• If you try to operate this unit with the other DENON's DVD
players' remote control, some of the operation may not be
available depending on the manufactured year or type of the
remote control.
30°30°
23 feet (7m) 30° 23 feet (7m) 23 feet (7m) 30°
Changing the Signal Code of a Remote Control
Remote Control Setting
DENON1
Media Select Disc
Others
E5H01UD_V4_EN.book Page 6 Wednesday, October 15, 2008 10:37 AM
7
Introduction Introduction
ENGLISH
ENGLISH
The unit can also be turned on by pressing the buttons with circled numbers.
Part Names and Functions
Front Panel
DVD-2500BTCI
BLU-RAY DISC PLAYER
HDMI
RESOLUTION
SD CARD
ON / STANDBY
3
5
6
9 10
11
13
2
1
12
4
7
8
1. ON/STANDBY button
Press to turn the unit on or off.
2. Power indicator
This indicator lights up in green when the
power is on, and lights up in red when in
standby mode.
3. Infrared sensor window
Receive signals from your remote control so
that you can control the unit from a distance.
4. Disc tray
Place a disc when opening the disc tray.
5. Display
Refer to “Front Panel Display” on page 9.
6. SD CARD slot
Insert an SD Memory Card, and play back the
contents in it.
7. A (OPEN/CLOSE) button
Press to open or close the disc tray.
8. B (PLAY) button
Press to start or resume playback.
9. C (STOP) button
Press to stop playback.
10. H / G (SKIP DOWN/UP) button
Press to skip down/up titles/chapters/tracks/
file.
11. h / g (FAST FORWARD/REVERSE)
button
During playback, press to fast forward / fast
reverse the playback. When playback is in
pause, press to slow forward the playback.
12. F (STILL/PAUSE) button
Press to pause playback.
13. HDMI RESOLUTION button
Press to set the HDMI jack’s video signal
output mode.
Rear Panel
Note
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause
permanent damage to the unit.
AC IN
RS-232C
STRAIGHT CABLE
ROOM TO ROOM
REMOTE CONTROL
HDMI OUT
OUT
IN
2
43
1
1. HDMI OUT jack
Use an HDMI cable to connect to a display
with an HDMI jack.
2. CONTROL CONNECTOR (RS-232C)
Control terminal for system extension.
3. ROOM TO ROOM OUT / IN jacks
Connecting the DENON Satellite Remote
Control to these jacks enables you to
operate more than one DENON components
with one remote control.
4. AC IN Terminal
Use the AC cord to connect to the AC outlet.
E5H01UD_V4_EN.book Page 7 Wednesday, October 15, 2008 10:37 AM
8
Introduction Introduction
ENGLISH
ENGLISH
The unit can also be turned on by pressing the buttons with
circled numbers.
1. POWER ON button
• Press to turn the unit on.
2. POWER OFF button
• Press to turn the unit off.
3. A-B REPEAT button
• Press to mark a segment between A and B for A-B repeat
playback.
4. REPEAT button
• Press to select the repeat mode.
5. RANDOM button
• Press to display the random playback screen for shuffling the
playback order of tracks/files.
6. ZOOM button
• During playback, press to enlarge the picture on the screen.
7. CLEAR button
• Press to clear the information once entered, to clear the
marker settings, or to cancel the programming for CD, etc.
8. RED/GRN/BLU/YEL button
• Press to select item on some BD menus.
9. TOP MENU button
• Press to display the top menu.
10. Cursor U / V / Y / Z buttons
• Press to select items or settings.
11. ENTER button
• Press to confirm or select menu items.
12. SETUP button
• Press to display the setup menu.
13. ANGLE button
• Press to access various camera angles on the disc.
• Press to rotate the JPEG/Kodak Picture images clockwise by
90 degrees.
14. SUBTITLE button
• Press to display the subtitle menu.
15. PURE DIRECT button
• Press to stop output of front panel display.
16. DISPLAY button
• Press to display the On-Screen display menu.
17. SKIP H button
• During playback, press to return to the beginning of the
current title chapter, track or file.
18. SKIP G button
• During playback, press to skip the next chapter, track or file.
19. STOP C button
• Press to stop playback.
20. REW h button
• During playback, press to fast reverse the playback.
21. STILL/PAUSE F button
• Press to pause playback.
• When playback is in pause, press repeatedly to forward the
playback step by step.
22. FFW g button
• During playback, press to fast forward the playback.
• When playback is in pause, press to slow forward the
playback.
23. PLAY B button
• Press to start playback or resume playback.
24. MODE button
• During playback, press to display the picture adjustment
menu, and rapid playback.
• During the JPEG playback, press to display menus for
changing the visual effect for switching the image or
changing the size of the image.
• In stop mode with BD inserted, press to display a menu for
setting the BD audio mode.
• In stop mode with BD or DVD inserted, press to display a
menu for setting the virtual surround.
• In stop mode with audio CD, or disc with MP3, Windows
Media™ Audio, JPEG files inserted, press to display menus for
program and random playback.
25. AUDIO button
• Press to display the audio menu.
26. RETURN button
• Press to return to the previously displayed menu screen.
27. POP UP MENU / MENU button
• Press to display the pop-up menu/disc menu/file list.
• Press to change “Original’ and “Playlist” on the TV screen.
28. SEARCH MODE button
• Press to display the search menu.
29. Number buttons
• Press to enter the title/chapter/track/file numbers.
30. OPEN/CLOSE A button
• Press to open or close the disc tray.
31. DIMMER button
• Press to adjust the brightness of the front panel display.
Remote Control
10
20
17
15
12
11
9
8
19
16
31
29
27
25
21
14
18
7
13
6
5
4
3
1
2
28
26
24
22
23
30
Note
• [ZOOM], and [RANDOM] are not available for BD.
E5H01UD_V4_EN.book Page 8 Wednesday, October 15, 2008 10:37 AM
9
Introduction Introduction
ENGLISH
ENGLISH
You can adjust the brightness of the display by the pressing [DIMMER] repeatedly. The brightness
changes as bright A dimmer A auto each time you press [DIMMER]. If you select auto, the display
gets dimmer during playback.
Front Panel Display
Adjusting the Brightness of the Display
Note
• [DIMMER] is not available when the setup menu is displayed.
DIGITAL + DTS
Tr u e H D D T S- H D
VSS MP3 WMA
PL x HDCD ANGLE
L. PCM MPEG .MIX
2 CH MULTIHDMISUPER AU D I O
HD DVD
BD SD USB NET
PROG RAND
1A-B
VCD
GROUP TITLE TRACK TOTAL SING REMCHA P
11
1
12 8 710 9
2 3 5 64
13
14
AΑC
1. B : Appears when playing back a disc.
F : Appears when playback is paused.
2. Appears during program playback.
3. Appears during random playback.
4. Appears during repeat playback.
5. These indicate the format being decoded.
• This is not a indication of the recorded
format or the format that will be output.
6. Appears when playing back a multi angle
disc.
7. Appears when playing back a multi-channel
audio disc.
8. Appears when playing back a 2-channel
audio disc.
9. Indicates the time display mode.
10. These indicate the type of the different
sections of the currently playing disc.
11. Appears when HDMI video or audio signals
are being output.
Does not appear when HDMI connection is
not verified.
12. Indicates the type of the currently playing
disc.
13. Appears when inserting an SD Memory Card.
14. Appears various type of information on the
disc, the elapsed playing time, etc.
TOTAL : Appears when displaying the
total remain/elapsed time of
audio CD.
SING : Appears when sound data is
being played or sound data is
highlighted in program menu.
REM : Appears when displaying
remaining time.
Examples of Displays during Operation
Display Description
Power on
Standby mode
Tray open
Tray is closing
Loading the disc
No disc inserted
No SD Memory Card inserted
This unit cannot read the disc or SD Memory Card inserted.
Stop mode.
HDMI output mode(480i) is selected.
HDMI output mode(480p) is selected.
HDMI output mode(720p) is selected.
HDMI output mode(1080i) is selected.
HDMI output mode(1080p) is selected.
HDMI output mode(1080p24 frame) is selected.
Pure direct mode is set to pure direct off.
Pure direct mode is set to front panel display off.
The total number of the track that has been registered for the
program playback and track number currently selected.
The total number of the files that has been registered for the
program playback and folder/file number currently selected.
When the root folder is selected "ROOT" is displayed.
"All Clear" for program playback setting is selected.
Note
• When playing back the disc that contains more than 100 titles, display of the chapter and time
on the front panel display will be moved a few dots to the right.
E5H01UD_V4_EN.book Page 9 Wednesday, October 15, 2008 10:37 AM
10
Connections
ENGLISH
ENGLISH
Connections
Connecting this unit to device with an HDMI jack using an HDMI cable enables digital transfer of both
digital video signals and multi-channel audio signals.
After making the connection, please make HDMI settings on setup menu according to your display
device. Refer to page 28-30.
Connecting this unit to display device and an amplifier/receiver with an HDMI jack using HDMI cables
enables digital surround sound with high quality video.
Press <HDMI RESOLUTION> to select the HDMI output mode. HDMI video resolution changes as
following.
Connecting to a Display Device with HDMI Cable
Cables not included.
Please purchase the necessary cables at your local store.
Connecting to a Display Device and an Amplifier/Receiver with HDMI Cable
Cables not included.
Please purchase the necessary cables at your local store.
HDMI OUT
To HDMI Input jack
HDMI cable
A display device with an HDMI compatible port
display device
this unit
HDMI OUT
HDMI IN
HDMI IN
HDMI OUT
Front Speaker (left)
Center
Speaker
Front Speaker (right)
HDMI cable
Surround Speaker (left)
Surround Speaker (right)
HDMI cable
Surround
back (For
7.1-channel)
(left)
Surround
back (For
7.1-channel)
(right)
Subwoofer
display device
amplifier
this unit
HDMI Output Mode and Actual Output Signals
Front Panel Display HDMI Video Resolution
480 Interlaced
Press <HDMI RESOLUTION>
480 Progressive
Press <HDMI RESOLUTION>
720 Progressive
Press <HDMI RESOLUTION>
1080 Interlaced
Press <HDMI RESOLUTION>
1080 Progressive
Press <HDMI RESOLUTION>
1080 Progressive 24 frame
Press <HDMI RESOLUTION>
Note
• After you select a HDMI output mode, corresponding HDMI video resolution will be output.
Then if the connected display device is not compatible with the HDMI video resolution, this unit
will output the next HDMI video resolution in order until this unit finds the HDMI video
resolution that is supported by connected display device.
•During BD playback,<HDMI RESOLUTION> is not available.
• Video and audio signals may distorted temporarily when switching to/from the HDMI output
mode.
• You can also change the HDMI output mode from “HDMI Video Resolution” in the “Video” menu
on the setup menu. Refer to page 29.
• In order to get natural and high quality film reproduction of 24-frame film material, select
“1080p24” if the connected display device is compatible with 1080p24 frame input.
• Even if you set to “1080p24” for the “HDMI Video Resolution”, when the contents of the disc is
not compatible for 1080p24 frame, 1080p60 frame will be output.
E5H01UD_V4_EN.book Page 10 Wednesday, October 15, 2008 10:37 AM
11
Connections Connections
ENGLISH
ENGLISH
When using HDMI connections make the “HDMI Audio Out” settings in the “Audio” menu on the
setup menu according to the specifications of the device or monitor to be connected.
䡵 Audio signals output from HDMI OUT
*
1
If “BD Audio Mode” is set to “Mix Audio Output” audio will be output as multi LPCM. Refer to page 22.
*
2
Outputs audio signals decoded from independent substream.
*
3
Outputs audio signals decoded from Dolby Digital stream.
*
4
Outputs audio signals decoded from DTS core stream.
• If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as Multi
LPCM or 2ch Downmix LPCM depending of the capability of the connected device, even if you
select “HDMI Multi(Normal)” in “HDMI Audio Out” setting. Refer to page 30.
* HDMI: High-Definition Multimedia Interface
After you made all necessary connections, connect the AC cord to the AC IN. Then connect the AC
cord to the AC outlet.
Audio Setting
Device to be connected “HDMI Audio Out” setting Output HDMI audio signal
Device compatible with DTS,
DTS-HD, Dolby Digital, Dolby
Digital Plus or Dolby TrueHD
decoding
HDMI Multi(Normal) Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS, or DTS-HD
bitstream are output from HDMI
OUT. Make the speaker settings on
the connected AV amplifier, etc.
Device compatible with 3 or
more channels of audio inputs
(not DTS, DTS-HD, Dolby Digital,
Dolby Digital Plus or Dolby
TrueHD compatible)
HDMI Multi(LPCM)
Multi-channel audio signals are
output from the HDMI terminal.
Make the speaker settings with the
speaker setting items appear after
you select “HDMI Multi(LPCM)”.
Refer to page 30.
Device compatible with 2-
channel audio input or device
not compatible with audio input
HDMI 2ch Down-mixed 2-channel audio
signals are output from HDMI
OUT.
Disc type Audio recording
format
“HDMI Audio Out” setting
HDMI Multi(Normal) HDMI Multi(LPCM) HDMI 2ch
BD-video
Dolby Digital
Dolby Digital*
1
Multi LPCM 2ch Downmix LPCM
Dolby Digital Plus
Dolby Digital Plus*
1
Multi LPCM*
2
2ch Downmix LPCM
Dolby TrueHD
Dolby TrueHD*
1
Multi LPCM*
3
2ch Downmix LPCM
DTS
DTS*
1
Multi LPCM 2ch Downmix LPCM
DTS-HD
DTS-HD*
1
Multi LPCM*
4
2ch Downmix LPCM
LPCM Multi LPCM Multi LPCM 2ch Downmix LPCM
DVD-video
Dolby Digital Dolby Digital Multi LPCM 2ch Downmix LPCM
DTS DTS Multi LPCM 2ch Downmix LPCM
LPCM Multi LPCM Multi LPCM 2ch Downmix LPCM
DivX
®
Dolby Digital Dolby Digital Multi LPCM 2ch Downmix LPCM
MP3/MP2 2ch LPCM 2ch LPCM 2ch LPCM
audio CD/ MP3/Windows
Media™ Audio
2ch LPCM 2ch LPCM 2ch LPCM
DTS-CD DTS Multi LPCM 2ch Downmix LPCM
Copyright protection system
To play back the digital video images of a BD/DVD via an HDMI connection, it is necessary that both
the unit and the display device (or an AV amplifier) support a copyright protection system called
HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that
comprises data encryption and authentication of the connected AV device. This unit supports HDCP.
Please read the operating instructions of your display device or AV amplifier) for more information.
Note
• When using HDCP-incompatible display device, the image will not be viewed properly.
• Among the devices that support HDMI, some devices can control other devices via the HDMI
jack, this unit cannot be controlled by another device via the HDMI jack.
• The audio signals from the HDMI jack (including the sampling frequency, the number of
channels and bit length) maybe limited by the device that is connected.
• Among the monitors that support HDMI, some do not support audio output (e.g, projectors). In
connections with device such as this unit, audio signals are not output from the HDMI output
jack.
Connecting the AC Cord
Supplied cables used in this connection are as follows:
• AC cord x 1
Note
• Insert the plugs securely. Incomplete connections will result in the generation of noise.
AC IN
RS-232C
STRAIGHT CABLE
ROOM TO ROOM
REMOTE CONTROL
HDMI OUT
OUT
IN
AC cord
AC 120 V, 60 Hz
AC outlet
E5H01UD_V4_EN.book Page 11 Wednesday, October 15, 2008 10:37 AM
12
Playback
ENGLISH
ENGLISH
Playback
DVD-2500BTCI
BLU-RAY DISC PLAYER
HDMI
RESOLUTION
SD CARD
ON / STANDBY
A
[U / V / Y / Z]
C
[POWER ON]
B
[ENTER]
A
B
C
<ON/STANDBY>
About the button names in this explanation
< >: Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Buttons on the main unit and remote control
Direct Playback
1
Press <ON/STANDBY> or [POWER ON].
2
Turn on the display device and select the HDMI
input on the device.
3
Press A to open the disc tray.
4
Place the disc on the disc tray with its label side
facing up.
5
Press A to close the disc tray.
Some discs may start playback automatically.
6
Press B to start playback.
For many of BD-video and DVD-video, a menu screen
may appear.
In this case, use [U / V / Y / Z] to select the desired
item, then press [ENTER].
7
Press C once to stop playback temporarily.
Refer to “Resume Playback” on page 14.
To eject the disc:
Press A to open the disc tray, then remove the disc
before turning off the unit.
DVD-V
DVD-VR
CD
BD-V
Align the disc to the
disc tray guide.
It may take a while to load
the disc.
Note
• may appear at the top-right on the screen when the
operation is prohibited by the disc or this unit.
• During the playback of 2-layered disc, pictures may stop for a
moment. This happens when the 1st layer switches to the
2nd layer. This is not a malfunction.
• The operation may vary when you play back BD/DVD with
disc menu. Refer to the manual accompanying the disc for
details.
E5H01UD_V4_EN.book Page 12 Wednesday, October 15, 2008 10:37 AM
13
ENGLISH
Playback Playback
ENGLISH
Many of BD and DVD disc contains Disc menu (DVD), Title menu
(BD/DVD) or Pop-up menu (BD-video) which describes the
contents of the disc, or a disc menu, which guides you through the
available functions in the disc. The contents of the menus may
differ depending on the discs.
Disc menu (DVD)
1) Press [POP UP MENU / MENU].
• The disc menu will appear.
2) Use [U / V / Y / Z] to select an item, then press [ENTER].
Title menu (BD/DVD)
1) Press [TOP MENU].
2) Use [U / V / Y / Z] to select an item, then press [ENTER].
Pop-up menu (BD-video)
• This is a special feature available for some BD. When you
press [POP UP MENU / MENU], a menu pops out on the
screen while the contents still play back.
1) During BD playback, press [POP UP MENU / MENU].
2) Use [U / V / Y / Z] to select an item, then press [ENTER].
When you are playing back a VR mode DVD-RW/-R, you can
choose “Original” or “Playlist” if the disc contains a “Playlist”.
1) In stop mode, press [POP UP MENU / MENU] to call up the
DVD menu.
2) Use [Y / Z] to select “Original” or “Playlist”.
3) Use [U / V] to select desired title, then press [ENTER].
1) During playback, press F.
Playback will be paused.
2) Press B to return to normal playback.
DVD-2500BTCI
BLU-RAY DISC PLAYER
HDMI
RESOLUTION
SD CARD
ON / STANDBY
[U / V / Y / Z]
[POP UP MENU /
MENU]
[ENTER]
B
g
h
C
B
C
h
g
F
[TOP MENU]
F
About the button names in this explanation
< >: Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Buttons on the main unit and remote control
Operations Using Disc Menu, Title Menu, and Popup
Menu
Note
• If the feature is not available, may appear on the TV
screen.
• Contents of menus and corresponding menu operations may
vary among discs. Refer to the manual accompanying the
disc for details.
DVD-V
DVD-VR
BD-V
Playing Back a VR mode DVD-RW/-R
Note
• “Original” is the title which is actually recorded on the disc.
• Playlist is edited version of the Original.
• DVD menu varies depending on discs.
• If the disc does not contain Playlist, Playlist will not be
displayed on the DVD menu.
Pause
Note
• For BD, DVD and DivX
®
, set “Still Mode” to “Field” in the
“Video” menu if pictures in the pause mode are blurred (refer
to page 29).
DVD-VR
Original Playlist
1 CH2 SLP
2 06/2/8 AM11.03 1CH EP
3 4CH XP
1/1
F
E5H01UD_V4_EN.book Page 13 Wednesday, October 15, 2008 10:37 AM
14
Playback Playback
ENGLISH
ENGLISH
1) During playback, press C.
• Resume message will appear on the screen.
2) Press B.
In a few seconds, playback will resume from the point at which
it stopped last. To cancel the resume playback and start
playing back the disc from the beginning, press C again while
the playback is stopped.
1) During playback, press h or g repeatedly to select a
desired forward or reverse speed.
2) Press B to return to normal playback.
• For BD and DVD, speed changes in 5 different levels. For
audio CD, MP3, Windows Media™ Audio, and DivX
®
, speed
changes in 3 different levels.
• For audio CD, MP3 and Windows Media™ Audio, sound will
be output at any speed of fast forward and reverse search.
1) During playback, press F.
2) Press g.
• Slow motion playback will begin and sound will be muted.
3) Press g repeatedly to select a desired speed.
• Slow forward speed changes in 3 different levels.
4) Press B to return to normal playback.
1) During playback, press F.
• Playback will pause and sound will be muted. The disc
advances frame by frame each time F is pressed.
2) Press B to return to normal playback.
Resume Playback
Note
• For MP3, JPEG or Windows Media™ Audio, playback will
resume from the beginning of the current file.
• The resume information will be saved even when the power
is turned off.
• If you unplug the AC cord, open the disc tray or press C again
in stop mode, the resume information will be cleared.
• Resume playback may not be available for the BD that
supports Java applications (BD-J).
Resume ON
Press 'PLAY' to play from here. To play the beginning,
press 'STOP' first and then 'PLAY'.
Fast Forward / Fast Reverse Playback
Note
• For MP3 and Windows Media™ Audio, fast forward/fast
reverse search between different files are not available.
• For audio CD, fast forward/fast reverse search between
different titles are not available during the program playback.
•For some DivX
®
files, fast forward/fast reverse search may not
function.
Slow Forward Playback
Note
• Set “Still Mode” to “Field” in the “Video” menu if pictures in
the slow playback mode are blurred (refer to page 29).
• Slow reverse is not available.
BD-V
DivX
®
DVD-V
DVD-VR
CD
MP3
WMA
1
234
1234
5
5
h Button
g Button
DVD-V
DVD-VR
BD-V
DivX
®
21 3
g Button
Step by Step Playback
Note
• Set “Still Mode” to “Field” in the “Video” menu if pictures in
the pause mode are blurred (refer to page 29).
• Only step by step forward is available.
DVD-V
DVD-VR
BD-V
DivX
®
F
<Example: BD>
E5H01UD_V4_EN.book Page 14 Wednesday, October 15, 2008 10:37 AM
15
ENGLISH
Playback Playback
ENGLISH
This function plays back approximately at 1.3 times of normal
playback with sound being output. This function is available only
on discs recorded in the Dolby Digital format.
1) During playback, press [MODE] repeatedly until the dialog
speed setting appears.
2) Press [ENTER] or [Y / Z] to switch (x1.3), or off.
3) Press B to return to normal playback.
Available repeat function may vary depending on the discs.
1) During playback, press [REPEAT] repeatedly until desired
repeat mode appears on the screen.
The following repeat modes are available.
Desired section can be played back repeatedly.
1) Press [A-B REPEAT] at the desired starting point A.
2) Press [A-B REPEAT] at the desired ending point B.
• The repeat sequence begins.
3) Press [A-B REPEAT] to exit the sequence.
DVD-2500BTCI
BLU-RAY DISC PLAYER
HDMI
RESOLUTION
SD CARD
ON / STANDBY
[U / V / Y / Z]
[ENTER]
[MODE]
BC
[CLEAR]
[RANDOM]
[REPEAT]
[A-B REPEAT]
B
CG
H
GH
[RETURN]
About the button names in this explanation
< >: Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Buttons on the main unit and remote control
Dialog Speed
“Off” : Plays back in normal speed.
““
: Plays back approximately at 1.3 times of normal
playback.
Note
•Every time you press
C
, the setting will be turned “Off”.
• Subtitle can be viewed during this function.
• Picture control, and audio language setting cannot be
changed during this function.
• Virtual surround does not function during this function.
• This function may not work at some points on a disc.
• During this function, 2ch LPCM sound will be output.
DVD-V
DVD-VR
BD-V
Off
Repeat Playback
Repeat mode Available media
Chapter repeat
The current chapter will be
played back repeatedly.
Title repeat
The current title will be
played back repeatedly.
Track repeat
The current track or file will
be played back repeatedly.
Group repeat
The current folder will be
played back repeatedly.
All repeat
All titles, tracks or files in
the media will be played
back repeatedly.
A-B Repeat
BD-V
DVD-V
DVD-VR
BD-V
DVD-V
DVD-VR
CD
MP3
WMA
JPEG
DivX
®
MP3
WMA JPEG
DivX
®
DVD-VR
CD
MP3
WMA JPEG
DivX
®
BD-V
DivX
®
DVD-V
DVD-VR
CD
E5H01UD_V4_EN.book Page 15 Wednesday, October 15, 2008 10:37 AM
16
Playback Playback
ENGLISH
ENGLISH
You can program the disc to play back in your desired order.
1) In stop mode, press [MODE].
• The program screen will appear.
2) Use [U / V] to select a track/file, then press [ENTER].
• For MP3, Windows Media™ Audio, and JPEG, use [U / V] to
select a folder, then press [ENTER] first, and then use
[U / V] to select a track/file, then press [ENTER].
• Press [CLEAR] to erase the last track/file of the program.
• Select “All Clear” at the bottom of the list to erase all the
tracks/files in the program.
• The programmed track/file is displayed in the right hand
screen.
• If the entire program cannot be displayed on the screen, “L”
or “K” appears.
•Use [Y / Z] to go back forward between the hierarchy of
folders.
• If eight or more tracks/files were set in a program, use the
H / G to see all the tracks/files.
3) Press B to start program playback.
• Program playback will start.
This function shuffles the play back order of tracks/files.
1) In stop mode, press [RANDOM].
2) Press B to start random playback.
Note
• The chapter/title/track/group repeat setting will be cleared
when moving to other chapter, title, track/file or folder.
• Repeat playback does not function during A-B repeat
playback.
• Repeat chapter/title is not available with some scenes.
• A-B Repeat can only be set within the current title or current
track/file.
• A-B Repeat is not available with some scenes.
• To cancel the A point which was set, press [CLEAR].
• A-B Repeat playback does not function during chapter, title,
track, group or all repeat playback.
•For some DivX
®
files, A-B Repeat playback may not function.
Program Playback
JPEG
MP3
WMA
CD
1/1
MY COLLECTION
All Clear
Program
ABC
DEF
GHI
ABC
1/1
<Example : MP3>
Note
• During the program playback, press C once to set the resume
point, and then press B to resume the program playback
from where C was pressed (audio CD) or from beginning of
the file where C was pressed (MP3, Windows Media™ Audio,
or JPEG).
• During the program playback, press C twice to display the
program screen. To go back to the normal program playback,
press [RETURN] to exit from the program screen, then press
B.
• Your program is still stored until either the disc tray is open or
power is turned off.
• Up to 99 tracks/files can be entered.
• To repeat the current track/file in the program, press
[REPEAT] repeatedly until “ Track” appears during play
back. To repeat the entire program press [REPEAT]
repeatedly until “ All” appears during playback.
• Even if an inserted disc contains mixed MP3, JPEG and
Windows Media™ Audio files, program function allows 99 files
in combination of MP3, JPEG and Windows Media™ Audio
files.
• The current selected number on the front panel display blinks
while setting the program playback.
• “F***” is displayed in the front panel display while selecting
the folder.( *** is folder number.), and file is displayed as
“-****” after the folder indication.
• Playback from a desired track/ file and random playback are
not available during program playback.
Random Playback
Note
• During the random playback, press C once to set the resume
point, and then press B to resume the random playback
fromwhere C was pressed (audio CD) or from beginning of
the file where C was pressed (MP3, Windows Media™ Audio,
or JPEG).
• During the random playback, press C twice to display the
random playback screen. To cancel the random playback,
press [RANDOM] when the random playback screen is
displayed.
• To repeat the current track/file in the random selection, press
[REPEAT] repeatedly until “ Track” appears during
playback. To repeat the entire random selection press
[REPEAT] repeatedly until “ All” appears during
playback.
• You cannot go back to the previous track/file during random
playback.
• For a disc containing mixed MP3, JPEG and Windows Media™
Audio files, random playback of those files will be performed.
• “RAND” is displayed on the front panel display.
JPEG
MP3
WMA
CD
CD-DA 0:45:55
Random Program
--no indication--
Random
Total
<Example: audio CD>
E5H01UD_V4_EN.book Page 16 Wednesday, October 15, 2008 10:37 AM
17
ENGLISH
Playback Playback
ENGLISH
This function allows you to enlarge the video image and to pan
through the zoomed image.
1) Press [ZOOM] during playback.
• Playback will continue.
2) Press [ZOOM] repeatedly to select a desired zoom factor:
x1.2, x1.5, x2.0, x4.0 or off.
• “x4.0” zoom is not available for JPEG and DivX
®
.
3) Use [U / V / Y / Z] to move the zoomed picture across the
screen.
4) Press [ZOOM] to exit zoom mode.
Some BD and DVD contain scenes which have been shot
simultaneously from various angles. You can change the camera
angle when appears on the screen.
1) Press [ANGLE] during playback.
• The selected angle will be displayed on the display bar at the
top of the screen.
2) Use [U / V] to select your desired angle.
䡵 Using H / G
1) Press G to skip to the next chapter, track or file during
playback.
To go back to the previous chapter, track or file, press H
twice in quick successions.
䡵 Using [SEARCH MODE]
1. By using the [SEARCH MODE], you can select following search
options.
DVD-2500BTCI
BLU-RAY DISC PLAYER
HDMI
RESOLUTION
SD CARD
ON / STANDBY
[U / V / Y / Z]
G
H
[ANGLE]
[ZOOM]
[SEARCH MODE]
[ENTER]
[RETURN]
HG
[DISPLAY]
[the Number buttons]
[CLEAR]
About the button names in this explanation
< >: Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
Zoom
Note
• For BD, zoom function is not available.
• Zoom function does not work while disc menu is shown.
• Navigation screen is not available on JPEG.
• You cannot pan through the zoomed picture on some JPEG
files.
• For some DVD, “x4.0” zoom is not available.
•For DivX
®
files with small image, zoom function is not
available.
•For DivX
®
, depending on the size of the image, some zoom
factor may not be available.
DVD-V
DVD-VR
JPEG
DivX
®
x2.0 x1.2 x1.5
x4.0
Camera Angle
Note
• If the “Angle Icon” setting is “Off” in the “Others” menu,
will not appear. Refer to page 33.
Search
Note
• If title contains no chapters, H / G changes the title.
Search mode Available media
/
Title / Chapter search
Track Search
Time Search
Marker Search
BD-V
DVD-V
BD-V
DVD-V
DVD-VR
CD
MP3
WMA
JPEG
DivX
®
BD-V
DVD-V
DVD-VR
CD
DivX
®
BD-V
DVD-V
DVD-VR
CD
E5H01UD_V4_EN.book Page 17 Wednesday, October 15, 2008 10:37 AM
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/